Icop VDX-6324RD User manual

Full 16-bit ISA Bus
VDX-6324RD
DM&P Vortex86DX 800MHz
Half-Size CPU Module
with 4S/4USB/VGA/LCD/LAN/GPIO/PWMx16
256MB DDR2 Onboard
User’s Manual
(Revision 1.2A)

Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document. And makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc..
Copyright 2008 ICOPTechnology Inc.
Manual No. IUM6324000-01 Ver.1.0A February , 2009
Manual No. IUM6324000-01 Ver.1.1A July , 2010
Manual No. IUM6324000-01 Ver.1.2A July , 2018
Trademarks Acknowledgment
Vortex86DXis the registered trademark of ICOP Technology Inc.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.

T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s.............................................................iii
C h a p te r 1 Introduction……………………………………………1
1.1 Packing List............................................................1
1.2 Product Description................................................2
1.3 Specifications.........................................................3
1.4 Board Dimension....................................................5
C h a p te r 2 Installation……………………………………………..6
2.1 Board Outline.........................................................6
2.2 Connectors & Jumpers Location............................7
2.3 Connectors & Jumpers Summary...........................9
2.4 PinAssignments & Jumper Settings......................11
2.5 System Mapping...................................................22
2.6Watchdog Timer...................................................25
2.7GPIO....................................................................26
2.8SPI flash...............................................................27
2.9PWM....................................................................28
3.0 IDE to SD.............................................................29
C h a p te r 3 Driver Installation……………………………………30
Appendix ………………………………………………………………..31
A. TFT Flat Panel Data Output......................................31
B. TFT Flat Panel Support List.......................................32
C. LVDS Flat Panel SupportList....................................34
D. Flat Panel Hardware Setting.....................................35
E. Flat Panel Wiring and Lighting..................................36
F. TCP/IP library for DOS real mode..............................37
G. BIOS Default Setting.................................................38
Warranty............................................................................................39

Vortex86DX-6324RD Vortex86DXHalf-Size CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
VDX-6324RD
Embedded Vortex86DX CPU All-in-One Board
Manual & Drivers CD x 1
RS232 cable x 3
PRINT cable x1
IDE cable x 1
USB cable x 2 (USB port x 2)
GPIO cable x 1

Vortex86DX-6324RD Vortex86DXHalf-Size CPU Module
2
1.2 Product Description
The VDX-6324RD family of low-power x86 embedded controller is designed to meet Half-Size
specification with full 16-bit ISA Bus, and integrated with the following features.
800MHz Vortex86DX System-On-Chip
VGA, TFT/LVDS LCD support up to
1280x1024 resolution
256 / 512MB DDR2 system memory
Enhanced IDE (UltraDMA-100/66/33)
10/100Mbps Ethernet
4 USB 2.0 (host)
Up to 4 serial ports
Parallel port
16-bit GPIOs
Onboard 4MB SPI Flash
PC/104-Plus expansion bus
Meet PC/104 stacking spec.
2 watchdog timer
16~24 PWM channels
JTAG interface
AMI BIOS
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70
The VDX-6324RD Half-Size family of embedded controller is designed with backward
compatibility in mind, to provide migration path for projects facing end-of-life challenges with their
existing x86 based Half-Size controller. The VDX-6324RD family of controller is designed as a
plug in replacement, with backward compatibility to support legacy software to help extend
existing product life cycle without heavy re-engineering.
VDX-6324RD is suitable for broad range of data-acquisition, Industrial automation, Process
control,Automotive controller,AVL, Intelligent Vehicle management devic,Medical device,
Human machine interface, Robotics, machinery controlAnd more…application that required
small footprint, low-power and low-cost hardware with open industry standard such as Half-Size.

Vortex86DX-6324RD Vortex86DXHalf-Size CPU Module
3
1.3 Specifications
Features
VDX-6324RD
CPU
DM&P SoC CPU Vortex86DX- 800MHz
Real Time Clock with Lithium Battery Backup
Cache
L1:16K I-Cache, 16K D-Cache, L2 Cache 128KB
BIOS
AMI BIOS
Bus Interface
PC/104 Standard Compliant (Optional: PCI-104)
System Memory
256 /512MB DDR2 onboard
Watchdog Timer
Software programmable from 30.5 us to 512 seconds x2
sets(Watchdog 1 fully compatible with M6117D)
VGA
XGI Volari Z9s Chipset
VGA and TFT Flat Panel Interface Support
LVDS Flat Panel Interface Support (Optional)
Onboard 32MB VGA Memory
Support resolution up to 1280 x 1024
LAN
Integrated 10/100M Ethernet
Audio
CM119 USB Audio Controller (Optional)
I /O Interface
Enhanced IDE port (UltraDMA-100/66/33) x1
RS-232 port x3
RS-232/422/485 port x1 (RS485 Auto Direction)
Parallel port x1
USB port (2.0) x4
16-bit GPIO port x1
10/100Mbps Ethernet port x1

Vortex86DX-6324RD Vortex86DXHalf-Size CPU Module
4
Connectors
2.54mm ∅26-pin box header for Print x1
2.54mm ∅10-pin box header for RS-232 x3
2.54mm ∅10-pin box header for USB x2
2.54mm ∅20-pin box header for 16-bit GPIO x1
2.54mm ∅3-pin header for RS-485 x1
2.54mm ∅2-pin header for Reset x1
2.54mm 4-pin header for DC-in x1
2.0mm ∅44-pin box header for IDE x1
2.0mm ∅44-pin box header for LCD x1
1.25mm ∅6-pin Wafer for JTAG x1
External RJ-45 connector for Ethernet x1
External Mini DIN connector for KBD/Mouse x1
External D-Sub 15 pin female connector for VGA x1
External D-Sub 9 pin male connector for RS232 x1
Type I/II Compact Flash Slot x1
4-pin Male Power Connector x1
Flash Disk Support
On board 4MB SPI Flash Disk (Driver: A)
44-pin IDE Flash Disk( EmbedDisk 16MB or above)
Compact Flash Type I/II
44-pin IDE to Micro SD (Optional)
PWM
16~24 Channels
SRAM support
512KB (Optional)
Power Requirement
Single Voltage +5V @760mA
Dimension
184mm X 122mm (7.24 x4.80 inches)
Weight
180g
Operating
Temperature
-20oC ~ +70oC
-40°C ~ +85°C (Optional)

Vortex86DX-6324RD Vortex86DXHalf-Size CPU Module
5
1.4 Board Dimension

Vortex86DX-6324RD Vortex86DXHalf-Size CPU Module
6
C h a p t e r 2
Installation
2.1 Board Outline
(Note1: COM2 RS232/422/485 is selected by BIOS setting)
(Note2: PCI-104 connector is optional: VI/O setting: +5V only)

Vortex86DX-6324RD Vortex86DXHalf-Size CPU Module
7
2.2 Connectors & Jumpers Location
Connectors