iHomePager HCM6900 User manual

User manual of HCM6900
I. Product introduce
HCM6900 is the fifth generation of the mobile receiver. It is also the first waterproof
bracelet mobile receiver. The waterproof grade is IPX7. The receiver can be used with all
SINGCALL call pagers. It also can be registered and download data through the serial
port.
Main characteristics
1. It is waterproof, and the waterproof grade is IPX7.
2. It has calendar, clock and alarm clock function.
3. With fast delete function, it can delete one registered number or all registered numbers
with only one key
4. Downloading the registration through the serial port, makes the registration easier.
5. It can be charged to avoid the problem of frequent battery replacement, super standby
time (about 5 days)
6. With encryption function, avoiding the information lost by mistake operation
II. Screen display
III. Product parameter
◆Key number: 2
◆Key life: Million times
◆Number of display: 10 numbers
◆Screen: OLED monochrome screen
◆Display type: a group of three-digit or five-digit number (with storage function)
◆Battery: 3.7V lithium battery
◆Battery volume: 150mAh
◆Prompt time: 01 to 15 time length
◆Receiving sensibility: -114dbm
◆Frequency: 433.92Mhz
◆Pager capacity: 500
◆Prompt mode: Vibration
◆Standby time: 5 days
◆Number deleting mode: manually, automatically
◆Calling number display: all positions can be set with English letter or digit(0-9，A-Z)
ENT
FUN
12：00
00/00
Battery indication
Alarm clock indication
Time display
Date display

IV. Operation instruction
※a. Please charge the receiver before the first using, then pressing the key ENT 5
seconds to enter into standby mode after full charging (clock display time). Please turn off
the receiver before charging. When the charging indicator light becomes green color, you
can use it.
b. Standby mode, OLED screen display will turn off automatically after 5 seconds. OLED
screen display will light by pressing keys or the pagers calling.
c. Please initialize the receiver before the first registration.
d. When the function setting cannot be use, please reference to 10 ‘password setting’to
confirm whether the pager is encryption (default set is not encryption). After decryption, all
function can be set.
1. Power on/off
1) Power on: Power off mode, press and hold key [ENT] for 5 seconds, power is on
2) Power off: Power on mode, press and hold key [ENT] for 5 seconds, power is off.
The clock time does not to be zero.
2. Initialization
1) Standby mode, press and hold [FUN] till ‘F01’appears.
2) Press [ENT] repeatedly to choose ‘F05’.
3) Press and hold [FUN] till 000 appears, and press key [ENT] 3 seconds to start the
initialization. The LED screen shows “---“. When ‘000’ appears again, the initialization
is done.
4) Press and hold [FUN] till ‘F05’appears.
5) Press and hold [ENT] till back to standby mode (time mode).The initialization is
done.

6900 the watch receiver
Number register
1) Standby mode, press and hold key [FUN], until ‘F01’shows on the screen.
2) Press and hold key [FUN] until the number ‘001’or ‘001-01’appears. There are two
kinds of number format. (Refer to step 9 to change the format)
3) Press [ENT] to change the flashing number, press [FUN] to move the cursor (each
position can set from 0-9 and A-Z).
4) Press and hold key [ENT] to delete the current number. (If this number is registered
before, the number is flashing that means deletion is successful. Otherwise, the
number will not flash that mean this number is not registered before.)
5) After getting the number you want, press down the call pager, the receiver vibrated
with the registered number flashing on the screen, the registration is finished.
6) To register more than one pager, please repeat the 5) after the first one finished.
7) After finishing the all numbers, press and hold key [FUN] till ‘F01’shows on screen.
8) Press and hold [ENT] till back to standby mode. The register is done.
※Special instructions:
Can register 500 numbers at most
During the registration, if the number does not flash or vibrate that means the number is
not registered successfully. You can judge the problems according to the digits behind the
calling number:
1-Means this number is not registered, but this pager has been registered to another
number.
2-Means this number has been registered by other pager before.
3-Means the pager and number are both registered successfully.
4-Means the number capacity has got the limitation of 500.
No digit means the receiver did not get the calling signal.
4. Delete the calling number
The calling number shows on the screen (The cycle interval time is two seconds, the
maximum is ten numbers.)
1) Press and hold [FUN] to delete all called numbers to back to standby mode. This way
can delete all called numbers with only one key.
2) Short press [ENT] to delete the current calling number. This way can delete the current
calling numbers with only one key.
5. Vibration time setting
1) Standby mode, press and hold key [FUN] 3 seconds till ‘F01’appears.
2) Press key [ENT] to choose ‘F02’.
3) Press and hold [FUN] till a number ‘01-15’appears. Press key [ENT] to choose the
number you want. (‘01-15’means 1-15 seconds of vibration prompt time, one digit
means one second.)
4) Press and hold [FUN] till ‘F02’appears again.
5) Press and hold [ENT] till back to standby mode, vibration time setting is done.

