Ibp Pmk 20 User manual

innovative business promotion gmbh

PMK 20

Instruction manual

HEART RATE MONITOR FOR WOMAN AND MAN

Model: 02-009/M02-160D02-113/M03-008D;

CONTENTS

Congratulations on the purchase of your “Heart rate monitor PMK20” from ibp. To make sure that you use the product correctly, read this instruction booklet

carefully. The product is state of the art.The integrated sport functions such as heart rate and stop watch help make your training more efficient.

EATURES

ELIVERY

ASIC OPERATION OF BUTTONS

ODE CHANGE OPERATION

OW TO SET TIME AND CHIME

OW TO PREPARE FOR HEART RATE MEASUREMENT

QUIPPING THE TRANSMITTER (CHEST STRAP)

EART RATE MEASURING AT PULSE MODE

OW TO USE CHRONOGRAPH (WITH HEART RATE MEASUREMENT)

OW TO SET ALARM

ATTERY REPLACEMENT

ISPOSAL / BATTERY SAFETY NOTE

ARRANTY

Time:

Pulse:

Chronograph:

Alarm:

EL back light

• Display of days, hours, minutes and seconds (or month and day)

• 2 display modes: day and time using „month and day“ or „second“

• 12/24-hour display formats selectable

• Auto calendar from 2000 to 2049

• Hour signal

• Measuring range: 40-240 beats per minute

• Weight setting (20-299kg)

• Alarm signal for heart rate below or above the set rate

• 1/100-second chronograph with working range up to 24 hours

• “Split” time can be taken

• “Elapsed Time” can be displayed

• “Average Heart Rate” can be displayed

• “Time in Zone” can be displayed

• “Calorie Consumption” can be displayed

• Alarm signal for heart rate above the set rate

• Hour signal

• Daily alarm

• Heart Rate Monitor

• Chest strap

• Bicycle fastener

DELIVERY

FEATURES

S4:

• Set (press and hold)

• Re-link watch and transmitter

• Clear chronograph and data (press and hold with

chronograph stopped)

• exit (set)

S3:

S5:

• Mode change

• Select setting (set)

• EL back light

S1:

• Toggle chime on or off

• Start/split of chronograph

• Toggle alarm on or off

• Forward setting (set)

S2:

• Toggle “month and day” or “second” display

• Stop chronograph

• Select data display (chronograph stopped)

• Toggle alarm on or off

• Reverse setting (set)

Press S3 for mode change operation. The sequence is shown as follow:

Remark:

At any mode, press and hold S3 for 3 seconds will change to Time mode directly.

MODE CHANGE OPERATION

TIME (TIME)

PULSE (PULS)

CHRONOGRAPH (CHRO)

ALARM (ALRM)

BASIC OPERATION OF BUTTONS

HOW TO SET TIME AND CHIME

• Press S3 to show Time mode, mode prompt “TIME” will be displayed for 1 second first.

• Press S2 to toggle between “Month and Day” or “Second” displays.

Display with month and day Display with seconds

• Press and hold S4 for 2 seconds to enter setting mode. The hour digits start flashing.

• Press S1 (forward) or S2 (reverse) to adjust the flashing digits. Press and hold S1 or S2 for fast setting.

• Press S3 to select the next digits or 12/24Hr for setting. The sequence is shown as follow:

1 SECOND

AUTO

• When setting seconds, pressing S1 or S2 while the second digits count between 30 to 59 will reset the second digits to 00 and 1 will be added to the minute

digits.

• Year can be set from 2000 to 2049.

• When setting 12/24Hr, press S1 or S2 to toggle 12-hour or 24-hour display formats. If 24-hour display format is selected, there will be no “PM” flag.

• After all adjustments are completed, press S4 to exit the setting mode and weekday will be adjusted automatically.

• Press S1 to toggle the chime function on or off. If the chime function is “on”, the chime icon will be shown.

1. If the chime function is set to “on”, a “Beep” sound will be given on every full hour and there will be button confirmation sound.

2. If there is no button operation for about 3 minutes in setting mode, the watch will return back to Time mode automatically.

Setting the chime:

• Press S1 to set the chime to on or off. When the chime is on, the chime icon is displayed.

Remarks:

S3 S3 S3

HOUR MINUTE SECOND YEAR

MONTHDAY12/24 h

S3S3

S3 S3

chime “off” chime “on”

CHIME ICON

HOW TO PREPARE FOR HEART RATE MEASUREMENT

Enter data for heart rate monitor

To use the heart rate measuring function, follow these steps:

• Press S3 to show Pulse mode, mode prompt “PULS” will be displayed for 1 second first.

