IBM 2943 User manual

Power Systems
PCI adapter placement for the
8202-E4B, 8202-E4C, 8202-E4D,
8205-E6B, 8205-E6C, or 8205-E6D
IBM

Power Systems
PCI adapter placement for the
8202-E4B, 8202-E4C, 8202-E4D,
8205-E6B, 8205-E6C, or 8205-E6D
IBM

Note
Before using this information and the product it supports, read the information in “Safety notices” on page v, “Notices” on
page 55, the IBM Systems Safety Notices manual, G229-9054, and the IBM Environmental Notices and User Guide, Z125–5823.
This edition applies to IBM Power Systems servers that contain the POWER7 processor and to all associated
models.
© Copyright IBM Corporation 2010, 2019.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.

Contents
Safety notices ................................. v
PCI adapter placement for the 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, or
8205-E6D ................................... 1
Supported PCI adapters for the 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, or 8205-E6D ....... 1
PCI adapter placement rules and slot priorities for the 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, or
8205-E6D .................................... 20
I/O expansion units ................................ 50
PCI slot priorities for the 5796 expansion unit ....................... 50
PCI slot priorities for the 5802 and 5877 expansion units ................... 51
Determining the best place to install your adapter ...................... 52
Finding the current system configuration in IBM i ..................... 52
Notices ................................... 55
Trademarks ................................... 56
Electronic emission notices .............................. 56
Class A Notices ................................. 56
Class B Notices ................................. 60
Terms and conditions ................................ 63
© Copyright IBM Corp. 2010, 2019 iii

iv Power Systems: PCI adapter placement for the IBM Power 720 Express or IBM Power 740 Express

Safety notices
Safety notices may be printed throughout this guide:
vDANGER notices call attention to a situation that is potentially lethal or extremely hazardous to
people.
vCAUTION notices call attention to a situation that is potentially hazardous to people because of some
existing condition.
vAttention notices call attention to the possibility of damage to a program, device, system, or data.
World Trade safety information
Several countries require the safety information contained in product publications to be presented in their
national languages. If this requirement applies to your country, safety information documentation is
included in the publications package (such as in printed documentation, on DVD, or as part of the
product) shipped with the product. The documentation contains the safety information in your national
language with references to the U.S. English source. Before using a U.S. English publication to install,
operate, or service this product, you must first become familiar with the related safety information
documentation. You should also refer to the safety information documentation any time you do not
clearly understand any safety information in the U.S. English publications.
Replacement or additional copies of safety information documentation can be obtained by calling the IBM
Hotline at 1-800-300-8751.
German safety information
Das Produkt ist nicht für den Einsatz an Bildschirmarbeitsplätzen im Sinne § 2 der
Bildschirmarbeitsverordnung geeignet.
Laser safety information
IBM®servers can use I/O cards or features that are fiber-optic based and that utilize lasers or LEDs.
Laser compliance
IBM servers may be installed inside or outside of an IT equipment rack.
© Copyright IBM Corp. 2010, 2019 v

DANGER
When working on or around the system, observe the following precautions:
Electrical voltage and current from power, telephone, and communication cables are hazardous. To
avoid a shock hazard:
vConnect power to this unit only with the IBM provided power cord. Do not use the IBM
provided power cord for any other product.
vDo not open or service any power supply assembly.
vDo not connect or disconnect any cables or perform installation, maintenance, or reconfiguration
of this product during an electrical storm.
vThe product might be equipped with multiple power cords. To remove all hazardous voltages,
disconnect all power cords.
vConnect all power cords to a properly wired and grounded electrical outlet. Ensure that the outlet
supplies proper voltage and phase rotation according to the system rating plate.
vConnect any equipment that will be attached to this product to properly wired outlets.
vWhen possible, use one hand only to connect or disconnect signal cables.
vNever turn on any equipment when there is evidence of fire, water, or structural damage.
vDisconnect the attached power cords, telecommunications systems, networks, and modems before
you open the device covers, unless instructed otherwise in the installation and configuration
procedures.
vConnect and disconnect cables as described in the following procedures when installing, moving,
or opening covers on this product or attached devices.
To Disconnect:
1. Turn off everything (unless instructed otherwise).
2. Remove the power cords from the outlets.
3. Remove the signal cables from the connectors.
4. Remove all cables from the devices.
To Connect:
1. Turn off everything (unless instructed otherwise).
2. Attach all cables to the devices.
3. Attach the signal cables to the connectors.
4. Attach the power cords to the outlets.
5. Turn on the devices.
(D005)
DANGER
vi Power Systems: PCI adapter placement for the IBM Power 720 Express or IBM Power 740 Express

