Amart Furniture CHLOE 73197 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
CHLOE 3 SEAT SOFA
ITEM CODE: 73197
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
73197 1-5
88cm

73197
2-5

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level and spacious assembly area. Avoid hard surfaces that may
damage the product
2.Take care when lifting. Product should be assembled as close as possible to the
point of use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly
5.Keep all hardware parts and packaging out of reach of small children
6.Do not over tighten the screws and bolts as this may damage the threads
73197 3-5

INSERT PAGE NUMBER 4
STEP 1
: Turn over onto blanket or carpet to ensure no damage to item. Attach
Metal Leg (A) to sofa base using bolt(B) and washers(D) turning clockwise until
90% tightened by hand. Use Allen Key (C) to tighten securely.
Place washer (E)
and plastic leg (F) in the
centre hole and rotate until secure.
STEP 2
: Lift the backrest of the sofa upwards and place cushions in front of the
backrest.
STEP 3:Assembly complete
73197 4-5
IMPORTANT: PLEASE ENSURE FEET ARE TIGHTENED SECURELY BEFORE USE!
WARNING –Do not drag lounge on any surface due to timber base, must be lifted.
Two person Lift Recommended

73197 5-5