ICRealtime PTZ2300SIR User manual

IR Analog Intelligent Speed Dome
User’s Manual
Version 1.0.0

i
Table of Contents
1FEATURES AND FUNCTIONS ..........................................................................................1
1.1General Introduction...................................................................................................................................................1
1.2Features.......................................................................................................................................................................1
1.2.1On-Screen Menu....................................................................................................................................................1
1.2.2Proportional Pan and Tilt ......................................................................................................................................1
1.2.3On-screen Tips.......................................................................................................................................................1
1.2.4Preset Setup and Call ...........................................................................................................................................1
1.2.5Auto Scan................................................................................................................................................................1
1.2.6Auto Tour ................................................................................................................................................................1
1.2.7Auto Pattern............................................................................................................................................................1
1.2.8Privacy Masking .....................................................................................................................................................2
1.2.9Action on Alarm......................................................................................................................................................2
1.2.10Auto Flip .............................................................................................................................................................2
1.2.11Self-diagnosis ....................................................................................................................................................2
1.2.12Day/Night Mode (B/W & Color Mode)............................................................................................................2
1.2.13Auto Focus .........................................................................................................................................................2
1.2.14Backlight Compensation ..................................................................................................................................2
1.2.15Pan Tilt and Zoom.............................................................................................................................................2
1.2.163D Intelligent Location......................................................................................................................................2
1.2.17Idle Status ..........................................................................................................................................................2
1.2.18Power up ............................................................................................................................................................2
1.2.19Image Stabilization/Flip ....................................................................................................................................2
2PROTOCOL, BAUD RATE, ADDRESS SETUP .................................................................3
2.1Protocol and Baud Rate Setup .................................................................................................................................3
2.2Set address dial switch ..............................................................................................................................................4
3MENU .................................................................................................................................5
3.1Screen Menu Index ..................................................................................................................................................5
3.2Self-diagnosis System Information ..........................................................................................................................6

ii
3.3Main Menu ...................................................................................................................................................................6
3.4Menu Operation ........................................................................................................................................................7
3.4.1System Information................................................................................................................................................7
3.4.2Display Setting .......................................................................................................................................................8
3.4.3Camera Setting ......................................................................................................................................................9
3.4.4Function Setting ...................................................................................................................................................12
3.4.5Alarm Setup ..........................................................................................................................................................20
3.4.6IR Light Setting.....................................................................................................................................................21
3.5Dome Abnormal Phenomenon Operation........................................................................................................21
3.5.1Restore to Factory Default Setup ......................................................................................................................21
3.5.2PTZ Movement is not smooth ............................................................................................................................21
4CABLE CONNECTION .....................................................................................................22
4.1System Layout ........................................................................................................................................................22
4.1.1System Connection .............................................................................................................................................22
4.1.2Alarm Connection ................................................................................................................................................23
4.1.3Keyboard Connection..........................................................................................................................................24
5FAQ...................................................................................................................................25
5.1Daily Maintenance..................................................................................................................................................25
5.2Problems and Solutions.......................................................................................................................................25
6APPENDIX Ⅰ LIGHTENING PROTECTION AND SURGE PROTECTION ........................26
7APPENDIX 2 TOXIC OR HAZARDOUS MATERIALS OR ELEMENTS ...........................27

iii
Welcome
Thank you for purchasing our product!
This user’s manual is designed to be a reference tool for the operation of your system.
Here you can find information about this speed dome features and functions, as well as a detailed menu tree.
Please keep it well for future reference!
Before installation and operation, please read the following safeguards and warnings carefully!