Observe the following precautions when working on or around your IT rack system:
vHeavy equipment–personal injury or equipment damage might result if mishandled.
vAlways lower the leveling pads on the rack cabinet.
vAlways install stabilizer brackets on the rack cabinet.
vTo avoid hazardous conditions due to uneven mechanical loading, always install the heaviest
devices in the bottom of the rack cabinet. Always install servers and optional devices starting
from the bottom of the rack cabinet.
vRack-mounted devices are not to be used as shelves or work spaces. Do not place objects on top
of rack-mounted devices.
vEach rack cabinet might have more than one power cord. Be sure to disconnect all power cords in
the rack cabinet when directed to disconnect power during servicing.
vConnect all devices installed in a rack cabinet to power devices installed in the same rack
cabinet. Do not plug a power cord from a device installed in one rack cabinet into a power
device installed in a different rack cabinet.
vAn electrical outlet that is not correctly wired could place hazardous voltage on the metal parts of
the system or the devices that attach to the system. It is the responsibility of the customer to
ensure that the outlet is correctly wired and grounded to prevent an electrical shock.
CAUTION
vDo not install a unit in a rack where the internal rack ambient temperatures will exceed the
manufacturer's recommended ambient temperature for all your rack-mounted devices.
vDo not install a unit in a rack where the air flow is compromised. Ensure that air flow is not
blocked or reduced on any side, front, or back of a unit used for air flow through the unit.
vConsideration should be given to the connection of the equipment to the supply circuit so that
overloading of the circuits does not compromise the supply wiring or overcurrent protection. To
provide the correct power connection to a rack, refer to the rating labels located on the
equipment in the rack to determine the total power requirement of the supply circuit.
v(For sliding drawers.) Do not pull out or install any drawer or feature if the rack stabilizer brackets
are not attached to the rack. Do not pull out more than one drawer at a time. The rack might
become unstable if you pull out more than one drawer at a time.
v(For fixed drawers.) This drawer is a fixed drawer and must not be moved for servicing unless
specified by the manufacturer. Attempting to move the drawer partially or completely out of the
rack might cause the rack to become unstable or cause the drawer to fall out of the rack.
(R001)
Safety notices vii

CAUTION:
Removing components from the upper positions in the rack cabinet improves rack stability during
relocation. Follow these general guidelines whenever you relocate a populated rack cabinet within a
room or building:
vReduce the weight of the rack cabinet by removing equipment starting at the top of the rack
cabinet. When possible, restore the rack cabinet to the configuration of the rack cabinet as you
received it. If this configuration is not known, you must observe the following precautions:
– Remove all devices in the 32U position and above.
– Ensure that the heaviest devices are installed in the bottom of the rack cabinet.
– Ensure that there are no empty U-levels between devices installed in the rack cabinet below the
32U level.
vIf the rack cabinet you are relocating is part of a suite of rack cabinets, detach the rack cabinet from
the suite.
vInspect the route that you plan to take to eliminate potential hazards.
vVerify that the route that you choose can support the weight of the loaded rack cabinet. Refer to the
documentation that comes with your rack cabinet for the weight of a loaded rack cabinet.
vVerify that all door openings are at least 760 x 230 mm (30 x 80 in.).
vEnsure that all devices, shelves, drawers, doors, and cables are secure.
vEnsure that the four leveling pads are raised to their highest position.
vEnsure that there is no stabilizer bracket installed on the rack cabinet during movement.
vDo not use a ramp inclined at more than 10 degrees.
vWhen the rack cabinet is in the new location, complete the following steps:
– Lower the four leveling pads.
– Install stabilizer brackets on the rack cabinet.
– If you removed any devices from the rack cabinet, repopulate the rack cabinet from the lowest
position to the highest position.
vIf a long-distance relocation is required, restore the rack cabinet to the configuration of the rack
cabinet as you received it. Pack the rack cabinet in the original packaging material, or equivalent.
Also lower the leveling pads to raise the casters off of the pallet and bolt the rack cabinet to the
pallet.
(R002)
(L001)
(L002)
viii Power Systems: PCI adapter placement for the IBM Power 720 Express or IBM Power 740 Express

