Idis DirectCX TC-D42 RX Series User manual

DirectCX CAMERA
Installation Manual

Before reading this manual
This is a basic installation manual for use of an IDIS camera. Users who are using this product for the first time,
as well as users with experience using comparable products, must read this operation manual carefully before use and
need to the warnings and precautions contained herein while using the product. Safety warnings and precautions
contained in this operation manual are intended to promote proper use of the product and thereby prevent accidents
and property damage and must be followed at all times. Once you have read this operation manual, keep it at an easily
accessible location for future reference.
•The manufacturer will not be held responsible for any product damage resulting from the use of unauthorized
parts and accessories or from the user's failure to comply with the instructions contained in this manual.
•The information in this document is believed to be accurate as of the date of publication even though explanation
about some functions may not be incorporated.
The manufacturer is not responsible for any problems resulting from the use thereof.
The information contained herein is subject to change without notice. Revisions or new editions to this
publication may be issued to incorporate such changes.
•It is recommended that first-time users of this network camera and individuals who are not familiar
with its use seek technical assistance from their retailer regarding product installation and use.
•If you need to disassemble the product for functionality expansion or repair purposes, you must contact
your retailer and seek professional assistance.
•Both retailers and users should be aware that this product has been certified as being electromagnetically
compatible for commercial use. If you have sold or purchased this product unintentionally,
please replace with a consumer version.

Safety Precautions
WARNING:TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Important Safeguards
1. Read Instructions
All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions
The safety and operating instructions should be retained for future
reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not
use liquid aerosol cleaners. Use a damp soft cloth for cleaning.
4. Attachments
Never add any attachments and/or equipment without the approval
of the manufacturer as such additions may result in the risk of fire,
electric shock or other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Placing and Accessories
Do not place this equipment on an wall or ceiling that is not strong
enough to sustain the camera. The equipment may fall, causing
serious injury to a child or adult, and serious damage to the
equipment. Wall or shelf mounting should follow the manufacturer's
instructions, and should use a mounting kit approved by the
Manufacturer.
This equipment and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
equipment and cart combination to overturn.
Do not place this equipment in an enclosed space. Sufficient
ventilation is required to prevent an increase in ambient temperature
which can cause malfunction or the risk of fire.
7. Power Sources
This equipment should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power, please consult your equipment dealer or local power
company.
You may want to install a UPS (Uninterruptible Power Supply)
system for safe operation in order to prevent damage caused by an
unexpected power stoppage. Any questions concerning UPS, consult
your UPS retailer.
This equipment should be remain readily operable.
8. Power Cord
Operator or installer must remove power and TNT connections before
handling the equipment.
9. Lightning
For added protection for this equipment during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the equipment due to lightning
and power-line surges. If thunder or lightning is common where the
equipment is installed, use a surge protection device.
10. Overloading
Do not overload wall outlets and extension cords as this can result in
the risk of fire or electric shock.
11. Objects and Liquids
Never push objects of any kind through openings of this equipment
as they may touch dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill liquid of any kind on
the equipment.
12. Servicing
Do not attempt to service this equipment yourself. Refer all servicing
to qualified service personnel.
13. Damage requiring Service
Unplug this equipment from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. Whenthe power-supply cord or the plug has been damaged.
B. If liquid is spilled, or objects have hit the equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by following the
operating instructions, adjust only those controls that are covered
by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive work
by a qualified technician to restore the equipment to its normal
operation.
E. If the equipment has been dropped, or the cabinet damaged.
F. Whenthe equipment exhibits a distinct change in performance —
this indicates a need for service.
14. Replacement Parts
When replacement parts are required, be sure the service technician
has used replacement parts specified by the manufacturer or that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
15. Safety Check
Upon completion of any service or repairs to this equipment, ask the
service technician to perform safety checks to determine that the
equipment is in proper operating condition.
16. Field Installation
This installation should be made by a qualified service person and
should conform to all local codes.
17. Correct Batteries
Warning: Risk of explosion if battery is replaced by an incorrect type.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
The battery shall not be exposed to excessive heat such as sunshine,
fire or the like.
18. Tmra
A manufacturer’s maximum recommended ambient temperature
(Tmra) for the equipment must be specified so that the customer and
installer may determine a suitable maximum operating environment
for the equipment.

