ICP CON ET-7200 User manual
QuickStartforET‐7200/PET‐7200
January 2014, Version 1.0.0
Congratulations!
This Quick Start will provide information needed to get started with ET-7200/PET-7200.
Please also consult the User Manual for detailed information on the setup and use of
ET-7200/PET-7200.
PET-7200/ET-7200 Quick Start
What’s In the Box?
In addition to this guide, the package includes the following items:
ET-7200/PET-7200 Module Software Utility CD
Technical Support
ET-7200/PET-7200 User Manual
CD:\NAPDOS\NAPDOS\ET7200\Document\
http://ftp.icpdas.com/pub/cd/6000cd/napdos/et7200/document/
ET-7200/PET-7200 Website
http://www.icpdas.com/products/Remote_IO/et-7000/et-7000_introduction.htm
ICP DAS Website
http://www.icpdas.com/
1
1 ---------------------------------------------------------
Configuring Boot Mode
Init Mode: After booting, ET-7200/PET-7200 will not run the default
firmware and cannot surf the internet. Use this mode to update MiniOS7
image.
Normal Mode: After booting, ET-7200/PET-7200 will run the default
firmware and can use all ET-7200 functions.
PET-7200/ET tart
2 ----------------------------------------------------------------------------------
Connecting to Network, PC and Power
The ET-7200/PET-7200 is equipped with an RJ-45 Ethernet port for connection to
an Ethernet hub/switch and PC
-7200 Quick S
Non-PoE
PoE
2
3 ---------------------------------------------------------------------------------
Installing the MiniOS7 Utility
Step 1：Get the MiniOS7 Utility tool
The MiniOS7 Utility can be obtained from companion CD or our FTP site:
CD:\Napdos\minios7\utility\minios7_utility\
http://ftp.icpdas.com/pub/cd/6000cd/napdos/software/minios7_utility/
PET-7200/ET-7200 Quick Start
Step 2：Follow the prompts to complete the installation
After the installation has been completed,
there will be a new shortcut for MiniOS7 Utility
on the desktop.
4 ----------------------------------------------------------------------------------
Using MiniOS7 Utility to Assign a New IP
The ET-7200/PET-7200 are Ethernet devices, which comes with a default IP address,
therefore, you must first assign a new IP address to the ET-7200/PET-7200
Item Default
IP Address 192.168.255.1
Subnet mask 255.255.0.0
Gateway 192.168.0.1
3
Step 1：Run the MiniOS7 Utility
Double-click the MiniOS7 Utility
shortcut on your desktop.
PET-7200/ET-7200 Quick Start
Step 2：Press“F12”or choose“Search”from the“Connection”menu
After pressing F12 or choosing Search from Connection menu, the MiniOS7 Scan
dialog will appear, that will display a list of all MiniOS7 modules on your network.
See the status tip, waiting
for the search to be done.
4
Step 3：Choose the module name and then choose“IP setting”from the toolbar
Step 4：Assign a new IP address and then choose “Set” button
PET-7200/ET-7200 Quick Start
5
Step 5：Choose “Yes” button
Press the Yes button in the Confirm dialog box
to exit the procedure.
5 ----------------------------------------------------------------------------------
Enabling Adobe Flash Player in Your Browser
Your browser must support Adobe Flash Player and have it enabled in order to use the
ET-7200/PET-7200 web site.
If you do not have it installed, please go to the following website and install it.
The Adobe Flash Player Download Center：
http://get.adobe.com/flashplayer/
PET-7200/ET-7200 Quick Start
6 ----------------------------------------------------------------------------------
Go to the ET-7200/PET-7200 Web Site to Check out
Functions
The ET-7200/PET-7200 contains an advanced web configuration system that provides
users with access ET-7200/PET-7200 applications through a standard web browser.
Step 1：Start ET-7200/PET-7200
Make sure the switch placed in the “Normal” position.
Then reboot ET-7200/PET-7200.
Step 2：Open a browser
Please use a standard internet browser to view the ET-7200/PET-7200 webpage, such
as Mozilla Firefox or Internet Explorer…etc.
6
Step 3：Type the URL address of ET-7200/PET-7200
If you haven’t changed the default IP address of the ET-7200/PET-7200, please refer to
“4. Using MiniOS7 Utility to Assign a New IP” to configure it.
Step 4：Fill out the User name and Password
After entering the IP address, the login
dialog box will appear and prompt you to
enter your User name and Password.
PET-7200/ET-7200 Quick Start
The factory default User name and
Password are as follows:
Item Default
User name Admin
7
Password
Step 5：Welcome to ET-7200/PET-7200 web site
After logging into the
PET-7000/ET-7200 web site,
the welcome page will appear.
Admin
Step 6：Check out the data acquisition services
Under the Main Menu, expand the Web HMI, and then
select the Web HMI option to check the values of the
data acquisition.
PET-7200/ET-7200 Quick Start
8
This manual suits for next models
1
Table of contents
Other ICP CON Control Unit manuals
