EnglishDeutsch
 logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. ICP DAS USA
  6. •
  7. I/O System
  8. •
  9. ICP DAS USA CAN-2018C User manual

ICP DAS USA CAN-2018C User manual

Other ICP DAS USA I/O System manuals

ICP DAS USA I-7019R User manual

ICP DAS USA

ICP DAS USA I-7019R User manual

ICP DAS USA tET-PD6 User manual

ICP DAS USA

ICP DAS USA tET-PD6 User manual

ICP DAS USA DN-8K32R User manual

ICP DAS USA

ICP DAS USA DN-8K32R User manual

ICP DAS USA DB-16R User manual

ICP DAS USA

ICP DAS USA DB-16R User manual

ICP DAS USA PROFI-8455 Setup guide

ICP DAS USA

ICP DAS USA PROFI-8455 Setup guide

ICP DAS USA I-7017(F)C User manual

ICP DAS USA

ICP DAS USA I-7017(F)C User manual

ICP DAS USA WF-2000 Series User manual

ICP DAS USA

ICP DAS USA WF-2000 Series User manual

ICP DAS USA I-7061 User manual

ICP DAS USA

ICP DAS USA I-7061 User manual

ICP DAS USA UA-7200 Series User manual

ICP DAS USA

ICP DAS USA UA-7200 Series User manual

ICP DAS USA EC2-DIO Series User manual

ICP DAS USA

ICP DAS USA EC2-DIO Series User manual

ICP DAS USA P8R8-DIO User manual

ICP DAS USA

ICP DAS USA P8R8-DIO User manual

ICP DAS USA A-626 User manual

ICP DAS USA

ICP DAS USA A-626 User manual

ICP DAS USA CAN-2054C User manual

ICP DAS USA

ICP DAS USA CAN-2054C User manual

ICP DAS USA 7188X User manual

ICP DAS USA

ICP DAS USA 7188X User manual

ICP DAS USA I-7088 User manual

ICP DAS USA

ICP DAS USA I-7088 User manual

ICP DAS USA M-7000 series User manual

ICP DAS USA

ICP DAS USA M-7000 series User manual

ICP DAS USA I-7018Z Series User manual

ICP DAS USA

ICP DAS USA I-7018Z Series User manual

ICP DAS USA tM-P8 User manual

ICP DAS USA

ICP DAS USA tM-P8 User manual

ICP DAS USA M-7059 Installation guide

ICP DAS USA

ICP DAS USA M-7059 Installation guide

ICP DAS USA ET-8KP4-MTCP User manual

ICP DAS USA

ICP DAS USA ET-8KP4-MTCP User manual

ICP DAS USA ECAT-2016 Series User manual

ICP DAS USA

ICP DAS USA ECAT-2016 Series User manual

ICP DAS USA ECAT-2511-A User manual

ICP DAS USA

ICP DAS USA ECAT-2511-A User manual

ICP DAS USA PCI-D64HU User manual

ICP DAS USA

ICP DAS USA PCI-D64HU User manual

ICP DAS USA I-7043D User manual

ICP DAS USA

ICP DAS USA I-7043D User manual

Popular I/O System manuals by other brands

WAGO 750-344 manual

WAGO

WAGO 750-344 manual

Teknim TWM-1887 Installation & user manual

Teknim

Teknim TWM-1887 Installation & user manual

Intelligent Appliance IA-2662-E user manual

Intelligent Appliance

Intelligent Appliance IA-2662-E user manual

BERGHOF ECC DIO 16/16 User handbook

BERGHOF

BERGHOF ECC DIO 16/16 User handbook

Advantech PCM-27J3AU Startup manual

Advantech

Advantech PCM-27J3AU Startup manual

Festo CP-E08-M12-CL manual

Festo

Festo CP-E08-M12-CL manual

Measurement Computing PCI-DAS64/M1/16 user guide

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 user guide

Hitachi HX-RIO3 Series user manual

Hitachi

Hitachi HX-RIO3 Series user manual

NUUO SCB-A08 user manual

NUUO

NUUO SCB-A08 user manual

M-system R3Y-RS8 instruction manual

M-system

M-system R3Y-RS8 instruction manual

jablotron JB-110N user manual

jablotron

jablotron JB-110N user manual

Omron SYSMAC C200H Operation guide

Omron

Omron SYSMAC C200H Operation guide

DOLD SAFEMASTER M Safety Technique

DOLD

DOLD SAFEMASTER M Safety Technique

ABB OPT-MF-001 user manual

ABB

ABB OPT-MF-001 user manual

Omron SYSMAC C2000H Operation guide

Omron

Omron SYSMAC C2000H Operation guide

Helmholz TB20 manual

Helmholz

Helmholz TB20 manual

Automationdirect.com DL305 manual

Automationdirect.com

Automationdirect.com DL305 manual

WAGO I/O SYSTEM 750 750-833 manual

WAGO

WAGO I/O SYSTEM 750 750-833 manual

https://manuals.online logo
https://manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2026 Manuals.Online. All Rights Reserved.