(L003)
or
All lasers are certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for class
1 laser products. Outside the U.S., they are certified to be in compliance with IEC 60825 as a class 1 laser
product. Consult the label on each part for laser certification numbers and approval information.
CAUTION:
This product might contain one or more of the following devices: CD-ROM drive, DVD-ROM drive,
DVD-RAM drive, or laser module, which are Class 1 laser products. Note the following information:
vDo not remove the covers. Removing the covers of the laser product could result in exposure to
hazardous laser radiation. There are no serviceable parts inside the device.
vUse of the controls or adjustments or performance of procedures other than those specified herein
might result in hazardous radiation exposure.
(C026)
Safety notices ix

CAUTION:
Data processing environments can contain equipment transmitting on system links with laser modules
that operate at greater than Class 1 power levels. For this reason, never look into the end of an optical
fiber cable or open receptacle. (C027)
CAUTION:
This product contains a Class 1M laser. Do not view directly with optical instruments. (C028)
CAUTION:
Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the following
information: laser radiation when open. Do not stare into the beam, do not view directly with optical
instruments, and avoid direct exposure to the beam. (C030)
CAUTION:
The battery contains lithium. To avoid possible explosion, do not burn or charge the battery.
Do Not:
v___ Throw or immerse into water
v___ Heat to more than 100°C (212°F)
v___ Repair or disassemble
Exchange only with the IBM-approved part. Recycle or discard the battery as instructed by local
regulations. In the United States, IBM has a process for the collection of this battery. For information,
call 1-800-426-4333. Have the IBM part number for the battery unit available when you call. (C003)
Power and cabling information for NEBS (Network Equipment-Building System)
GR-1089-CORE
The following comments apply to the IBM servers that have been designated as conforming to NEBS
(Network Equipment-Building System) GR-1089-CORE:
The equipment is suitable for installation in the following:
vNetwork telecommunications facilities
vLocations where the NEC (National Electrical Code) applies
The intrabuilding ports of this equipment are suitable for connection to intrabuilding or unexposed
wiring or cabling only. The intrabuilding ports of this equipment must not be metallically connected to the
interfaces that connect to the OSP (outside plant) or its wiring. These interfaces are designed for use as
intrabuilding interfaces only (Type 2 or Type 4 ports as described in GR-1089-CORE) and require isolation
from the exposed OSP cabling. The addition of primary protectors is not sufficient protection to connect
these interfaces metallically to OSP wiring.
Note: All Ethernet cables must be shielded and grounded at both ends.
The ac-powered system does not require the use of an external surge protection device (SPD).
The dc-powered system employs an isolated DC return (DC-I) design. The DC battery return terminal
shall not be connected to the chassis or frame ground.
xPower Systems: PCI adapter placement for the IBM Power 720 Express or IBM Power 740 Express

