fantastic furniture Java User manual

Version 1.0
Java
Bookcase Lowline 6 Shelf
fantasticfurniture.com.au
Required
Two People

fantasticfurniture.com.au Page 2
Warning: Ensure the wall strap is attached
to avoid serious injury
To avoid any serious or fatal injury, a wall strap has been provided with
this product to prevent toppling. We strongly recommend that this
product is permanently fixed to the wall or other suitable surface. Fixing
of what fixing device to use.
Rattan
Rattan is a natural material that will respond to humidity in the
environment. Low humidity may cause the rattan to shrink.
High humidity may cause the rattan to absorb moisture and expand,
causing the weaving to look loose and wavy.
This is a natural phenomenon and not a defect.
Looks like you’ve found
your Fantastic!
Love it? Share it!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Fantastic buy! Share how it looks at home on Instagram
for your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Recommended weight capacity: 15kgs/shelf

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au Page 3

Parts list
Carton 1:
1 x Top Panel (P1)
1 x Left Side Panel (P2)
1 x Right Side Panel (P3)
1 x Left Divider Panel (P4)
1 x Right Divider Panel (P5)
2 x Fixed Shelves (P6)
1 x Adjustable Shelf (P7)
1 x Back Panel (P8)
1 x Bottom Panel (P9)
4 x Legs (P10)
Top Panel (P1)
What you need
to assemble the product
Other tools you need
Phillips Head Screwdriver
fantasticfurniture.com.au
Page 4
(P5)
Adjustable Shelf (P7)
Bottom Panel (P9)
Leg (P10) Leg (P10)
Left Side Panel
(P2)
Right Side Panel
(P3)
Fixed Shelf (P6) Fixed Shelf (P6)
Back Panel (P8)
Left Divider Panel (P4) Right Divider Panel (P5)
Leg (P10)
Leg (P10)

fantasticfurniture.com.au
Page 5
Hardware Pack
16 x Cam Bolts
(H1)
16 x Cam
Nuts (H2)
24 x Dowels
(H3)
8 x Bolts
(H4)
8 x Screws
(H9)
8 x Back Panel
Screws (H11)
1 x Allen Key
(H12)
4 x Felt Pads
(H5)
4 x Shelf Pins
(H8)
2 x Wall Straps
(H13)
4 x Back Panel
Connectors (H10)
12 x Flat Washers
(H6)
8 x Spring
Washers (H7)
2 x Wall Strap
Screws (H14)

Step 1
Page 6fantasticfurniture.com.au
You will need
Attach 4 x Felt Pads (H5) to the bottom of legs (P10x4)
by removing the adhesive backing and pressing firmly.
Step 2
You will need
8 x Bolts
(H4)
Attach Legs (P10x4) to Bottom Panel (P9) with 8 x Bolts (H4), 8 x Spring Washers (H7)
and 8 x Flat Washers (H6) as shown by tightening with the Allen Key (H12).
(P10)
4 x Felt Pads
(H5)
X4
(H5)
8 x Flat
Washers (H6)
8 x Spring
Washers (H7)
1 x Allen Key
(H12)
(P10)
H12
(H4)
(H6)
(H7)
(P9)
(P9)
(P10)
(P10)
(P10)
(P10)
(H4)
(H7)
(H6)

Step 3
Page 7fantasticfurniture.com.au
You will need
Step 4
You will need
Insert 8 x Dowels and attach 4 x Cam Bolts (H1)
to Left & Right Side Panels (P2&P3) as shown
by tightening with the Phillips Head Screwdriver.
16 x Dowels
(H3)
Insert 16 x Dowels (H3)
into Left & Right Divider Panels (P4&P5) and Fixed Shelves (P6x2) as shown.
Attach 4 x Cam Bolts (H1) to Left & Right Divider Panels (P4&P5) as shown
by tightening with the Phillips Head Screwdriver.
X2
4 x Cam Bolts
(H1)
Phillips Head
Screwdriver
8 x Dowels
(H3)
4 x Cam Bolts
(H1)
Phillips Head
Screwdriver
(P6)
(P4)
(P5)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H1)
(H3)
(H3)
(H3)
(H3)
(H3) (H3)
(H3)
(H3)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(P2)
(P3)

Step 5
Page 8fantasticfurniture.com.au
You will need
Step 6
You will need
4 x Cam
Nuts (H2)
4 x Cam
Nuts (H2)
(P2)
Phillips Head
Screwdriver
Phillips Head
Screwdriver
Ensure the raw edges on the shelfand
divider panel are at the back of
the bookcase before securing.
Ensure the raw edges on the shelfand
divider panel are at the back of
the bookcase before securing.
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 4 x Cam Nuts (H2) into Fixed Shelf (P6) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Left Side Panel (P2) and Left Divider Panel (P4) to Fixed Shelf (P6)
by tightening the cam nuts with the Phillips Head Screwdriver.
(P4)
(P6)
(H2)
(H2)
(H2)
(H2)
Insert 4 x Cam Nuts (H2) into
Fixed Shelf (P6) as shown.
Rotate the cam nuts
so the arrows point towards
the incoming cam bolts.
Attach Right Side Panel (P3)
and Right Divider Panel (P5)
to Fixed Shelf (P6) by tightening
the cam nuts with the Phillips Head Screwdriver.
(P3)
(P5) (P6)
(H2)
(H2)
(H2)
(H2)

Step 7
Page 9fantasticfurniture.com.au
You will need
Attach Left & Right Side Panels (P2&P3) and Left & Right Divider Panels (P4&P5) to Bottom
Panel (P9) as shown with 8 x Screws (H9) by tightening with the Phillips Head Screwdriver.
Step 8
8 x Screws
(H9)
Slide Back Panel (P8) into the grooves
of Left & Right Side Panels (P2&P3)
and Bottom Panel (P9) as shown.
Required
Two People
(P8)
(P3)
(P2)
(P9)
(P2) (P4)
(P5)
(P3)
(P9)
(H9)
Phillips Head
Screwdriver
Ensure the raw edges on all panels
are at the back of the bookcase before securing.
(H9)
(H9)
(H9)
(H9)
(H9) (H9)
(H9)

Step 9
Page 10fantasticfurniture.com.au
You will need
(P1)
(P2)
(P4) (P5)
(P3)
Insert 8 x Cam Nuts (H2) into Left & Right Side Panels (P2&P3)
and Left & Right Divider Panels (P4&P5) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Top Panel (P1) to Left & Right Side Panels (P2&P3) and Left & Right
Divider Panels (P4&P5) by tightening the cam nuts with the Phillips Head Screwdriver.
(H2)
Step 10
You will need
Attach 8 x Cam Bolts (H1) to Top Panel (P1) by tightening with the Phillips Head Screwdriver.
8 x Cam Bolts
(H1)
Phillips Head
Screwdriver
(P1)
(H1)
8 x Cam
Nuts (H2)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
Phillips Head
Screwdriver
(H2) (H2)
(H2)
(H2)
(H2)
(H2)
(H2)
Required
Two People