iv
Important Safeguards and Warnings
1．Electrical safety
zAll installation and operation here should conform to your local electrical safety codes.
zThe power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC or 24V AC in the IEC60950-1.
zWe assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
zWe are not liable for any problems caused by unauthorized modification or attempted repair.
2．Transportation Security
zNo heavy stress, violent vibration or water splash are allowed during transportation, storage and
installation.
zPlease use the original packing material (or the material of the same quality) when you ship it back to
the manufacturer.
3．Installation
zDo not apply power to the product before completing installation.
zPlease install the proper power cut-off device during the installation connection.
zDo not put object on the product.
4．Environment
zThis series product should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
zPlease keep it away from the electromagnetic radiation object and environment.
zPlease keep the sound ventilation.
zDo not allow the water and other liquid falling into the device.
zPlease make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
zThunder-proof device is recommended to be adopted to better prevent thunder.
zThe grounding holes of the product are recommended to be grounded to further enhance the reliability
of the camera.
5. Daily Maintenance
zCurrent series product has no power button. Please unplug all corresponding power cables before your
begin installation or daily maintenance work.
zPlease keep the dustproof cap back to protect the CCD or CMOS part if the device does not work for a
long time.
zDo not touch CCD (CMOS) component. You can use the blower to clean the dust on the surface of the
device. You can use the dry cloth with some alcohol or mild detergent to clear if necessary.
zDo not use the volatility solvent such as the benzene or thinner, or detergent with strong abradibility. It
may result in lens damage or it may adversely affect the device performance.

v
zIf there is too much dust, please use the water to dilute the mild detergent first and then use it to clean
the device. Finally use the dry cloth to clean the device.
z6. About Accessories
Always use all the accessories recommended by manufacturer.
Before installation, please open the package and check that all the components are included in the package:
Contact you local retailer ASAP if something is missing in your package.

1
1Features and Functions
1.1 General Introduction
The series IR analog intelligent speed dome is a product of general high level of integration and
intelligence. This is a digital and intelligent product of vivid video. It can automatically enable IR light
function under the low illumination environments and near/far IR light intelligent control function. The
installation is convenient.
Comparing with the traditional products, this series IR analog intelligent speed dome has some new
features. It supports 120M IR night vision. It supports various languages, real-time clock function and
protocol auto recognition. It supports 360° continuously pan, 100°tilt and 180° auto flip. It can realize no
blind spot monitor.
This series product can be widely used in remote monitor environment such as electric power, customs,
and water conservancy.
1.2 Features
This series speed dome has the following features:
1.2.1On-Screen Menu
This series product menu supports multiple languages.
It is easy for you to view dome information and configure dome, camera parameters.
1.2.2Proportional Pan and Tilt
This function keeps the image from moving too fast when there is a large amount of zoom.
This series speed dome continually decreases or increases pan and tilt speeds in proportion to depth of
zoom. When zooms speed is increasing, the camera moving speed becomes slow. When zooms speed
is decreasing, the camera moving speed becomes fast.
1.2.3On-screen Tips
Via menu, here you can view:
zCall preset and preset ID, speed dome title when calling touring.
zDome system temperature. (Optional. You can disable this function)
zSoftware version. (Optional. You can disable this function)
zDome address. (Optional. You can disable this function)
1.2.4Preset Setup and Call
Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so
that you can quickly adjust the dome and PTZ to the correct position.
1.2.5Auto Scan
Camera scans back and forth regularly in a horizontal field. Here you need to set left and right limit and
scan speed.
1.2.6Auto Tour
Add presets into a routine in a desired order and then set time and stop duration for each address. The
dome will begin an auto touring between these presets.
1.2.7Auto Pattern
Memorize dome operation such as pan, tilt, and zoom to repeat. You can call it to repeat the previous
operation.

