iGadgitz BTR006L User manual

Page 1of 6
iGadgitz Bluetooth Audio Receiver (BTR006L / U3441)
User Guide
For more instructions in English
please visit:
www.igadgitz.com/guides
Eine Anleitung in Deutsch nden Sie
unter:
Para obtener instrucciones en
Español por favor visite:
Pour obtenir des instructions en
Français s'il vous plaît aller à:
Per istruzioni in Italiano si prega di
visitare il sito:
Safety and General Information
Please read the following information before using this product.
1. Do not use the product while operating a motor vehicle.
2. To avoid electronic interference and/or compatible conflicts, turn off the
product in any facilities where posted notices instruct you to do so. For
example: Aircraft, Military Base, Hospital or Health Care Facilities.
3. Keep away from fire, water, and high voltage equipment.
4. Dot not install, place or use the receiver near any source of heat such as
a cooker, radiator, oven, toaster, coffee maker or other apparatus
(including microwave ovens) that gives off heat. Do not use in direct
sunlight.
5. It is recommended to keep the environment temperature between 15°C
& 25°C
6. Follow the battery and charging procedure in this guide to charge the
product.
7. Do not use chemicals or detergents to clean the product.
8. Do not let the receiver fall, as this may damage the internal circuits.
9. The receiver should not be submerged or exposed to water. Do not
charge if damp or wet. Ensure fully dry before charging.
IMPORTANT WARNING: Do not connect to a PC or USB charger
if receiver is damp or wet. Danger of electrocution.

Page 2of 6
Product Overview
With Bluetooth wireless technology, this iGadgitz BTR006L stereo Bluetooth audio
receiver gives you the convenient wireless way to enjoy the streaming of stereo music
transmitted from a Bluetooth A2DP*1-Source device such as MP3 players, Smartphones,
PC/Laptop or Tablet on a non-Bluetooth device with a 3.5mm audio in jack.
Notes:
*1: The playback or its plug-in Bluetooth adapter/transmitter needs to support Bluetooth
A2DP (Advanced Audio Distribution Profile).
System requirements
Audio device with 3.5mm audio input jack, for example speakers, radio, car stereo.
Bluetooth transmitting device supporting A2DP profile, such as Bluetooth enabled mobile
phones/MP3s/tablets, Bluetooth transmitter device.
Specification and technical parameters
Performance: Bluetooth Specification V2.1+EDR class 2, up to 10 meters (in open space)
Bluetooth profiles supported:
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
Battery: Built-in 300mAh Li-polymer Rechargeable
Frequency response: 2.4GHz-2.4835GHz
Receiving sensitivity: -74±4dB
Charging input: DC5.0V
Working time: 12 hours*
Standby time: 230 hours
Charging time: 2.5 hours
Dimensions: 45 × 32 × 8mm
Weight: 14g
*The maximum operating time depends on the usage frequency and environmental factors. A long distance wireless
connection and use with a mobile phone will increase the power consumption.
Diagram
Ref
Function
1
MFB (Multi-Function Button) –Powers
on/off, pairs, audio pause/play
2
Charging port - DC5.0V
3
LED indicator –indicates current status
4
3.5mm audio input jack –connects to audio
device

Page 3of 6
How to use BTR006L
Charge the battery
Fully charge the device before first use. See Battery and Charging Procedure for more details.
1. Turn on/off the receiver
Function
Operation
LED indicator
Turning on
Press and hold MFB button for 3-5 seconds
Blue LED is on for 1 second
Turning off
Press and hold MFB button for 3-5 seconds
Red LED is on for 1 second
2. Pairing
Pairing is the process of establishing an encrypted link between BTR006L and Bluetooth
enabled devices.
How to enter pairing mode on the receiver
Function
Operation
LED indicator
Entering pairing
mode
Ensure the receiver is turned off. Then
press and hold MFB button for 6-7 seconds
until Red and Blue LED light flashes
alternately
Red and Blue LED light
flashes alternately
Notes:
Pairing mode will last for 2 minutes. The receiver will switch automatically to standby mode
if no devices can be connected in this time.
Pairing with a Bluetooth enabled mobile phone/MP3 player/tablet
Step-1 Ensure your Bluetooth enabled device supports A2DP profile. The pairing procedures
will vary depending on your device. Please refer to your device’s user manual for specific
information. The steps below are general pairing procedures.
Step-2 Place the receiver and Bluetooth device close together, ideally no more than 1 metre
apart.
Step-3 Put the receiver into pairing mode (see ‘How to enter pairing mode on the receiver’)
Step-4 Follow the operating instruction of your Bluetooth device to start the pairing process.
Typically, this is done by going to a “Connect” or “Setup” menu and then selecting the option
to search for BTR006L that is still in the pairing mode.
Step-5 The device will find BTR006L and ask whether you are willing to connect your device
with the receiver. Press “Yes” or “Confirm” to confirm this action.
Step-6 Your device’s display might then prompt you for a passkey or PIN. Enter 0000 (a
sequence of four zeros) and the display should prompt the pairing result (Devices with
Bluetooth V2.1 or above should not need to do this).
If the connection is successful, the Blue LED will quickly flash twice every 4 seconds. If the
pairing is unsuccessful, please turn off the receiver and turn it on again. Then, return to
Step-1 and do the pairing procedure again.
Notes:
After successful pairing, the receiver and Bluetooth device will remember each other;
there should be no need to do the pairing procedure again.
Each time the receiver is turned on it will automatically connect to the last connected
device. If you wish to pair it with other devices please turn off the Bluetooth function of
the last connected device and pair the receiver with the new device using the ‘Pairing with
a Bluetooth enabled mobile phone/MP3 player/tablet’ procedure.
When the receiver is turned on and doesn’t connect to any devices, press the MFB button
twice. It will then connect to the last connected device.

