ICP DAS USA RTU-140 User manual

RTU-140 Quick Start v1.00 2019/05/08
1
RTU-140
Quick Start
What’s In the Box! ············································
In addition to this guide, the package includes the following items:

RTU-140 Quick Start v1.00 2019/05/08
2
Appearance and Pin Assignments
COM Port and Power Input
Pin
Description
Power Input：
+10VDC ~
+30VDC
Black
P.GND
Red
PWR
COM
RS-485
Green
D-
White
D+
Utility Port
Red frame
Micro USB

RTU-140 Quick Start v1.00 2019/05/08
3
LED indicators
LED
LED Status
LED Description
PWR
Hengliang
Power supply
Flashes every 0.5
seconds
Battery charging
4G
Hengliang
4G network search
Flashes every 0.2
seconds
Data transfer / 4G network
registration completed
Flashes once
every 0.8 seconds
3G network registration
completed
Not bright
Power off or sleep state
STA
Flashes every
0.05 seconds
Pin code error
Flashes every
0.25 seconds
Modem communication
Flashes every 0.5
seconds
Modem idle
GPS
Flash once per
second
GPS successfully
positioned
Hengliang
GPS is not yet positioned
Installing the RTU Utiliy
It needs the runtime environment with .NET Framework 2.0 or
above to execute the RTU Utility in the PC.
Step 1: Get the RTU Utility tool

RTU-140 Quick Start v1.00 2019/05/08
4
Step 2: Follow the prompts to complete the installation
How to use RTU Utility
Operation
Before RTU-140 Series Utility is connected to the PC correctly,
please confirm these following steps:
1. The STA LED is blanking. There are 2 kinds of blanking in
RTU-140.
STA LED
Description
Blanking per 0.25 sec
Modem communication
Blanking per 0.05 sec
The pin code is wrong. The users
need to set PIN/PUK code in the
RTU-140 Series Utility.
Blanking per 0.5 sec
Modem idle
2. Confirm the Micro USB connection between RTU-140 and PC
is correct. Users can refer to the following figure.
3. During the setting procedure, the external power must be turn
on.
Note: If the STA LED is always on, please reset
RTU-140.

RTU-140 Quick Start v1.00 2019/05/08
5
1. Tool Menu
COM：
Select PC-side COM PORT connected to RTU-140
Login/Logout：
Before you can do anything with the RTU-140, you must log in.
After the login is successful, the option will become Logout, and
the options in the Utility will allow the operation. If the SMS
machine has been reopened or turned off, you must log in again.
Language:
RTU-140 Utility interface text selection, currently only supports
English
Version：

RTU-140 Quick Start v1.00 2019/05/08
6
RTU-140 Firmware and Utility version information
System：
Recover to Factory Settings, Restart RTU-140 (Reset RTU-140)
and Debug three functions
2. Function Item
Main Parameter：
RTU-140 related settings.
Device Status:
Check SD Card, GPRS and GPS status.
Device Time：
Query and set the RTU-140 device time.
Signal Quality：
Query the signal strength of the current device.
3. Status Bar
Display information about the operation of the RTU-140 Utility,
from left to right, in order
(1) PC-side COM Port number used by the Utility.
(2) Transmission parameter setting of COM Port.
(3) The current connection status of the COM Port.
(4) The result of each operation, such as the success of the
“storage” action.
Technical Support
1. ICP DAS Service : ser[email protected]
2. RTU software Website:
http://m2m.icpdas.com/RTU-140.html