2
1.2.8Privacy Masking
Privacy masking is a user-defined, four-sided area that can not be viewed by you. The masking area will
move with pan and tilt functions and automatically adjust in size as the lens zooms.
1.2.9 Action on Alarm
There are 7 alarm inputs (NO/NC) and 2 NO outputs via socket connector. Alarms can be individually
programmed to initiate an associated operation when received.
1.2.10 Auto Flip
As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180
degrees and repositions itself for uninterrupted viewing of any subjects that passes directly beneath the
dome.
1.2.11 Self-diagnosis
There is a self diagnosis procedure when dome boots up.
zTilt and vertical engine check
zCamera diagnosis: it mainly includes address, baud rate, parity and etc.
1.2.12 Day/Night Mode (B/W & Color Mode)
There are several modes such as photosensor/auto/manual. This function needs the speed dome driver
(camera) supported.
1.2.13 Auto Focus
Support auto focus function.
1.2.14 Backlight Compensation
Balance the brightest and darkest sections of a scene to produce a more vivid picture.
1.2.15 Pan Tilt and Zoom
Supports zoom in and zoom out during tilt and pan movement.
In this period auto focus and auto iris can still get vivid image.
1.2.16 3D Intelligent Location
Support 3D intelligent positioning function, speed dome can auto track to the specified zone. .
1.2.17 Idle Status
When there is no available order for specified period, the speed dome can implement previously set idle
operation. The idle operation can be preset, scan, tour, pattern and etc. You can set the operation ID.
1.2.18 Power up
The speed dome executes the power up operation after it rebooted and completed the initialization. The
power up function includes auto, preset, scan, tour, pattern and none.
1.2.19 Image Stabilization/Flip
You can enable image stabilization/flip in the menu. The stabilization function can guarantee the video
stability when there is any vibration on the speed dome installation environment. The flip function allows
you to view continuous video.
This function needs the speed dome driver (camera) supported.

3
2Protocol, Baud Rate, Address Setup
Before you operate, you need to set address, baud rate and parity. Otherwise you can not control
the product!
2.1 Protocol and Baud Rate Setup
Please configure the following settings before begin controlling dome:
zBaud rate
zParity
zAddress
Note: Please reboot the speed dome to get all the setups activated!
Open the dial switch cover on the bracket, the interface is shown as below. See Figure 2-1. You can see
there are two dial switches on the PCB board.
The two dial switches can specify the speed dome parameter such as address, protocol, baud rate and
etc. For the baud rate dial switch buttons: 1-3 is NC, 4 is the 120Ωresistance, ON is to connect to the
120Ωresistance. When the button is ON, it is 1. In dial switch buttons, 1 is the lowest bit and the 8 is the
highest bit.
Figure 2-1
Please note this series speed dome can automatically recognize the industrial standard protocol,
PELCO-D. PELCO-P. usually you do not need to set the protocol.
Please refer to the baud rate sheet for detailed information.
Open dial switch
cover
Parity/Baud Rate
Setup Address Setup

4
5 6 PARITY
OFF OFF NONE
ON OFF EVEN
OFF ON ODD
ON ON NONE
Please refer to the parity setup sheet for detailed information.
7 8 Baud Rate
OFF OFF 9600bps
ON OFF 4800bps
OFF ON 2400bps
ON ON 1200bps
2.2 Set address dial switch
The encode mode adopts binary system. 1 to 8 is valid bit. The highest address bit is 255. You can refer
to the following sheet for more information.
Address 1 2 3 4 5 6 7 8
1 OFF OFF OFF OFF OFF OFF OFF OFF
1 ON OFF OFF OFF OFF OFF OFF OFF
2 OFF ON OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF
4 OFF OFF ON OFF OFF OFF OFF OFF
5 ON OFF ON OFF OFF OFF OFF OFF
6 OFF ON ON OFF OFF OFF OFF OFF
7 ON ON ON OFF OFF OFF OFF OFF
8 OFF OFF OFF ON OFF OFF OFF OFF
…… …………………………………………………………………
254 OFF ON ON ON ON ON ON ON
255 ON ON ON ON ON ON ON ON

5
3Menu
3.1 Screen Menu Index
INITIALIZATION
INFORMATIO
N
ADDR INFORMATION
SYSTEM TIME SETTING
SET NORTH
LANGUAGE : English
FACTORY DEFAULT
RESTART
BACK EXIT
PRESET
:
O
N
AZIMUTH DISP : ON
TIME DISP : OFF
POSITION : OFF
ZOOM DISP : OFF
INSIDE TEMP : OFF
TITILE DISPLAY
BACK EXIT
DISPLAY
SET
TING
SYSTEM
SETTING
CAMERA
SE
TTING
FUNCTION
SET
TING
EXIT
WB
SETTING
EXPOSURE SETTING
DAY/NIGHT SETTING
FOCUS SETUP
ZOOM SPEED
APERTURE : 8
APERTURE CNT : 9
NEXT PAGE
BACK EXIT
PRESET
AUTO PAN
AUTO SCAN
AUTO TOUR
AUTO PATTERN
IDLE MOTION
TIME TASK
NEXT PAGE
BACK EXIT
ALARM
SET
TING
ALARM
NO
:
01
ACTION : NONE
PARAMETER : N/O
CONTACT : NONE
RELAY OUT : OFF
RESET DELAY : 3S
SAVE
BACK EXIT
IR
LIGHT
SET
TING
IR
SENSITIVITY
:
4
IRLIGHT CTRL : ZOOM PRI
NEAR LIGHT : 50
FAR LIGHT : 50
IRLIGHT COMP : 3
BACK EXIT