Page 4of 6
Pairing with a Bluetooth transmitter
You can connect the receiver with a suitable Bluetooth transmitter to enjoy music wirelessly.
The operation of transmitters varies by brand; the steps below are general pairing
procedures:
Step-1 Place the receiver and Bluetooth transmitter device close together, ideally no more
than 1 metre apart.
Step-2 Put the receiver into pairing mode (see ‘How to enter pairing mode on the receiver’).
Step-3 Follow the operating instruction of your Bluetooth transmitter to start the pairing
process. Once in pairing mode it will search for Bluetooth devices automatically and send a
pairing request.
Step-4 When the receiver requests a PIN number, the transmitter should automatically
respond with ‘0000’ automatically.
If the connection is successful, the Blue LED will quickly flash twice every 4 seconds. If the
pairing is unsuccessful, please turn off both the receiver and transmitter. Then, return to
Step-1 and do the pairing procedure again. You may need to consult the Bluetooth
transmitter operating instructions for pairing with a Bluetooth receiver.
Notes:
The pairing password of the receiver is ‘0000’. The receiver can only pair with a
transmitter whose pairing password is also ‘0000’.
If pairing continues to fail, please consult the transmitter’s operating instructions for
guidance.
3. Reconnecting with a Bluetooth device
Automatic connecting
Each time the transmitter is turned on it will automatically connect to the last connected
device. If you wish to pair it with other devices please turn off the Bluetooth function of the
last connected device and pair the receiver with the new device using the ‘Pairing with a
Bluetooth receiving device’ procedure.
Manual connecting
When the transmitter is in standby mode, press the MFB button once. It will then connect to
the last connected device.
4. Power saving mode
BTR006L will automatically switch off if no devices can be connected within 5 minutes.
5. Audio playback
Once BTR006L is connected both to a speaker and a Bluetooth enabled device at the same
time you can enjoy music wirelessly.
Function
Status of BTR006L
Operation
Pause
Playing music
Short press MFB button once
Play
Pausing
Short press MFB button once
Notes:
The audio will automatically pause when you make or receive a call on a Bluetooth
enabled mobile phone
BTR006L has no microphone so calls need to be switched to the mobile phone. Audio will
automatically start again when the call is ended.

Page 5of 6
6. Key to LED indicators
LED indicator
Status of BTR006L
Red and blue LED flashes alternately
Pairing mode
Blue LED flashes once every 2 seconds
Standby mode and not connected with device
Blue LED flashes twice every 4-5 seconds
Connected with device
Red LED flashes once every 20 seconds
Low battery
Red LED on continuously
Charging
Troubleshooting
If disconnection occurs, please check the following factors:
1) Ensure that the receiver has enough power, it is turned on and has been successfully paired
to the Bluetooth device.
2) The Bluetooth function of the other device is enabled or the transmitter is switched on
3) Check whether the range between the receiver and Bluetooth device is within 10 meters
(about 30 feet) or if there is wall, other disturbance or other electrical devices between the
receiver and Bluetooth device.

Page 6of 6
Battery and Charging Procedure
BTR006L uses a rechargeable battery. A normal charging process takes about
2.5 hours. The red LED will turn on when charging and will turn off when
charging is finished. Do not charge for longer than 3 hours. This will shorten the
lifetime of the battery.
Plug the USB cable into a PC/Laptop USB port or suitable 5.0V USB power
charger. Using any incorrect power supply device will cause damage and void
the warranty.
Should the unit become hot to touch or emit smoke, switch off at the mains,
disconnect and contact the manufacturer.
After charging has finished, please remove the cable from the receiver. Do not
charge the receiver for long periods of time.
When the battery is nearly used up, the red LED will flash once every 20
seconds and you will hear 3 audible tones. Please charge the receiver at this
time.
Please make sure the battery has been fully charged and fully discharged for the
first three uses to ensure optimum battery performance.
Do not use the receiver in too hot or too cold environments. It is recommended
to keep the environment temperature between 15°C and 25°C.
Dot not connect, place or use the receiver near any source of heat such as a
cooker, radiator, oven, toaster, coffee maker or other apparatus (including
microwave ovens) that gives off heat. Do not use in direct sunlight.
Do not attempt to remove the battery from the receiver.
IMPORTANT WARNING: Do not connect to a PC or USB charger if
receiver is damp or wet. Danger of electrocution.
www.igadgitz.com
igadgitz™ is a registered trademark of INNOV8 GB Ltd. All rights reserved.
Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by the manufacturer is under license. Other trademarks and
trade names are those of their respective owners.