Icemoon Hidden Camera Power Bank User manual

User Manual
Hidden Camera Power Bank

Contents
1. OVERVIEW: BUTTONS AND LIGHTS ............... 1
2. CONDITIONS AND PREPARATIONS ................ 2
2.1 I
NSERT
M
ICRO
SD
CARD
...................................... 2
2.2 P
OWER ON
/
OFF THE CAMERA
............................... 2
2.3 B
ATTERY
C
HARGING
............................................ 2
2.4 R
ESET
............................................................... 3
3. PRIMARY FUNCTIONS ................................... 3
3.1 R
ECORD VIDEO
................................................... 3
3.2 V
IEW WHAT YOU RECORDED
.................................. 4
3.3 D
EVICE
C
HARGING
.............................................. 4
4. USE MORE .................................................... 4
4.1 S YNC RECORDING TIME WITH PC ............................ 5
4.2 W
EBCAM
.......................................................... 6
5. SPECIFICATIONS ............................................ 6

1
1. Overview: Buttons and Lights

2
2. Conditions and Preparations
2.1 Insert Micro SD card
Hold golden fingers of the Micro SD Card
towards the specifications, and then insert it
into the slot.
2.2 Power on/off the camera
2.2.1 Power on: Press button B (Power/Infrared
Lights Switch), then blue light keeps on and
camera goes into standby mode. And the
Infrared Lights also turns on. Just press the
button again to turn Infrared Lights off.
2.2.2 Power off: Long press button B
(Power/Infrared Lights Switch) until the blue
light turns off, then the red light will start to
blink for 6s, then disappear and the camera will
also turn off simultaneously.
2.3 Battery Charging
When the battery power is weak and camera is
recording, the file will be saved automatically
when the battery runs out.
To charge, use the USB cable to connect it to

3
your PC or adapter (DC 5V). It takes about 5-6
hours to get a full charge.
Take note that the camera can’t work when you
connect it to your PC. You can charge it by your
adapter when the camera is working.
2.4 Reset
If the camera performs abnormally, use a pin to
press the Reset button in the hole to reset it.
3. Primary Functions
Functions stated below are primary features of
this item which are easy to set up and use.
3.1 Record video
3.1.1 Power on the camera.
3.1.2 To start recording: Press A (Video) button,
the blue light blinks fast for 3 times and then
turns off, which indicates the start of video
recording.
3.1.3 To stop recording: Press A (Video) button
again, the red light blinks fast for 3 times and
the blue light turns on, file will be save