Idis DA-WM2100 User manual

DA-WM2100 INSTALLATION MANUAL
This manual is intended for users of the DA-WM2100 wall mounting
bracket. It includes instructions for mounting the DA-WM2100 wall
mounting bracket to a wall.
• This bracket is intended to be used with DC-D2233 series
or DC-D1212R model of camera. Do not use it with other
models of cameras.
• This installation should be performed by a qualied
service personnel in conformance to all local codes.
• You may need to reinforce the wall. If the wall is not strong
enough to support the camera, the camera may fall.
• Do not use this product for other purposes.
Mounting
Mount the bracket to the wall as follows:
1 Mount bracket to the wall by using the anchors
and screws.
Bracket
wall
Connect your camera to the bracket as follows:
2 Screw the camera body
or bottom cover onto
bracket.
<DC-D2233 Series > <DC-D1212R >
Bracket
Camera
Body
Bracket
Bottom
Cover

IDIS Co., Ltd.
For more information, please visit www.idisglobal.com
3 Connect or screw the
camera dome cover
onto the camera body or
bottom cover.
4 Turn on power.
<DC-D2233 Series > <DC-D1212R >
Camera
Body
Camera
Dome
Cover
Bottom
Cover
Camera
Dome
Cover
Dimensions
Unit: mm (inch)
148.5 (5.85)
Ø 90 (3.54)
Ø 97.1 (3.82)
Ø 104 (4.09)
Ø 132 (5.20)
5 - M4 TAP
49˚
41˚
58.9˚
31.1˚
83.9˚
96.1˚
82.5 (3.25)
29 (1.14)
32 (1.26)
32 (1.26)
80 (3.15)
2 (0.08)
47 (1.85)
58.5˚
58.5˚
3 - Ø 4.5 (0.18)
29 (1.14)
Ver.1.0