• Press and hold S4 for 2 seconds to enter setting mode. Flashing “on” will be shown at the bottom row of the display.

• Press S1 (forward) or S2 (reverse) to set the data (flashing). Press and hold S1 or S2 for fast setting.

• Press S3 to select the next data for setting. The sequence is shown as follow:

• After all data are entered, press S4 to exit setting mode.

1 SECOND

AUTO

HEART RATE ZONE ON/OFF MALE/FEMALE UNIT (LB/KG) WEIGHT

AGEZONE HIGH LIMIT

ZONE LOW LIMITZONE ALARM ON/OFF S3 S3

S3 S3

Remarks:

1. If both heart rate zone and zone alarm are set to “on”, 1 “Beep” sound will be given every 5 seconds when heart rate is below “Zone Low Limit” and 2

“Beep” sounds will be given every 5 seconds when heart rate is above “Zone High Limit”.

2. If heart rate zone is set to “off”, there will be no zone alarm and “Time in Zone” will not be shown in Chronograph mode.

3. Preset “Zone High Limit” and “Zone Low Limit” are produced after sex and age are entered (or changed), the values are given according to the

following formulae: Male: High Limit = 220-Age Low Limit = (220-Age)x0.7

Female: High Limit = 226-Age Low Limit = (226-Age)x0.7

User can set his own limits after entering sex and age.

4. If unit or weight is changed, the chronograph will be reset, and all data cleared, automatically.

5. Weight can be set from 20 to 299 LB (or KG).

6. Age can set from 1 to 99.

7. Both “Zone High Limit” and “Zone Low Limit” can be set from 40 to 240 BPM (Beat Per Minute).

8. If there is no button operation for about 3 minutes in setting mode, the watch will return back to Pulse mode automatically.

EQUIPPING THE TRANSMITTER (CHEST STRAP)

• Attach the transmitter to the elastic strap provided.

• Moisten the electrode areas on the inside of the transmitter with water as shown in the illustration.

electrode areas

• Attach the strap around your chest below the breast chest muscles (see illustration). Make sure that the side with the battery compartment cover is in

contact with your bare skin and the arched center portion is up.

1. Transmitter electrodes should be moistened to ensure flawless heart rate measurement.

2. It is recommended that you wear the transmitter against your bare skin to ensure flawless operation.

Remarks:

HEART RATE MEASURING AT PULSE MODE

1 SECOND

AUTO

ZONE ALARM ICON

HEART ICON

• Press S3 to show Pulse mode, mode prompt “PULS” will be displayed for 1 second first.

• Heart icon flashes when heart rate signal is received from the transmitter and the heart rate is shown at the middle row of the display.

• If both heart rate zone and zone alarm are set to “on”, 1 “Beep” sound will be given every 5 seconds when heart rate is below “Zone Low Limit” and 2

“Beep” sounds will be given every 5 seconds when heart rate is above “Zone High Limit”. And the displays will be as follow:

1. If no heart rate signal is received for 1 minute, the link between the watch and the transmitter will be cut off automatically, and “- - -” (not flashing) will

be shown at the middle row of the display. To re-link, press S4, and “- - -” will start flashing or heart rate will be shown.

2. Heart rate measurement will not be taken when EL back light is “on” or alarm is sounding.

3. If heart rate zone is set to “off”, there will be no zone alarm or high/low limit indication.

4. If no heart rate signal is received and there is no button operation for about 3 minutes in Pulse mode, the watch will change to Time mode

automatically.

Remarks:

Below “zone low limit” Above “zone high limit”

1 SECOND

AUTO

ZONE ALARM ICON

HEART ICON

HOW TO USE CHRONOGRAPH (WITH HEART RATE MEASUREMENT)

• Press S3 to show Chronograph mode, mode prompt “CHRO” will be displayed for 1 second first.

• Heart icon flashes when heart rate signal is received from the transmitter and the heart rate is shown at the bottom row of the display.

• Press S1 to start the chronograph.

• For the first hour, 1/00-seconds is shown at the top row while minutes and seconds are shown at the middle row of the display.

Then seconds is shown at the top row while hours and minutes are shown at the middle row of the display.

• If both heart rate zone and zone alarm are set to “on”, 1 “Beep” sound will be given every 5 seconds when heart rate is below “Zone Low Limit” and 2 “Beep”

sounds will be given every 5 seconds when heart rate is above “Zone High Limit”.And the displays will be as follow:

• Press S1 again to take split time, flashing “SPL” and taken split time will be shown for 10 seconds, and then display will show current running time of

chronograph.

• Press S2 to stop the chronograph.

