IDX Motix IM-220G/98G User manual

Rechargeable Li-ion Battery Pack
IM-220G/98G
Ver:C
USER MANUAL
IDX System Technology, Inc.
Congratulations on your purchase of this product. Please read this user manual carefully.
Keep in mind the following precautions to avoid fire and other safety hazards ！
Warning
Description of appearance
Charging
Discharging
Fully charged battery will discharge naturally and please use it as
soon as it gets charged.
The battery may become warm in use or while being charged.
This is normal.
Never expose the battery to temperature above 60℃.
Keep the battery terminals clean and never short-circuit the
battery terminals.
When stored for a long time, please keep the battery power
between 50% and 90%.
Battery will automatically enter the sleep mode if rest in 10 days,
the output will be shut off. Press the button to restore output.
●
●
●
●
●
●
High performance rechargeable lithium ion battery, no memory
effect.
OLED screen display battery capacity and remaining running time.
Built in multiple control circuit, to protect the battery all-round
regarding temperature, voltage and current.
D-tap DC output, to power the camera and other equipment
simultaneously.
USB 5V/2A output, which can be used to charge mobile phones,
tablets and other portable devices.
●
●
●
●
●
Caution
Features
Do not use battery in fire or hot places to prevent overheating,
cracking and other hazards.
Please do not pierce the battery shell or try to open the shell and
decompose the battery.
Do not use battery beyond charge, discharge and storage
environment temperature.
Do not charge the battery in the car or in direct sunlight.
Do not use damaged battery.
●
●
●
●
●
Do not squeeze the battery shell which may cause physical damage.
Make sure the power-consuming equipment(s) meet the battery
specifications.
Use MOTIX charger or IDX recommended charger to charge the battery
to avoid overheating or break.
Keep out of the reach of children.
●
●
●
●
① D-TAP socket
② Button
③ USB socket
④ OLED screen
⑤ Electrode interface
⑥ Gold-mount shape lock
●
●
●
After the battery is plugged into the charger, a lightning icon will
appear in the OLED to indicate that it enters the charging state.
The battery can be charged at a temperature range of 0~40℃, but
we recommend charging at a temperature range of 10~30℃ to
ensure the best performance of the battery.
During battery charging, press the button to turn on the USB
output.
The battery can discharge at a temperature range of -20℃~50℃,
but it is suggested to discharge at a temperature range of -10~40℃
for the best performance of the battery.
During the battery discharge, ,OLED displays the remaning time
and turns on USB output after pressing the button.Press the
button briefly to switch to display the percentage of battery power,
and press the button long to display the battery cycle times from 0
to 999.
In low temperature, the internal resistance of the battery will
increases, the discharging time will be shortened, and the load
may be automatically cut off when the load is heavier.
The USB output will shut off if the load is too heavy, press the
button to restore.
●
●
●
●
Fig 1: IM-220G
Service Center Location
IDX System Technology
24422 S Main St Suite #502
Carson,CA 90745
TEL:[phone]
www.idxtek.com

Specification
Model
Battery plate
Nominal voltage
Capacity
Max output
Dimension
Net weight
Max charging current
D-TAP socket number
USB socket number
Charging temperature
Discharging temperature
IM-98G
Gold-mount
14.4V
98Wh,6.8Ah
100W,8A
100W,8A
10W,5V/2A
100W
121×95×62mm
0.800kg
3A
2
1
IM-220G
Gold-mount
14.4V
220Wh,15.3Ah
150W,12A
120W,10A
10W,5V/2A
150W
121×95×99mm
1.435kg
6A
4
1
Electrodes
D-TAP
USB
In total
0 ～ 40℃（10 ～ 30℃ recommended）
-20℃～ 50℃（-10 ～ 40℃ recommended）
Common battery protection code:
P01
P03 ～ P04
P05 ～ P07
P08 ～ P09
P10 ～ P13
Run out of power, please charge the battery asap.
Over-current when charging, please remove the battery, and it will restore after 30 seconds’ standing.
The load is too heavy, please remove the battery, and it will restore after 30 seconds’ standing.
Battery short circuit, please make sure that there is no foreign body between the electrodes or remove the battery,
and it will restore after 30 seconds’ standing.
Temperature protection, please remove the battery and place at room temperature to recover
OLED display instruction
1. Battery in rest or charging status
2. Battery in discharging status
3. OLED alarm code description
①Display Capacity percentage;
②Press the button longto display battery cycle
time from 0 ～ 999;
③Lightning icon is displayed during charging.
① Display remainning working time;
② Press button short to display the remaining
capacity percentage;
③ If the working time is less than ten hours,
it will be displayed as 0~9hours59minutes;
④ If the working time is more than ten hours,
it will be displayed as the remaining working hours.
① P01 ～ P13: The battery trigger protection function and it can be recovered;
② E01 ～ E03: Not recoverable error, please contact manufacturers to repair,
do not disassemble the battery;
③ When the battery rests over 10 days or runs out of power ,it will enter sleep
mode and the OLED will not display.
① ② ③
① ② ③ ④
① ②