PCI adapter placement for the 8202-E4B, 8202-E4C, 8202-E4D,
8205-E6B, 8205-E6C, or 8205-E6D
Find information about the Peripheral Component Interconnect (PCI), PCI-X, and PCI Express (PCIe)
adapters that are supported for the 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, or 8205-E6D
systems that contain the POWER7®processor and the associated I/O expansion units.
The following features are electromagnetic compatibility (EMC) Class B features. See the Class B Notices
in the Hardware Notices section.
Table 1. Electromagnetic compatibility (EMC) Class B features
Feature Description
1912, 5736 PCI-X DDR 2.0 Dual Channel Ultra320 SCSI Adapter
1983, 5706 Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
1986, 5713 1 Gb iSCSI TOE PCI-X Adapter
2728 4-port USB PCIe Adapter
4764 PCI-X Cryptographic Coprocessor
4807 PCIe Cryptographic Coprocessor
5717 4-port 10/100/1000 Base-TX PCI Express Adapter
5732 10 Gb Ethernet-CX4 PCI Express Adapter
5748 POWER®GXT145 PCI Express Graphics Accelerator
5767 2-port 10/100/1000 Base-TX Ethernet PCI Express Adapter
5768 2-port Gb Ethernet-SX PCI Express Adapter
5769 10 Gb Ethernet-SR PCI Express Adapter
5772 10 Gb Ethernet-LR PCI Express Adapter
5785 4 Port Async EIA-232 PCIe Adapter
EC2G and EL39 PCIe LP 2-Port 10 GbE SFN6122F Adapter
EC2H and EL3A PCIe LP 2-Port 10 GbE SFN5162F Adapter
EC2J PCIe 2-Port 10 GbE SFN6122F Adapter
EC2K PCIe 2-Port 10 GbE SFN5162F Adapter
Supported PCI adapters for the 8202-E4B, 8202-E4C, 8202-E4D,
8205-E6B, 8205-E6C, or 8205-E6D
Find information about the Peripheral Component Interconnect (PCI), PCI-X, and PCI Express (PCIe)
adapters that are supported for the 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, or 8205-E6D
systems that contain the POWER7 processor and the associated I/O expansion units.
This section provides reference information that information technology (IT) personnel and service
representatives can use in determining where to place PCI, PCI-X, and PCIe adapters in the 8202-E4B,
8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, or 8205-E6D system and the associated I/O expansion units.
© Copyright IBM Corp. 2010, 2019 1

Adapters supported on the AIX®, IBM i, or Linux operating system
Table 2 and Table 3 on page 7 list the adapters supported in the systems running the AIX, IBM i, or Linux
operating system.
Important:
vThis document does not replace the latest sales and marketing publications and tools that document
supported features.
vBefore adding or rearranging adapters, use the System Planning Tool to validate the new adapter
configuration. See the IBM System Planning Tool website (www.ibm.com/systems/support/tools/
systemplanningtool/).
vIf you are installing a new feature, ensure that you have the software required to support the new
feature and determine whether you must install any existing program temporary fix (PTF)
prerequisites. To do this, use the IBM Prerequisite website (www-912.ibm.com/e_dir/
eServerPrereq.nsf).
PCI and PCI-X adapters
The following table lists PCI and PCI-X adapters supported for the 8202-E4B, 8202-E4C, 8202-E4D,
8205-E6B, 8205-E6C, or 8205-E6D.
The adapters are listed with their feature codes (FC), customer card identification number (CCIN), along
with their description, and the systems on which they are supported.
Table 2. PCI and PCI-X adapters supported in the systems running the AIX, IBM i, or Linux operating system
Feature
code
CCIN Description System supported
2943 3-B 8-port Asynchronous EIA-232E/RS-422A PCI Adapter (FC 2943;
CCIN 3-B)
vPCI bus
v8 Async ports
vOS support: AIX operating system
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5723 5723 2-port Asynchronous EIA-232 PCI Adapter (FC 5723; CCIN
5723)
vPCI adapter
v2-port EIA-232 asynchronous serial communications
v16C850 UART equivalent
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
1905 1910 4 Gb Single-port Fibre Channel PCI-X 2.0 DDR Adapter (FC
1905; CCIN 1910)
vPCI-X 2.0a, PCI 3.0, PCI-X Mode 2 - 266 MHz, PCI-X Mode 1
- 133 MHz, PCI - 66 MHz
vHigh-speed data networking
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
1910 1910 4 Gb Dual-port Fibre Channel PCI-X 2.0 DDR Adapter (FC 1910;
CCIN 1910)
vPCI-X 2.0a, PCI 3.0, PCI-X Mode 2 - 266 MHz, PCI-X Mode 1
- 133 MHz, PCI - 66 MHz
vHigh-speed data networking
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
2Power Systems: PCI adapter placement for the IBM Power 720 Express or IBM Power 740 Express