Below “zone low limit” Above “zone high limit”

• If heart rate zone is set to “on”, after the chronograph is stopped, then “Elapsed Time”, “Average Heart Rate”, “Time in Zone” and “Calorie Consumption”

will be displayed sequentially, each for 5 seconds. Press S2 can run through the sequence one by one.

• Press S1 to re-start the chronograph or press and hold S4 for 2 seconds (“CLr” displayed) to reset the chronograph (with all data cleared) back to zeros.

1. If no heart rate signal is received for 1 minute, the link between the watch and the transmitter will be cut off automatically, and “- - -” (not flashing) will be

shown at the bottom row of the display. To re-link, press S4, and “- - -” will start flashing or heart rate will be shown.

2. Heart rate measurement will not be taken when EL back light is “on” or alarm is sounding.

3. The chronograph is of 1/00-second resolution for the first hour and 1-second resolution for the rest and with working range up to 24 hours, then the

chronograph stop automatically.

4. If heart rate zone is set to “off”, there will be no zone alarm, high/low limit indication and “Time in Zone” display.

5. “Average Heart Rate” = Sum of heart rate ÷ Number of samples.

Remarks:

or 5 SEC

AUTO

or 5 SEC

AUTO

or 5 SEC

AUTO

or 5 SEC

AUTO

average heart rate time in zone calorie consumptionelapsed time

6. “Time in Zone” is the time (excluding 1/100-seconds) that the heart rate stays within the high/low limit set.

8. If there is no heart rate signal received since entering Chronograph mode, bottom row shows “- - -”, then there will not be any “Average Heart Rate”, “Time

in Zone” or “Calorie Consumption” display.

7. The “Calorie Consumption” (shown in KCAL) depends on weight and heart rate of user, and the time lasted

HOW TO SET ALARM

Setting the chime:

• Press S1 to set the chime to on or off. When the chime is on, the chime icon is displayed.

Remarks:

1. If the chime function is set to “on”, a “Beep” sound will be given on every full hour and there will be button confirmation sound.

2. If there is no button operation for about 3 minutes in setting mode, the watch will return back to Time mode automatically.

chime “off” chime “on”

CHIME ICON

Setting time:

• Press S3 to showAlarm mode, mode prompt “ALRM” will be displayed for 1 second first.

• Press and hold S4 for 2 seconds to enter setting mode. The hour digits start flashing.

• Press S1 (forward) or S2 (reverse) to adjust the flashing digits. Press and hold S1 or S2 for fast setting.

• Press S3 to select the next digits for setting. The sequence is shown as follow:

• After all adjustments are completed, press S4 to exit the setting mode.

1 SECOND

AUTO

MINUTEHOUR

• Press S1 or S2 to toggle the alarm function on or off. If the alarm function is “on”, the alarm icon will be shown.

1. The alarm sounds daily for 20 seconds at alarm time if the alarm function is “on”. Press any button to stop the alarm sound.

2. The alarm function is automatically set to “on” when entering setting mode.

3. If 24-hour display format is selected for Time mode, there will be noAM flag “A” or PM flag “P” for alarm time.

4. If there is no button operation for about 3 minutes in setting mode, the watch will return back to Alarm mode automatically.

• Press and hold S1, S2, S3 and S4 simultaneously for 1 second, all segments will be “off”, then release the buttons and the watch will be reset.

After reset, test patterns will be displayed for a few seconds, and finally the display will be as follow:

Remarks:

How to reset the watch:

Wecker Wecker

ALARMSYMBOL

S1 / S2

Replace the exhausted battery with a cell recommended as follow:

1. Watch CR2032 or equivalent.

We recommend to have the watch battery changed by a watch specialist.

2. Transmitter CR2032 or equivalent.

Open the battery compartment on the reverse side of the chest strap as described on the battery compartment cover. Remove the battery and install a new

battery with the letters on the upper side. Close the battery compartment.

The battery compartment can be found on the underside of the unit. Open the battery compartment, install batteries and then close the battery compartment.

• Keep away from children!

• Do not shorten battery!

• Not rechargeable!

• May explode in fire!

DISPOSAL / BATTERY SAFETY NOTE

Battery safety note:

BATTERY REPLACEMENT

WARRANTY

The was checked for function before shipment.

To obtain service under the terms of this warranty, mail the product to the address below. Make sure to enclose a note describing the difficulty you have with

the monitor and the bill of sale or cash receipt.

All repairs due to defects of workmanship or material will be repaired free within 36 months from the date of purchase (date of the cash receipt/sales bill).

The warranty does not apply if the monitor is used contrary to instructions, handled, stored or cleaned improperly or in any other unusual circumstances.

Any further claims, e.g., claims for damages, are excluded.