Idea Bass-Reflex BASSO10i User manual

1
QS_BASSO10i_EN_v3.4
BASSO10i
10˝ Bass-Reex Wall-Mount Subwoofer Quick Start Guide
BASSO10i is a very compact 10” subwoofer that delivers serious SPL levels
for installations that require professional sound reinforcement in spaces
where integration and size are key requirements.
The 10˝ low-frequency transducer allows this compact, powerful box
to deliver high-quality audio signal with maximum electro-acoustical
eciency and excellent LF performance.
This compact form-factor cabinet measures 145mm deep allowing for
unobtrusive, discreet integration into any location while providing excellent
SPL for low frequency reinforcement for professional installations thanks
to the wall-mount accessory.
Built with the same durable, rugged construction as all BASSO family
members, BASSO10i cabinet is made with 15 mm birch plywood and
nished with exclusive IDEA Aquaforce textured painting. The 1.5 mm
weatherized steel grilled with Aquaforce coating and an internal foam
panel provides long-term protection under any ambient conditions.
The wall-mount U-bracket accesory allows for
convenient installation of BASSO10i
SYSTEM CONFIGURATION AND SETTINGS
BASSO10i is an installation subwoofer for distributed audio and xed
installations that seamlessly integrates with IDEA LUA3i and LUA5i as
well as matching third-party sound reinforcement solutions.
The following are recommended amplier adjustments. Dial the
most appropriate of these settings in the amplier according to the
application ans system conguration.
For precise phase and level adjustments when setting the mid/
high frequeny loudspeakers use dedicated measurement software
(SmaartLive and SatLive).
INSTALLATION ACCESSORY
BASSO10i installation accessory allows for wall-mount tting providing
a convenient, stylish integration in the venue.
Fit the U-Bracket to the wall, then t the subwoofer using the top and
bottom M8 threaded bolts.
Preset LPF@210Hz:
HPF But24, 50Hz
LPF But 24, 210Hz
EQ1: 305Hz, Q=2, +10dB
EQ2: 497Hz, Q=3, -4dB
EQ3: 182Hz, Q=5, +3.5dB
Preset LPF@180Hz:
HPF But24, 50Hz
LPF But 24, 185Hz
EQ1: 305Hz, Q=2, +10dB
EQ2: 497Hz, Q=3, -4dB
EQ3: 167Hz, Q=5, +3.5dB
Preset LPF@225Hz:
HPF But24, 50Hz
LPF But 24, 240Hz
EQ1: 305Hz, Q=2, +10dB
EQ2: 497Hz, Q=3, -4dB
EQ3: 200Hz, Q=4, +2.5dB

2
QS_BASSO10i_EN_v3.4
TECHNICAL DATA
Enclosure design Bass Reex
Transducers 10’’
Power Handling (RMS) 300 W
Nominal Impedance 8 Ohm
SPL (Continuous/Peak) 115/121 dB SPL
Frequency Range (-10 dB) 70 - 220/260/285 Hz
Frequency Range (-3 dB) 84 - 180/210/225 Hz
Dimensions (WxHxD) 600 x 405 x 145 mm (23.62 x 15.9 x 5.7 in)
Weight 12.7 kg (28 lb)
Connectors Euroblock
Cabinet Construction 15 mm birch plywood
Grille 1.5 mm perforated weatherised steel with protective foam
Finish Durable, high-resistance IDEA-proprietary
Aquaforce paint coating process
Installation 4 x M8 inserts
Accesories U-bracket vertical (UB-B10i-V)
TECHNICAL DRAWINGS
405 mm
145 mm
600 mm

3
QS_BASSO10i_EN_v3.4
I MAS D Electroacústica SL
Pol. A Trabe 19-20 15350 CEDEIRA (Galicia - Spain)
Declares that: BASSO10i
Complies with the following EU Directives:
RoHS (2002/95/CE) Restriction of Hazardous Substances
LVD (2006/95/CE) Low Voltage Directive
EMC (2004/108/CE) Electro-Magnetic Compatibility
WEEE (2002/96/CE) Waste of Electric and Electronic Equipment
EN 60065: 2002 Audio, video and similar electronic apparatus. Safety requirements.
EN 55103-1: 1996 Electromagnetic compatibility: Emission
EN 55103-2: 1996 Electromagnetic compatibility: Immunity
DECLARATION OF CONFORMITY
WARNINGS AND SAFETY GUIDELINES
WARRANTY
QS_BASSO10i_EN_v3.4
!
• All IDEA products are guaranteed against any manufacturing defect for a period of 5 years from date of purchase for acoustical
parts and 2 years from date of purchase for electronic devices.
• The guarantee excludes damage from incorrect use of the product.
• Any guarantee repair, replacement and servicing must be exclusively done by the factory or any of authorized service centres.
• Do not open or intend to repair the product; otherwise servicing and replacement will not be applicable for guarantee repair.
• Return the damaged unit, at shipper’s risk and freight prepaid, to the nearest service centre with a copy of the purchase invoice in
order to claim guarantee service or replacement.
• Read this document thoroughly, follow all safety warnings and keep it for future reference.
• The exclamation mark inside a triangle indicates that whatever repairing and component replacement operations must be done by
qualied and authorized personnel.
• No user serviceable parts inside.
• Only use accessories tested and approved by IDEA and supplied by the manufacturer or an authorized dealer.
• Installations, rigging and suspension operations must be done by qualied personnel.
• Only use accessories specied by IDEA, complying with maximum loads specications and following local safety regulations.
• Read the specications and connection instructions before proceeding to connect the system and use only cabling supplied or rec-
ommended by IDEA. Connection of the system should be done by qualied personnel.
• Professional sound reinforcement systems can deliver high SPL levels that may result in hearing damage. Do not stand close to the
system while in use.
• Loudspeaker produce magnetic eld even while they are not in use or even when disconnected. Do not place or expose loudspeakers
to any device that is sensitive to magnetic elds such as television monitors or data storage magnetic material.
• Disconnect the equipment during lightning storms and when it is not to be used for a long time.
• Do not expose this device to rain or moisture.
• Do not place any objects containing liquids, such as bottles or glasses, on the top of the unit. Do not splash liquids on the unit.
• Clean with a wet cloth. Do not use solvent-based cleaners.
• Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace them when necessary.
• Refer all servicing to qualied service personnel.
• This symbol on the product indicates that this product should not be treated as household waste. Follow local regulation for recy-
cling of electronic devices.
• IDEA declines any responsibility from misuse that may result in malfunction or damage of the equipment.

4
QS_BASSO10i_EN_v3.4
For further information scan the QR Code
or refer to the following web address: www.ideaproaudio.com/product-detail/basso10i
www.ideaproaudio.com
IDEA is always in pursuit of better performance, greater reliability and design features.
Technical specications and minor nish details may vary without notice in order to improve our products.
©2019 - I MAS D Electroacústica SL
Pol. A Trabe 19-20 15350 Cedeira (Galicia – Spain)