6
ADDR ：001-H
BR ：9600
PARITY ：None
VERSION ：V1.00.0.RHNKDX
DIAGNOSIS END
SYSTEM INFO
R
MATION
DISPLAY SETTING
CAMERA SETTING
FUNCTION SETTING
ALARM SETTING
IR LIGHT SETTUING
EXIT
The above diagram illustrates the overall structure of the speed dome setup menu.
Note:
zERR means current setup is invalid. Please restore factory default setup.
zPlease make sure all the cable connections are right.
3.2 Self-diagnosis System Information
After installation, please connect speed dome to power. The system goes on a self-diagnosis, and then
it pops up the above interface to show the system information.
The above interface disappears after speed dome received the first command (or the display time lasts
for 4 minutes.)
zADDR: Here you can view dome address information. For example, 001-H, -H is the hardware
address number, -S is software address mode.
zBR: Dome communication baud rate.
zPARITY: Communication parity bit format.
zVERSION: Dome software version.
When you are using the control keyboard or the matrix host to control the device, please make
sure the control parameter of the keyboard or the matrix host is the same with the speed dome
OSD (including address, baud rate, parity). Please make sure the cable connection is OK.
3.3 Main Menu
You can open speed dome menu via control keyboard, matrix, or speed dome control terminal.
zSYSTEM INFORMATION：Dome system information, address information, system time, set north
direction, language, factory default setup, and restart and so on.
zDISPLAY SETTING: Display dome preset, azimuth display, time, direction, zoom, and dome
internal temperature and etc information.
zCAMERA SETTING：Display dome white balance setup, exposure setup, day/night setup, focus
setup, zoom speed, aperture setup, aperture restrain, digital zoom, image flip, image freeze, image
stabilization, factory default setup, camera restart and etc.
zFUNCTION SETTING: Set preset, auto pan, auto scan, auto tour, auto pattern, idle motion, time
task, privacy mask and etc.
zALARM SETTING：Set dome alarm number, action, contact, replay out, reset time and etc.
zIR LIGHT SETTING: Set dome IR sensitivity, control mode, medium and far light bright, far light bright,
IR light compensation and etc.

7
INITIALIZATION INFORMATION
ADDR INFORMATION
SYSTEM TIME SETTING
SET NORTH
LANGUAGE ：ENGLISH
FACTORY DEFAULT
RESTART
BACK EXIT
ADDR ：001-H
BR ：9600
PARITY ：NONE
VERSION ：V1.00.0.RHNKDX
BACK EXIT
zEXIT: Log out the system menu.
3.4 Menu Operation
In the speed dome main menu, you can use the left/right button on the keyboard or in the speed dome
terminal menu to configure the system menu. Before setup, please move the cursor to the current item
you want to configure.
zIn main menu, please click confirm button to go to the sub menu or use left/right key to configure
setup.
zUse up/down button to select back option and then click confirm button to go back to the previous
menu.
zUse up/down button to select exit option and then click confirm button to log out system menu.
zAll setup here will not lose when encounter power failure.
3.4.1 System Information
zINITIALIZATION INFORMATION: Move the cursor to INITIALIZATION INFORMATION and then
click confirm button to go to the third submenu.
zADDR INFORMATION: Move the cursor to SITE INFORMATION and then click confirm button to go
to the third submenu.
zSYSTEM TIME SETTING: Move the cursor to SYSTEM TIME SETTING and then click confirm
button to go to the third submenu.
zSET NORTH: Set dome benchmark direction so that you can know the angel between the
benchmark and then current location. Please move the cursor to the option and then click confirm
button until you see O.K. Now you have set north direction.
zLANGUAGE: The dome menu language. There are several languages for you to select. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set.
zFACTORY DEFAULT: Restore dome factory default setup. Please move the cursor to the option
and then click confirm button until you see O.K. Now you can see the IP dome begin rebooting to
restore factory default setup.
zRESTART: Reboot the speed dome.
zBACK: Go back to the previous menu.
zEXIT: Log out system menu.
3.4.1.1 Initialization information
Move the cursor to INITIALIZATION INFORMATION and then click confirm button, you can see the
above interface.