Table 2. PCI and PCI-X adapters supported in the systems running the AIX, IBM i, or Linux operating
system (continued)
Feature
code
CCIN Description System supported
1977 197E 2 Gb Fibre Channel PCI-X Adapter (FC 1977; CCIN 197E)
vPCI-X, 64-bit
vHigh bandwidth
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5716 280B 2 Gb Fibre Channel PCI-X Adapter (FC 5716; CCIN 280B)
vPCI-X, 64-bit
vHigh bandwidth
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5749 576B 4 Gb Dual-port Fibre Channel PCI-X 2.0 DDR Adapter (FC 5749;
CCIN 576B)
vShort, 64-bit, 3.3 V
vOS support: IBM i operating system
vExtra-high bandwidth
v64-bit slot required
vRecommended in DDR slot
vMaximum of 24 adapters
vMaximum of four per enclosure
vMaximum of two per PCI host bridge
vOS support: IBM i operating system
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5758 1910 4 Gb Single-port Fibre Channel PCI-X 2.0 DDR Adapter (FC
5758; CCIN 1910)
vPCI-X 2.0a, PCI 3.0, PCI-X Mode 2 - 266 MHz, PCI-X Mode 1
- 133 MHz, PCI - 66 MHz
vHigh-speed data networking
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5759 5759 4 Gb Dual-port Fibre Channel PCI-X 2.0 DDR Adapter (FC 5759;
CCIN 5759)
vShort, 64-bit, 3.3 V
vHigh-speed data networking
vExtra-high bandwidth
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
1980 and
2849
1980 POWER GXT135P Graphics Accelerator with digital support (FC
1980; CCIN 1980)
v32-bit PCI interface
v128-bit graphics processor
v8-bit or 24-bit color modes
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
1954 4-port 10/100/1000 Base-TX PCI-X adapter (FC 1954)
vPCI-X 1.0a
vFull-height, 64-bit
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
PCI adapter placement 3

Table 2. PCI and PCI-X adapters supported in the systems running the AIX, IBM i, or Linux operating
system (continued)
Feature
code
CCIN Description System supported
1978 IBM Gigabit Ethernet-SX PCI-X Adapter (FC 1978)
v64-bit PCI-X
vOne full-duplex 1000 Base-SX fiber connection to a gigabit
Ethernet LAN
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
1979 IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (FC 1979)
v64-bit PCI-X
vOne full-duplex 10/100/1000 Base-TX UTP connection to a
gigabit Ethernet
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
1983 5706 2-port 10/100/1000 Base-TX Ethernet PCI-X Adapter (FC 1983;
CCIN 5706)
vTwo full-duplex 10/100/1000 Base-TX UTP connections to
gigabit Ethernet LANs
vHigh bandwidth
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
1986 573B 1-Gb iSCSI TOE PCI-X Adapter (FC 1986; CCIN 573B)
vCopper media adapter
viSCSI TOE (TCP/IP offload engine)
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
1987 573C 1-Gb iSCSI TOE PCI-X Adapter (FC 1987; CCIN 573C)
vOptical media adapter
viSCSI TOE (TCP/IP offload engine)
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5700 5700 IBM Gigabit Ethernet-SX PCI-X Adapter (FC 5700; CCIN 5700)
vOne full-duplex 1000 Base-SX fiber connection to a gigabit
Ethernet LAN
vHigh bandwidth
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5701 5701 IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (FC 5701;
CCIN 5701)
vOne full-duplex 10/100/1000 Base-TX UTP connection to a
gigabit Ethernet
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5706 5706 2-port 10/100/1000 Base-TX Ethernet PCI-X Adapter (FC 5706;
CCIN 5706)
vShort, 32-bit or 64-bit, 3.3 V or 5 V
vHigh bandwidth
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5713 573B 1 Gb-TX iSCSI TOE PCI-X Adapter (FC 5713; CCIN 573B)
vShort, 32-bit or 64-bit, 3.3 V or 5 V
vHigh bandwidth
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
4Power Systems: PCI adapter placement for the IBM Power 720 Express or IBM Power 740 Express