CAN-2018C Quick Start Ver. 1.1, Feb/2014
1
CAN-2018C Quick Start
Hardware Specification
CAN Interface
CANopen Specification
CiA DS-301 v4.02, DS-401 v2.1
No. of PDOs
10 Rx, 10 Tx (Support dynamic PDO)
PDO Mode
Event-triggered, Remotely-requested, Cyclic and acyclic SYNC
Node ID
1~99 selected by rotary switch
Baud Rate (bps)
10k, 20k, 50, 125k, 250k, 500k, 800k and 1M
Error Control
Node Guarding protocol and Heartbeat Producer protocol
Terminator Resistor
Switch for 120 Ω terminator resistor
Connector
5-pin screwed terminal block
(CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
Analog Input
Channels
8
Input Type
+/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V
+/-20mA (Requires Optional External 125 Ohms Resistor)
Thermocouple (J, K, T, E, R, S, B, N, C)
Resolution
16-bit
ESD Protection
+/-4 kV, Contact for each channel
LED
Status LED
PWR LED, RUN LED, ERR LED
Power
Input range
Unregulated +10 ~ +30 VDC
Power Consumption
1.5 W
Environment
Operating Temp.
-25 ~ 75 ℃
Storage Temp.
-30 ~ 80 ℃
Humidity
10 ~ 90% RH, non-condensing
For more information about CAN-2018C, please visit the following website:
http://www.icpdas.com/products/Remote_IO/can_bus/can-2018c.htm
CAN-2018C Quick Start Ver. 1.1, Feb/2014
2
CAN-2018C Pin Assignments
CAN-2018C Quick Start Ver. 1.1, Feb/2014
3
CAN-2018C Internal I/O Structure
CAN-2018C Quick Start Ver. 1.1, Feb/2014
4
CAN-2018C Wiring Connection Type
Note: When connecting to a current source, an optional external 125-Ohm precision
resistor is required.
CAN-2018C Quick Start Ver. 1.1, Feb/2014
5
CAN-2018C CAN Bus Wire Connection
*CAN_SHID (FG) is Optional.
2-Wire Connection
Pin
Signal
Description
5
CAN_V+
Power positive
4
CAN_H
Signal high of CAN Bus
line
3
CAN_SHLD
Cable Shield (FG)
2
CAN_L
Signal low of CAN Bus
line
1
CAN_GND
CAN ground
CAN-2018C Quick Start Ver. 1.1, Feb/2014
6
3-Wire Connection
4-Wire Connection (The CAN-2000 is powered by the master device)
CAN-2018C Quick Start Ver. 1.1, Feb/2014
7
CAN-2018C Firmware Update
Step 1 –Set Module to “Bootloader” mode (set Node ID to 00). Then power on the
module.
Step 2 –Run FW_Update_CAN Utility
(FW_Update_CAN Utility)
CAN-2018C Quick Start Ver. 1.1, Feb/2014
8
[1] CAN Device :
The below ICP DAS CAN products are supported by FW_Update_CAN utility
for firmware update.
(1) RS232 to CAN : I-7530
(2) Ethernet to CAN : I-7540D
(3) USB to CAN : I-7565, I-7565-H1, I-7565-H2
(4) CAN Card : PISO-CM100(U),
PISO-/PCM-/PEX-CAN200 / CAN400
Before firmware update, users need to set the below parameters.
(1) Select CAN hardware interface
(2) set Dev_Port or Board_ID
(3) set CAN_Port” number
[2] Download Firmware :
(1) Click “Browser…” button to choose firmware file, can_2018c_xx.fw.
(2) Click “Start Firmware Update” button to start firmware update and it will
show the total percentage of firmware update in progress bar. After the
firmware update finished, it will show the “Firmware Update Success !!”
message.
CAN-2018C firmware Download:
ftp://ftp.icpdas.com/pub/cd/fieldbus_cd/canopen/slave/can-2000c/can-2018c/
FW_Update_CAN Utility Download:
ftp://ftp.icpdas.com/pub/cd/fieldbus_cd/canopen/slave/can-2000c/tools/