8
Here you can view dome basic information.
3.4.1.2 Address Information
Move the cursor to SITE INFORMATION and then click confirm button.
zADDR TYPE: There are two options: soft and hard. Please use the left/right button on the keyboard
or in the speed dome terminal menu to set.
zADDR-HARD: It is an address you set in the dial switch. You can not modify it through software.
zADDR-SOFT: You can set address via software. It is to say, you can use menu to modify dome
address. The value ranges from 0 to 255.
zBACK: Go back to the previous menu.
zEXIT: Log out system menu.
3.4.1.3 System Time Setting
zMove the cursor to SYSTEM TIME SETING and then click confirm button, you can go to the third
submenu. Please use the left/right button on the keyboard or in the speed dome terminal menu to
set. After completed setup, please click confirm button to save current setup. After you see speed
dome menu displays OK, you can see the setup is valid now.
3.4.2 Display Setting
Move the cursor to DISPLAY SETUP and then click confirm button, you can go to the third submenu.
Please use the left/right button on the keyboard or in the speed dome terminal menu to set. After
completed setup, please click save button to save current setup.
zPRESET: Display dome preset title or not. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set. You can go to Function Setup->Preset section to set
corresponding preset value and preset title.
zAZIMUTH DISP: Display dome current coordinates or not. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
zTIME DISP: Display dome system time or not. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
zPOSITION: Display the angel between the benchmark and then current location. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
ADDR TYPE ：HARD
ADDR-HARD ：001
ADDR-SOFT ：001
BACK EXIT
YEAR : 2013
MONTH : 07
DATE : 20
WEEK : FRIDAY
HOUR : 13
MINU：: 52
SAVE
BACK
EXIT
PRESET TITLE ：ON
AZIMUTH DISP ：ON
TIME DISP ：OFF
POSITION ：OFF
ZOOM DISP ：OFF
INSIDE TEMP ：℃
TITLE DISP ：OFF
BACK EXIT

9
zZOOM DISP: Display speed dome zoom speed value or not. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
zINSIDE TEMPERATURE: Display dome internal temperature or not. There are three options: ℃
/F/Off. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
zTITLE DISPLAY: Here you can set to display speed dome position information and etc. You can use
the speed dome control terminal to set the detailed title information. Please use the left/right button
to set.
zBACK: Go back to the previous menu.
zEXIT: Log out system menu.
3.4.3 Camera Setting
Move the cursor to CAMERA SETTING and then click confirm button, you can go to the submenu.
zWHITE BALANCE SETUP: It is to set camera white balance mode. Move the cursor to current
option and then click confirm button, you can go to the third menu.
zEXPOSURE SETTING: It is to set camera exposure mode, gain and etc. Move the cursor to current
option and then click confirm button, you can go to the third menu.
zDAY/NIGHT: Set day/night mode. Move the cursor to current option and then click confirm button,
you can go to the third menu.
zFOCUS SETUP: It is to set the camera focus mode, focus limit and etc. Please move the light to
highlight current item and then click the OK button to go to the next level menu.
zZOOM SPEED: The bigger the value, the faster the speed. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
zAPERTURE: It is to adjust the lens to achieve clear video. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
zAPERTURE RESTRAIN: System can auto reduce the aperture to lower the video noise when it is in
low illumination environment. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
zNEXT PAGE: It includes the following options: DIGITAL ZOOM, DIGITAL ZOOM LIMIT, PICTURE
FLIP, FREEZE FUNCTION, OUTPUT MODE, CAMERA FACTORY DEFAULT SETUP, and
CAMERA RESTART. Please use the left/right button on the keyboard or in the speed dome terminal
menu to set.
zDIGITAL ZOOM: You can use the left/right button to enable/disable the digital zoom function.
zDZOOM LIMIT: Here you can set the threshold of the digital zoom. Please use the left/right button
on the keyboard or in the speed dome terminal menu to set.
zPICTURE FLIP: There are two options: on/off. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
WB SETTING
EXPOSURE SETTING
DAY/NIGHT SETTING
FOCUS SETTING
ZOOM SPEED ：8
APERTURE ：9
APERTURE RESTRAIN ：10
NEXT PAGE
BACK EXIT
DIGITAL ZOOM ：OFF
DIGITAL ZOOM LIMIT ：X1.5
PICTURE FLIP ：OFF
FREEZE FUNC ：OFF
IMAGE STABILIZATION ：OFF
CAMERA FACTORY DEFAUTL
CAMERA RESTART
BACK EXIT