Table 2. PCI and PCI-X adapters supported in the systems running the AIX, IBM i, or Linux operating
system (continued)
Feature
code
CCIN Description System supported
5714 573C 1 Gb iSCSI TOE PCI-X on Optical Media Adapter (FC 5714;
CCIN 573C)
vShort, 32-bit or 64-bit, 3.3 V or 5 V
vHigh bandwidth
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5721 573A 10 Gb Ethernet-SR PCI-X 2.0 DDR Adapter (FC 5721; CCIN
573A)
vHigh bandwidth
vOS support: AIX, IBM i, and Linux operating system
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5722 573A 10 Gb Ethernet-LR PCI-X 2.0 DDR Adapter (FC 5722; CCIN
573A)
vHigh bandwidth
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5740 1954 4-port 10/100/1000 Base-TX PCI-X adapter (FC 5740; CCIN
1954)
vPCI-X 1.0a
vFull-height, 64-bit
vHigh bandwidth
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
2738 28EF 2-port USB PCI Adapter (FC 2738; CCIN 28EF)
vShort, 32-bit
v3.3 or 5 V
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
4764 4764 PCI-X Cryptographic Coprocessor (FC 4764; CCIN 4764)
vShort, 64-bit, 3.3 V
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5900 572A PCI-X DDR Dual-x4 3 Gb SAS Adapter (FC 5900; CCIN 572A)
vShort, 64-bit, 3.3 V
vExtra-high bandwidth
vSupports a dual controller mode in a multi-initiator
configuration
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5902 572B PCI-X DDR Ext Dual-x4 3 Gb SAS RAID Adapter (FC 5902;
CCIN 572B)
vLong, 64-bit, 3.3 V
vExtra-high bandwidth
vThe adapter must be connected and configured in a dual
controller mode in a multi-initiator configuration, and this
configuration requires that the adapters are installed in pairs.
vThis adapter supports disk expansion units. This adapter does
not support media expansion units.
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
PCI adapter placement 5

Table 2. PCI and PCI-X adapters supported in the systems running the AIX, IBM i, or Linux operating
system (continued)
Feature
code
CCIN Description System supported
5908 572F and
575C
PCI-X DDR 1.5 GB cache SAS RAID Adapter (FC 5908; CCIN
572F, 575C)
vLong, 64-bit, 3.3 V
vExtra-high bandwidth
vGeneration 3 blind-swap cassette
vDouble-wide adapter requires two adjacent slots:
– 572F is the CCIN on the SAS controller side of the
double-wide adapter.
– 575C is the CCIN on the write-cache side of the
double-wide adapter.
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5912 572A PCI-X DDR Dual-x4 3 Gb SAS Adapter (FC 5912; CCIN 572A)
vShort, 64-bit, 3.3 V
vExtra-high bandwidth
vSupports a dual controller mode in a multi-initiator
configuration
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
1912 571A PCI-X DDR 2.0 Dual Channel Ultra320 SCSI Adapter (FC 1912;
CCIN 571A)
vShort, 64-bit, 3.3 V
vHigh bandwidth
vOS support: AIX, IBM i, and Linuxoperating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5736 571A PCI-X DDR 2.0 Dual Channel Ultra320 SCSI Adapter (FC 5736;
CCIN 571A)
vShort, 32-bit or 64-bit, 3.3 V
vHigh bandwidth
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5782 571F and
575B
PCI-X Dual Channel Ultra320 SCSI RAID Adapter with
Auxiliary Write Cache (double-wide) (FC 5782; CCIN 571F and
575B)
vLong, 64-bit, 3.3 V, 266 MHz
vDual-mode capable adapter
vExtra-high bandwidth
vDouble-wide adapter, requires two adjacent slots. The SCSI
controller side of the adapter pair requires a 64-bit slot. The
controller side is the side with the external SCSI connectors.
vOS support: IBM i operating system
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
2947 IBM ARTIC960Hx 4-port Multiprotocol PCI Adapter (FC 2947)
v32-bit PCI
vProvides 4-ports with different protocols, EIA-232, EIA530,
RS-449, X.21, or V.35
vOS support: AIX operating system
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
6Power Systems: PCI adapter placement for the IBM Power 720 Express or IBM Power 740 Express

