Icemoon Wi-Fi Camera Power Bank User manual

User Manual
Wi-Fi Camera
Power Bank
Power Bank

Contents
1. OVERVIEW: BUTTONS AND LIGHTS ............... 1
2. CONDITIONS AND PREPARATIONS ................ 2
2.1 INSERT MICRO SD CARD ...................................... 2
2.2 POWER ON/OFF THE CAMERA ............................... 2
2.3 BATTERY CHARGING ............................................ 2
2.4 TURN ON/OFF LED LIGHTS ................................... 3
2.5 RESET ............................................................... 3
3. PRIMARY FUNCTIONS ................................... 4
3.1 SCAN THE QR TO DOWNLOAD THE APP ICEMOON ..... 4
3.2 OPEN THE APP, CHOOSE WI-FI CAMERA. ................ 5
3.3 TAP CONNECT CAMERA, AND CONNECT THE CAMERA TO
HOTSPOT (UID). ...................................................... 6
3.4 PLEASE CHOOSE THE WAY OF CONNECTING. .............. 7
3.5 DEVICE LIST ..................................................... 11
3.6 DEVICE SETTINGS .............................................. 12
3.7 LIVE VIDEO ...................................................... 18
4. SPECIFICATIONS .......................................... 19

1
1. Overview: Buttons and Lights

2
2. Conditions and Preparations
2.1 Insert Micro SD card
Hold golden fingers of the Micro SD Card
towards the specifications, and then insert it
into the slot.
2.2 Power on/off the camera
2.2.1 Power on: Press button B (Power Button)
for 2s, the red and yellow lights
alternately flash, it will create a hotspot
(named the camera’s UID pasted on the
camera).
2.2.2 Power off: Long press button B (Power
Button) until both light turn off.
2.3 Battery Charging
When the battery power is weak and camera is
recording, the file will be saved automatically
when the battery runs out.
To charge, use the USB cable to connect it to
your PC or adapter (DC 5V). It takes about 3-4
hours to get a full charge.

3
2.4 Turn on/off LED lights
After it power on for 10s, you can press LED
Switch button to turn on the LED lights. Press it
again to turn it off.
2.5 Reset
If the camera performs abnormally, use a pin
to press and hold the Reset button in the hole
for 5s to reset it.

4
3. Primary Functions
Download the App icemoon
, go step by step to
set it up.
Please notice: 1. It only supports 2.4G Wi
network. 2. The default
password of the
camera is 8888.
3.1 Scan the QR to download the App
icemoon
You can also download the App icemoon
from
Google Play Store (for Android) or Apple Store
(for iOS).
, go step by step to
Please notice: 1. It only supports 2.4G Wi
-Fi
password of the
3.1 Scan the QR to download the App
from
Google Play Store (for Android) or Apple Store

5
3.2 Open the App, choose Wi-Fi Camera.

6
3.3 Tap Connect Camera, and connect the
camera to hotspot (UID).
3.3 Tap Connect Camera, and connect the

7
3.4 Please choose the way of connecting.
Way1 Connect device to wireless router
In this way, you can view real-
time video
anywhere.
3.4 Please choose the way of connecting.
time video

8
 Choose your Wi-
Fi, enter its password and
then join.
Fi, enter its password and

9
 Tap the icon to enter Device List.
Way2 Connect directly by Point-to-Point
Your smartphone can connect directly by
Point-to-Point (hotspot) when your
smartphone is near.
In this way, it can’t support viewing real-time
video remotely.
Tap the icon right to enter Device List.

10
If you want to connect your camera to Wi
-
please go to Device list> Settings>Device
Settings>Wi-Fi Settings.
-
Fi,
please go to Device list> Settings>Device

11
3.5 Device list
Tap it to add a new device
Tap it to add as many as 4 cameras in a
interface
Motion detection is enabled
Motion detection is disabled
Tap it to enter Settings

12
Tap it to view real-time video
Tap it to view snapshots captured in the
real-time video interface
Tap it to view videos recorded in the
real-time video interface or
Micro SD card
Tap it to view photos taken when it is
alarming
3.6 Device Settings
Tap to enter Settings>Device Settings.
3.6.1 Alarm Settings

Motion detection sensitivity: When
motion detection is enabled, the device
will send you an alarm automatically if
motion is detected. You can choose a
sensitivity level for Motion detection.
has 7 levels. When you choose “
disabled
motion detection will be closed.
 Alarm schedule: You can set a time
period
only in which it sends alarm information to
Tap it to view snapshots captured in the
Micro SD card
Motion detection sensitivity: When
motion detection is enabled, the device
will send you an alarm automatically if
motion is detected. You can choose a
sensitivity level for Motion detection.
It
disabled
”,
period
only in which it sends alarm information to

13
you.

Warming Tone: After enabling motion
detection (Motion detection sensitivity is
not set to “disabled”
), you can enable the
camera to send out alarm sound or not.
T
his function applies to certain types. For
some types, if smoke/gas detection is
available
, the alarm also can be triggered.
Warming Tone: After enabling motion
detection (Motion detection sensitivity is
), you can enable the
camera to send out alarm sound or not.
his function applies to certain types. For
some types, if smoke/gas detection is
, the alarm also can be triggered.

14
When it sounds an alarm, you can tap the
icon to stop it.
 E-mail Alert: After enabling motion
detection, you can enable or close the
E-mail alarm. Just go to “Email Settings” to
set it, then it will send you photos shot at
the moment it detects the moving object.
For some types, if smoke/gas detection is
available, the alarm also can be triggered.
 Alarm interval: After enabling motion
detection, if motion is detected, the
camera will perform alarm. You can type in
an Arabic number between 30 with 300 to
set the time interval between two alarms.
 Push notifications: You can enable or
disable this functionality. If you enable it,
it will send you alarm information even if
exit the App in iOS-powered devices, or
run the App in background in
Android-powered devices.
 On-Screen Display: If you enable this

15
functionality, it will display current time in
the app.
 Certain types with smoke/ gas detection
functionality have a more item to enable
or disable smoke/ gas detection alarm.
After setting, please tap “OK” to save it.
3.6.2 SD Card Record Settings
 Record: If you want to record all the time,

16
please choose “All day”. If you choose
“On alarm”, you need to enable motion
detection. You can also choose “Timing
Record” to set a time only in which it
records videos into Micro SD card.
 Resolution: You can choose the resolution
of video recorded in the Micro SD card
(not live video).
 File length (minute): It creates a file every
3 minutes by default (that means it will
automatically generate a video file every 3
minutes and continue recording). You can
type in a number to set file length
between 1 with 60 minutes.
 Record sound: When you enable this
functionality, it will record sound while
recording video.
 Loop recording: When you enable this
functionality, it will override the oldest file
and continue recording even if the Micro
SD card is full.

17
After setting, please tap “OK” to save it.
3.6.3 Email Settings
Type in E-mail addresses for a sender and as
many as 4 recipients. And fill in “User” and
“Password” blanks with the sender’s E-mail
addresses and corresponding password,
respectively. Then tap “OK” to save it.

18
3.7 Live Video
Tap the screen to unhide the icons.
Adjust the brightness of the live video
Adjust the contrast of the live video
Enable or disable IR lights(for some types)
Adjust the quality of the live video
Enable or disable speaker
Snapshot
Record video into your smartphone
Rotate video image left and right
Rotate video image up and down
Hold it to send voice (Only applies to types
Enable or disable IR lights(for some types)
Hold it to send voice (Only applies to types