FCC Compliance Statement
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUAN
TTO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFU
L INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, U
SES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUC
TION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT I
N A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE, IN WHICH CASE USERS WILL BE REQUIRED TO CORREC
T THE INTERFERENCE AT THEIR OWN EXPENSE.
WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COUL
D VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREME
NTS OF THE CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS.
WEEE (Waste Electrical & Electronic Equipment)
Copyright
Registered Trademarks
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
©2016 IDIS Co., Ltd.
IDIS Co., Ltd. reserves all rights concerning this operation manual.
Use or duplication of this operation manual in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited.
Contents of this operation manual are subject to change without prior notice for reasons such as functionality
enhancements.
IDIS is a registered trademark of IDIS Co., Ltd.
Other company and product names are registered trademarks of their respective owners.
This product contains software built partially on open-source content. Codes for the corresponding open-
source content are available for download. For more information, refer to the software CD (OpenSourceGuide\
OpenSourceGuide.pdf) or the open source guide accompanying this operation manual.
This product and - if applicable - the
supplied accessories too are marked with
"CE" and comply therefore with the
applicable harmonized European
standards listed under the Low Voltage Directive
2006/95/EC, the EMC Directive 2004/108/EC.
EU Conformity Statement

Accessories
Upon purchasing the product, check inside the box to make sure all the following accessories are included. External
appearances and colors of the accessories may vary depending on the model.
CAMERA DRILL TEMPLATE
SCREW 4EA QUICK GUIDE
TERMINAL BLOCK(1EA.
DC12V/AC24V)

CABLE
DUAL(DC12V/AC24V)
①
BNC
(CVBS VIDEO OUT)
②
BNC
(HD-TVI VIDEO OUT)
③
DC12V / AC24V
①
②BNC-Black
DC/AC-JACK
③
BNC-Yellow
POC
①
BNC
(CVBS VIDEO OUT)
②
BNC
(HD-TVI VIDEO OUT)
①
②BNC-Black
BNC-Yellow
DIMENSION

Camera Setting Menu - 1
MENU Details-1 Details-2 Details-3
IRIS
ELC
EXPOSURE
BRIGHTNESS
0
~ 20
SHUTTER
AUTO
DEBLUR/NORMAL
MANUAL
1/30
, 1/60, 1/120 , 1/240, 1/480, 1/1000,
1/2000
, 1/4000, 1/8000, 1/15000, 1/30000
FLICKER
SENS_UP
OFF
, X2 ~ X32
AGC
0
~ 10
BACKLIGHT
OFF
HLC
MODE
NIGHT ONLY
，ALL DAY
LEVEL
0
~ 20
COLOR
BLK,COSTOMIZE,WHT,YEL,CYN,GRN
,
MAG,RED,BLU
BLC
H
-POS
0
~ 20
V
-POS
0
~ 20
H
-SIZE
0
~ 20
V
-SIZE
0
~ 20
WDR
MODE
NORMAL/ROI
WEIGHT
LOW/MIDDLE/HIGH
DAY & NIGHT
COLOR
B
& W
SMART
IR
ON/OFF
ANTI
-SAT.
0
~ 20
EXTERN
SMART
IR
ON/OFF
ANTI
-SAT.
0
~ 20
EXTERN
S/W
LOW/HIGH
DELAY
LOW/MIDDLE/HIGH
COLOR
AWB
AUTO/
AUTOext/PRESET/MANUAL
COLOR
GAIN
0
~ 20
DNR
OFF/LOW/MIDDLE/HIGH