6. Display time setting
1) Standby mode, press and hold key [FUN] 3 seconds till ‘F01’appears.
2) Press key [ENT] repeatedly to choose ‘F03’.
3) Press and hold [FUN], till a number between 00 and 99 appears. Press [ENT] to change
the flashing number, press [FUN] to change the cursor position. The number 01-99
means the time is 01-99 seconds, 00 means unlimited display.
4) Press and hold [FUN] till ‘F03’appears.
5) Press and hold [ENT] till back to standby mode. The display time setting is done.
7. Deleting registered numbers
1）Standby mode, press and hold [FUN] 3 seconds till ‘F01’appears.
2) Press [ENT] repeatedly to choose ‘F04’.
3) Press and hold [FUN] till the smallest registered number appears on screen.
4) Press [FUN] repeatedly to choose the number to be deleted, then press and hold [ENT]
to delete it. And the next registered number will appear on the screen after the deleting.
5) Press and hold [FUN] till ‘F04’appears.
6) Press and hold [ENT] till back to standby mode. Deleting is done.
8. Time setting
1) Standby mode, press and hold [FUN] 3 seconds till ‘F01’ appears.
2) Press [ENT] repeatedly to choose ‘F06’.
3) Press and hold [FUN] into the time mode, for example ‘08︰10 16/05/25’(hour, minute,
year, month, day) appears.
4) Press [ENT] to set clock time and year, month, day and press [FUN] to choose hour,
minute, year, month, day.
5) After time setting, press and hold [FUN] till ‘F06’appears.
6) Press and hold [ENT] till back to standby mode. Time setting is done.
※Time will return to zero if the battery used out. It needs to reset after charging.
9. Number display mode setting
1) Standby mode, press and hold [FUN] till ‘F01’appears.
2) Press [ENT] repeatedly to choose ‘F07’.
3) Press and hold [FUN] till ‘00’ or ‘01’appears

‘00’means the number display mode is XXX (the default number is ‘00’)
‘01’means the number display mode is XXX-XX
Press [ENT] to change the number between ‘00’and ‘01’.
4) Press and hold [FUN] till ‘F07’appears.
5) Press and hold [ENT] to back to standby mode. Display mode setting is done.
10. Password setting
1) Standby mode, press and hold [FUN] 3 seconds till ‘F01’appears.
2) Press [ENT] repeatedly to choose ‘F08’.
3) Press and hold [FUN] till XXX appears on screen.
4) Press [ENT] to change the flashing number, press [FUN] to change the cursor position
(the password is 181. Only when the number is 181, all functions can be set.
Notes: It is better to set the password after all functions have been set. (If the number is
not 181, all functions can not be set.) In case that the products is not used normally by
mistake changes of the information.
5) Press and hold [FUN] till ‘F08’appears.
6) Press and hold [ENT] till back to standby mode. Password setting is done.
11. Alarm clock setting
1) Standby mode, press and hold [FUN] 3 seconds till ‘F01’appears.
2) Press [ENT] repeatedly to choose ‘F09’.
3) Press and hold [FUN] till ‘1 XX:XX’or ‘2 XX:XX’appears on the screen(1 and 2 are the
sequence numbers of the alarm. XX:XX is hour and minute ).
4) Press [ENT] to set the sequence number of clock, hour and minute, press [FUN] to
choose the position.
5) Press and hold [FUN] till ‘F09’appears.
6) Press and hold [ENT] till back to standby mode. Alarm clock setting is done.
12. Choose alarm clock ON or OFF
1) Standby mode, Press and hold [FUN] 3 seconds till ‘F01’appears.
2) Press [ENT] repeatedly to choose ‘F10’.
3) Press and hold [FUN] till ‘1: ON/OFF’or ‘2: ON/OFF’appears on the screen. (1and 2 are
the sequence numbers of alarm, ON-turn on, OFF-turn off）
4) Press [ENT] to choose the alarm clock to ON or OFF, press [FUN] to choose the alarm
clocks.
5) Press and hold [FUN] till ‘F10’appears.
6) Press and hold [ENT] till back to standby mode. Alarm clock ON/OFF setting is done.
Note: when the alarm clock is on,
a) Alarm prompt mode is vibration
b) Alarm prompt time is the same with the vibration time set in ‘F02’
c) Alarming in standby mode or calling mode (called number is displaying on the screen),
alarm mark is flashing.

d) Press key [FUN] for one second to stop alarming.
13. Data downloading function
(F11)(Please refer to the manual of SINGCALL data download software)
V. Attention
1. When the product does not use for a long time, it is better to charge every two months
to avoid damaging the battery. Charge the receiver before showing the low battery. It can
prolong the life of battery. The product may shut down automatically when battery is low.
2. Please use our original parts, especially the original battery and charger.
3. Only after quitting from the setting mode, all the functions can be back to working
mode.
4. If you find any unusual problems, please consult our after-sale staff immediately. Do
not dismantle the products by yourself to cause the unnecessary troubles.