10
zFREEZE FUNCTION: This function allows the system from one preset to another preset, without
showing the video during the PTZ movement. There are two options: on/off. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
zIMAGE STABILIZATION: This function can guarantee video stability once there is any vibration on
the speed dome installation environments .
zCAMERA FACTORY DEFAULT: Move the cursor to current item and then click confirm button to
restore factory default setup.
zCAMERE RESTART: Move the cursor to current item and then click confirm button to reboot the
camera.
zBACK: Go back to previous menu.
zEXIT: Log out system menu.
3.4.3.1 White Balance Setup
Move the cursor to WHITE BALANCE MODE and then click confirm button, you can go to the submenu.
zWHITE BALANCE MODE: Set white balance adjustment mode. There are two modes: auto/manual.
Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
zR GAIN: Before you set R GAIN option, please note the mode is manual. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
zB GAIN: Before you set B GAIN option, please note the mode is manual. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
zBACK: Go back to previous menu.
zEXIT: Log out system menu.
3.4.3.2 Exposure Setting
zAE MODE: Here you can set the camera exposure mode. It includes: auto/manual/AV (iris
priority)/TV (shutter priority). Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
Auto: It is for you to set the exposure compensation, backlight compensation (BLC), slow
shutter, wide dynamic region (WDR).
Manual: It is for you to set the gain setting, shutter, iris setting, wide dynamic region (WDR).
Iris Priority (AV): It is for you to set the exposure setting, iris setting, wide dynamic region
(WDR).
Shutter Priority (TV): It is for you to set the shutter setting, exposure compensation, wide
dynamic region (WDR).
zGAIN SETTING: It is to set camera gain. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
WB MODE ：AUTO
R GAIN ：210
B GAIN ：150
BACK EXIT
AE MODE ：AUTO
GAIN SETTING ：2
SHUTTER ：1/50
IRIS SETTING ：4
EXPOSURE COMP ：8
SLOW AE ：1
SLOW SHUTTER ：ON
NEXT PAGE
BACK EXIT
AGC GAIN LIMIT ：2
HIGH GAIN ：OFF
SLOW SHUTTER LIMIT ：1/25
NOISE REDUCTION ：3
3D NOISE REDUCTION ：OFF
BLC ：OFF
WDR
AE RECOVERY ：15MIN
BACK EXIT

