ifs ANNALISA CHAIR User manual

ASSEMBLY INSTRUCTIONS
IMPORTANT: Please read these instructions carefully before attempting to
assemble or use this item.
Please keep these instructions safe for future reference
ANNALISA CHAIR

Safety Advice
Please take time to carefully read through the whole of these instructions before you commence assembly of
this product. Please follow the instructions in the order set out.
Keep these instructions for future reference.
Unpack, inspect and check o all of the contents.
Please dispose of packaging carefully and safely. Check to ensure no parts are accidentally discarded.
Small component parts could choke a child if swallowed. We strongly recommend that you keep children
away from the work area.
It is recommended that you lay a sheet or blanket on the oor where you intend to work. This would help to
avoid damage to the product and the surface of the oor. Always assemble on a at surface/oor.
This product is heavy. Take extreme care when lifting to avoid personal injury or damage to the product.
Assemble the product as close to its intended nal position in the room as possible.
It is recommended that this product be assembled by two people.
Do not fully tighten any bolts before all parts are loosely assembled. The product/ttings may be damaged
if overtightened. Beware of cross threading screws and bolts during assembly.
General Care
Wipe clean with a soft, damp cloth.
Avoid the use of all household cleaners and abrasives.
When moving your furniture, carefully lift into place.
Never drag or push the product across the oor as this will cause damage to the joints and could result in
the failure of the product. This will invalidate your warranty.
Recommendations
Periodically re-tighten the xings, maintain and clean the product.
Please check that you have all the parts listed before you start assembling this product. If you nd that something
is missing stop assembly of this product and contact your supplier immediately.
Warning
This unit is heavy. Please use an assistant when lifting
Do not for any reason use a power tool to assemble this product. It’s use will invalidate any claim you make
and could make this product unsafe.

4pcs
4pcs
JCBC M6X40MM 3pcs
SPRING WASHER M6
FLAT WASHER M6X19MM 11pcs
11pcs
ALLEN KEY M4 1pc
HARDWARE LIST
COMPLETED
STEP 1
A
B
C
D
E
G
ASSEMBLEY
JCBC M6X60MM
JCBC M6X80MM
* Screw Driver Not Provided.
PART LIST
1pc
1CHAIR BACK
1pc
2SEAT FRAME
1pc
3CUSHION SEAT
2pcs
4FRONT LEG
STEP 2
STEP 3
2
F
CSK M4X32MM 3pcs
F
1
2
3
4
A
G
ED
E
DBG
2
4
C
G
ED
2