Table 2. PCI and PCI-X adapters supported in the systems running the AIX, IBM i, or Linux operating
system (continued)
Feature
code
CCIN Description System supported
6805 2742 PCI 2-Line WAN IOA (FC 6805; CCIN 2742)
vShort, 32-bit, 66 MHz
vNo IOP
vOS support: IBM i and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
6808 2805 PCI Quad Modem IOA (FC 6808; CCIN 2805)
vLong, 32-bit, 66 MHz
vNon-CIM
vOS support: IBM i operating system
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
6809 2805 PCI Quad Modem IOA (FC 6809; CCIN 2805)
vLong, 32-bit, 66 MHz
vCIM
vOS support: IBM i operating system
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
6833 2793 PCI 2-Line WAN with Modem No IOP (FC 6833; CCIN 2793)
vTwo lines per port WAN with modem adapter
vNon-CIM
vOS support: IBM i and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
6834 2793 PCI 2-Line WAN with Modem No IOP CIM (FC 6834; CCIN
2793)
vTwo lines per port WAN with modem adapter
vCIM
vOS support: IBM i and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
9483 576C PCI Express 2-Line WAN with Modem (FC 9483; CCIN 576C)
vShort, x4, PCIe
vNon-CIM
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C, and
8202-E4D
PCIe adapters
The following table lists PCIe adapters.
Table 3. PCIe adapters supported in the systems running the AIX, IBM i, or Linux operating system
Feature
code
CCIN Description System supported
5277 57D2 4-port Async EIA-232 PCIe 1X LP Adapter (FC 5277; CCIN
57D2)
vLow-profile adapter
vExtra-high bandwidth
vShort, x1
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
PCI adapter placement 7

Table 3. PCIe adapters supported in the systems running the AIX, IBM i, or Linux operating system (continued)
Feature
code
CCIN Description System supported
5289 57D4 PCIe 2-port Async EIA-232 PCIe 1X LPC Adapter (FC 5289;
CCIN 57D4)
vShort, x1
vPCIe 1.1
vTwo ports through RJ45 by using the DB9 connector
vEIA-232 Compatible
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5290 57D4 PCIe LP 2-port Async EIA-232 Adapter (FC 5290; CCIN 57D4)
vLow-profile adapter
vPCIe 1.1
vShort, x8
v2 Ports through RJ45 by using the DB9 connector
vEIA-232 compatible
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5785 57D2 4 Port Async EIA-232 PCIe Adapter (FC 5785; CCIN 57D2)
vShort, x1
vOS support: AIX and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5273 577D 8 Gb PCI Express Dual-port Fibre Channel Adapter (FC 5273;
CCIN 577D)
vLow-profile adapter
vShort, x8
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5276 5774 4-Gb PCI Express Dual-port Fibre Channel Adapter (FC 5276;
CCIN 5774)
vLow-profile adapter
vShort, x4
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
5729 5729 PCIe2 FH 4-port 8 Gb Fibre Channel Adapter (FC 5729; CCIN
5729)
vFull-height, full length adapter with standard-size bracket
vPCIe 2.1, x8
vExtra-high bandwidth
vOS support: AIX, IBM i, and Linux operating systems
8202-E4C, 8202-E4D,
8205-E6C, and 8205-E6D
5735 577D 8 Gb PCI Express Dual-port Fibre Channel Adapter (FC 5735;
CCIN 577D)
vShort, x8
vExtra-high bandwidth: If only one port is planned to be active
in normal operation, the adapter is counted as an extra-high
bandwidth adapter. If both ports are planned to be active, the
adapter must be treated as two extra-high bandwidth
adapters.
vOS support: AIX, IBM i, and Linux operating systems
8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B,
8205-E6C, and 8205-E6D
8Power Systems: PCI adapter placement for the IBM Power 720 Express or IBM Power 740 Express