11
DAY/NIGHT ：AUTO
DAY TIME ：07H 00M
NIGHT TIME ：19H 00M
THRESHOLD ：4
SAVE
BACK EXIT
zSHUTTER: It is to set camera shutter. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
zIRIS SETTING: It is to set camera iris. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
zEXPOSURE COM: It is to set camera exposure compensation. Please use the left/right button on
the keyboard or in the speed dome terminal menu to set.
zSLOW AE: In the strong light environment, you can lower the camera exposure speed to capture
the image and enhance the definition. The larger the value, the faster the speed. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
zSLOW SHUTTER: In lower illumination environment, you can lower the cameras auto exposure
time to capture the image and enhance the definition. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
zNEXT PAGE: It includes: AGC GAIN LIMIT, SLOW SHUTTER LIMIT, NOISE REDUCTION, 3D
NOISE REDUCTION, BLC, WDR, BACK, and EXIT. Move the cursor to the item and then click the
left/right button to set.
oAGC GAIN LIMIT: It is to set auto gain high limit. Please click the left/right button to set.
oSLOW SHUTTER LOW LIMIT: It is to set slow shutter low limit. Please click the left/right
button to set.
oNOISE REDUCTION: There may noise when the camera is monitoring the low
illumination environments. You can use the digital filter to process the noise to
guarantee the clear video.
o3D NOISE REDUCTION: It is to set the speed dome 3D noise reduction setup. Please
use the left/right button on the keyboard or in the speed dome terminal menu to set.
oBLC: It is an abbreviation for back light compensation. System can compensate the
object in the dark light to achieve a clear video. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
oWDR: It is an abbreviation for wide dynamic region. Please make sure your camera
supports current function. This function can adjust the video brightness when the
contrast between the strong light and the dark light is too high. Move the cursor to
current item and then click the OK button to go to the fourth level menu. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
oAE RECOVERY: Manually click the “+” and “-“button on the PTZ interface, system cam
resume previous exposure value after specified time (The exposure value does not
resume if this function is off.).
zBACK: Go back to previous menu.
zEXIT: Log out system menu.
3.4.3.3 Day/Night Setting
Move the cursor to DAY/NIGHT SETTING and then click confirm button, you can go to the submenu.

12
PRESET
AUTO PAN
AUTO SCAN
AUTO TOUR
AUTO PATTERN
IDLE MOTION
TIME TASK
NEXT PAGE
BACK EXIT
FOCUS MODE ：AUTO
FOCUS LIMIT ：10CM
AF SENSITIVITY ：HGIH
IR CORRECTION ：OFF
BACK EXIT
zDAY/NIGHT: It is to set camera day/night switch mode. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
zDAY TIME: Current setup becomes valid when day/night mode is Time. Move the cursor to DAY
TIME item and then click confirm button to go to setup. Please user up/down button to set the value.
After completed setup, please click confirm button to exit and move the cursor to Save button to
save current setup.
zNIGHT TIME: Current setup becomes valid when day/night mode is Time. Move the cursor to DAY
TIME item and then click confirm button to go to setup. Please user up/down button to set the value.
After completed setup, please click confirm button to exit and move the cursor to save button to
save current setup.
zTHRESHOLD: The speed dome can switch the day/night mode when it reached the threshold you
set here.
zSAVE: This button is for DAY TIME and NIGHT TIME setup. After you set the day time (or night
time), you need to move the cursor here and then click confirm button to save current time setup.
For other setups, you do not need to use this button.
zBACK: Go back to previous menu.
zEXIT: Log out system menu.
3.4.3.4 Focus Setup
zFOCUS MODE: It is to set the camera focus mode. It includes several modes such as auto, manual,
semiautomatic. Please use the left/right button on the keyboard or in the speed dome terminal menu
to set.
zFOCUS LIMIT: It is to set the camera focus limit. Please use the left/right button on the keyboard or
in the speed dome terminal menu to set.
zAF SENSITIVITY: It is to set the camera focus sensitivity. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
zIR CORRECTION: It is to set the camera IR light focus correction. Please use the left/right button
on the keyboard or in the speed dome terminal menu to set.
zBACK: Go back to previous menu.
zEXIT: Log out system menu.
3.4.4 Function Setting