Camera Setting Menu - 2
MENU Details-1 Details-2 Details-3
IMAGE
SHARPNESS TVI 0 ~ 10
AHD 0 ~ 10
GAMMA 0.45/0.55/0.65/0.75
MIRROR ON/OFF
FLIP ON/OFF
DEFOG
OFF
ON MODE MANUAL/AUTO
ON LEVEL LOW/MIDDLE/HIGH
PRIVACY OFF
PRIVACY ON
ZONE NUM 0 ~ 15
ZONE DISP ON/OFF
H-POS 0 ~ 60
V-POS 0 ~ 34
H-SIZE 0 ~ 60
V-SIZE 0 ~ 34
Y LEVEL 0 ~ 20
CB LEVEL 0 ~ 20
CR LEVEL 0 ~ 20
TRANS 0 ~ 3
MOTION
OFF
ON
DET WINDOW
WINDOW ZONE 0 ~ 3
WINDOW USE ON/OFF
DET H-POS 0 ~ 60
DET V-POS 0 ~ 34
DET H-SIZE 0 ~ 60
DET V-SIZE 0 ~ 34
DET TONE 0 ~ 4
MDIRECT FILL ON/OFF
SENSITIVITY 0 ~ 10
MOTION OSD ON/OFF
TEXT ALARM ON/OFF
OUTPUT
MODE
OUTPUT TVI/AHD/CVBS
FRAME RATE 1080 30P
FREQ 50Hz/60Hz

Camera Setting Menu - 3
MENU Details-1 Details-2 Details-3
SYSTEM
IMAGE RANGE FULL/COMP/USER
COLOR SPACE HD_CbCr/YUV/SD_CbCr
COLOR BAR ON/OFF
LANGUAGE ENG/KOR/JPN/CHN(S)/CHN
CAM TITLE OFF/LEFT DOWN/RIGHT UP
RESET ON
EXIT SAVE/CANCEL

Specifications
Camera
Image Sensor 1/2.8 Inch SONY CMOS
Resolution 1080P Full HD
Max. Resolution 1984(H) x 1097 (V)
TV System PAL / NTSC
Electronic Shutter Auto, 1/30~1/30,000
S/N Ratio More than 50dB
Lens
Focus Length 2.8~12mm
Pixels 2M Pixel
Night Vision
Infrared LED 24 IR LED
Infrared Distance 15M
Function
Day/Night COLOR/B&W/EXTERN
White Balance AUTO, AUTOext, PRESET, MANUAL
Gain Control Level Setting(0~20)
Noise Reduction OFF/LOW/MIDDLE/HIGH
WDR OFF/LOW/MIDDLE/HIGH
OSD Support YES
UTC YES
Operating Environment
Housing PB
Operating Temperature -10°C ~ +50°C / 32°F ~ 122°F, 30% ~ 80% RH
Storage Temperature -20℃ ~ +60℃ RH95% Max
Power & Exterior
Power Consumption DUAL / 6W POC / 9W
Dimension ￠133 x 104(H) mm

Problem
Check
The
main unit won't turn on.
•
Check the power cable connection.
•
Check the power outlet.
No Picture after providing power
• May be the power supply voltage abnormity, please check
the power supply voltage and pole whether exactitude. Please check all the
connecting cable and monitors whether be connected correctly or not.
I
can't see Live videos.
•
Check the camera's power status.
•
Check the network connection status of the computer and the network camera.
Images
are blurry.
•
Make sure the lens is clean. If not, clean it using a soft piece of cloth or a brush.
•
Make sure the lens is in focus. Adjust the focus during daytime.
•
If there is too much light coming into the camera or the camera is picking up an
overly bright light source, adjust the camera's position/angle accordingly.
Video
color appears incorrect.
Check
the white balance settings. If using the Auto option, it may take some time
for
the white balance to be adjusted.
Images
are blinking.
If the camera is pointed at the sun or a fluorescent lamp, adjust the camera's angle
away
.
The picture background color changes
continuously
The fluorescent lamp’s electromagnetic field cause color roll. This is proper
phenomenon of the cameras. Reduce the fluorescent lamp numbers or increase the
distance between the camera and the fluorescent lamps can improve it.
Use power supply external sync. camera can solve it.
The picture level direction have flowing
interference ripples
May be caused by the power supply AC ripples, it need filter the wave of the power
supply. Check the monitor and peripheral equipment used.
Trouble Shooting

IDIS Co., Ltd.
For more information, please visit at
www.idisglobal.com