13
PRESET NO ：001
TITLE ：PRESET1
SETTING
CALL
BACK EXIT
Please go back to main menu and move the cursor to FUNCTION SETTING, click confirm button. You
can see the above interface.
zPRESET: It is to set preset. Move the cursor to PRESET and then click confirm button to go to the
third submenu.
zAUTO PAN: It is to set pan. Move the cursor to AUTO PAN and then click confirm button to go to
the third submenu.
zAUTO SCAN: It is to set scan number, speed and etc. Move the cursor to AUTO SCAN and then
click confirm button to go to the third submenu.
zAUTO TOUR: It is to set tour number, tour operation and etc. Move the cursor to AUTO TOUR and
then click confirm button to go to the third submenu.
zAUTO PATTERN: It is to set pattern number and etc. Move the cursor to AUTO PATTERN and then
click confirm button to go to the third submenu.
zIDLE MOTION: It is to set idle operation, idle time and etc. Move the cursor to IDLE MOTION and
then click confirm button to go to the third submenu.
zTIME TASK: It is to set system schedule operation. Move the cursor to TIME TASK and then click
confirm button to go to the third submenu.
zNEXT PAGE: It includes: PRIVACY MASK, PTZ SPEED, SET ZERO, POWER UP and etc. Move
the cursor to the item and then click the confirm button to set.
zBACK: Go back to previous menu.
zEXIT: Log out system menu.
3.4.4.1 Preset Setup
Move the cursor to PRESET button and then click confirm button to go to set interface.
zPRESET NO: Please use left/right key to modify preset number. The different protocols support
different preset values.
zTITLE：Title text is the label used for you to identify the camera. System will automatically name a
title for the camera.
zSETTING: Please input preset number first and then select the monitor zone. Please move the
cursor to setting and click confirm button. The system will pop up a message: PRESET: ***. Here ***
means preset number. And the SETTING column pops up an OK. Now you successfully added a
preset. Please note, you need to enable display preset title function first (Main menu->display
setting->preset title).Repeat the above procedures to set more presets. Once you want to modify a
preset, you can input the preset number you want to modify and then follow the above steps to set
the preset. You can successfully modify a preset content.
zCALL: Here is to call preset. Move the cursor to PRESET NO and then input corresponding preset
value. Then move the cursor to CALL and then click confirm button to go to a preset.
zBACK: Go back to previous menu.
zEXIT: Log out system menu.
For PELCO protocol user, please refer to the following special functions:

14
AUTO SCAN NO ：001
SET LEFT LIMIT
SET RIGHT LIMIT
SCAN SPEED ：5
CALL
STOP
BACK EXIT
zCall preset: Call preset 28 or preset 95 to go to dome menu. Call preset 29 or preset 99 to go to
scan. Call preset 24 or preset 81 to go to pattern. Call preset 25 or preset 82 to go to tour. Call
preset 30 or preset 96 to stop scan or pattern. Call preset 31 or preset 83 to begin rotation. Call
preset 33 to enable PTZ 180 degrees rotation. Call preset 34 to set dome position as 0.
zSet preset: Set preset 26 or 92 to set scan left limit. Set preset 27 or 93 to set scan right limit. Set
preset 22 or 79 to begin record. Set preset 23 or 80 to stop record.
3.4.4.2 Pan
Move the cursor to PAN button and then click confirm button to go to setup interface.
zPAN SPEED: Set dome rotation speed. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
zCALL: Move the cursor to CALL item and then click confirm button. The dome begins 360 degrees
continuous rotation.
zSTOP: Highlight stop item and then click confirm button. The dome stops rotation.
zBACK: Go back to previous menu.
zEXIT: Log out system menu.
3.4.4.3 Auto Scan
Move the cursor to SCAN button and then click confirm button.
zAUTO SCAN NO：Here is to set auto scan number. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
zSET LEFT LIMIT：Here is to set camera left address. Click confirm button to save current setup.
zSET RIGHT LIMIT：Here is to set camera right address. Click confirm button to save current setup.
zSCAN SPEED: Please use the left/right button on the keyboard or in the speed dome terminal menu
to set.
zCALL: Please input auto scan number first, and then please move the cursor to CALL and click
confirm button to activate auto scan function.
zSTOP: Here is to terminate auto scan function.
zBACK: Go back to previous menu.
zEXIT: Log out system menu.
3.4.4.4 Auto Tour
Move the cursor to highlight TOUR item and then click confirm button to go to setup interface.
TOUR NO：：1
TOUR SETTING
DELETE TOUR
CALL
STOP
BACK EXIT
PAN SPEED ：5
CALL
STOP
BACK EXIT