IKEA MATMASSIG 504-672-51 User manual

MATMÄSSIG
GB
FR

ENGLISH
Please refer to the last page of this manual for the full list of
IKEA appointed After Sales Service Provider and relative
national phone numbers.
FRANÇAIS
Vous trouverez la liste complète des centres de service
après-vente choisis par IKEA et leurs numéros de téléphone
respectifs à la n de cette notice.

ENGLISH 4
FRANÇAIS 24

Contents
Safety information 4
Safety instructions 6
Installation 8
Electrical connection 9
Product description 11
Daily use 13
Cooking table 16
Cookware guidance 16
Care and cleaning 17
Troubleshooting 18
Technical data 20
Energy eciency 20
Environmental concerns 21
IKEA guarantee 21
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read
the supplied instructions. The manufacturer is not responsible
if an incorrect installation and use causes injuries and
damage. Always keep the instructions with the appliance for
future reference.
Children and vulnerable people safety
•This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved.
•Children between 3 and 8 years of age and persons with
very extensive and complex disabilities shall be kept away
from the appliance unless continuously supervised.
•Children of less than 3 years of age should be kept away
from the appliance unless continuously supervised.
•Do not let children play with the appliance.
•Keep all packaging away from children and dispose of it
appropriately.
ENGLISH 4

•Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts may
become hot during use.
•If the appliance has a child safety device, it should be
activated.
•Children shall not carry out cleaning and user maintenance
of the appliance without supervision.
General Safety
•WARNING: The appliance and its accessible parts become
hot during use. Care should be taken to avoid touching
heating elements.
•Do not operate the appliance by means of an external timer
or separate remote-control system.
•WARNING: Unattended cooking on a hob with fat or oil can
be dangerous and may result in re.
•NEVER try to extinguish a re with water, but switch o the
appliance and then cover ame e.g. with a lid or a re
blanket.
•CAUTION: The cooking process has to be supervised. A short
term cooking process has to be supervised continuously.
•WARNING: Danger of re: Do not store items on the cooking
surfaces.
•Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
•Do not use the appliance before installing it in the built-in
structure.
•Disconnect the appliance from the electrical supply before
maintenance.
•Do not use a steam cleaner to clean the appliance.
•After use, switch o the hob element by its control and do
not rely on the pan detector.
ENGLISH 5

•If the glass ceramic surface / glass surface is cracked, switch
o the appliance and unplug it from the mains. In case the
appliance is connected to the mains directly using junction
box, remove the fuse to disconnect the appliance from
power supply. In either case contact the Authorised Service
Centre.
•If the supply cord is damaged, it must be replaced by the
manufacturer, the Authorised Service Centre or similarly
qualied persons in order to avoid a hazard.
•WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by the
manufacturer of the appliance in the instructions for use as
suitable or hob guards incorporated in the appliance. The
use of inappropriate guards can cause accidents.
Safety instructions
Installation
Warning! The appliance must be
installed by the authorised
installer.
Follow the Assembly instructions
supplied with the appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Keep the minimum distance from other
appliances and units.
• Always take care when moving the
appliance as it is heavy. Always use safety
gloves and enclosed footwear.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance from
steam and moisture.
• Do not install the appliance adjacent to a
door or under a window. This prevents
hot cookware falling from the appliance
when the door or the window is opened.
• Make sure that the space underneath the
hob is sucient for air circulation.
• The bottom of the appliance can get hot.
If the appliance is installed above the
drawers, make sure to install a non-
combustible separation panel under the
appliances to prevent access to the
bottom.
Electrical Connection
Warning! Risk of re and electric
shock.
• All electrical connections should be made
by the authorised installer.
• The appliance must be earthed.
• Before carrying out any operation make
sure that the appliance is disconnected
from the power supply.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Make sure the appliance is installed
correctly. Loose and incorrect electricity
ENGLISH 6

mains cable or plug (if applicable) can
make the terminal become too hot.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable
tangle.
• Make sure that a shock protection is
installed.
• Use the strain relief clamp on the cable.
• Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug (if applicable) or to the mains
cable. Contact our Authorised Service
Centre or an electrician to change a
damaged mains cable.
• The shock protection of live and insulated
parts must be fastened in such a way that
it cannot be removed without tools.
• Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm.
Use
Warning! Risk of injury, burns
and electric shock.
• Remove all the packaging, labelling and
protective lm (if applicable) before rst
use.
• This appliance is for household use only.
• Do not change the specication of this
appliance.
• Make sure that the ventilation openings
are not blocked.
• Do not let the appliance stay unattended
during operation.
• Set the cooking zone to “o” after each
use.
• Do not rely on the pan detector.
• Do not put cutlery or saucepan lids on the
cooking zones. They can become hot.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not use the appliance as a work
surface or as a storage surface.
• If the surface of the appliance is cracked,
disconnect immediately the appliance
from the power supply. This to prevent an
electrical shock.
• Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
• When you place food into hot oil, it may
splash.
Warning! Risk of re and
explosion
• Fats and oil when heated can release
ammable vapours. Keep ames or
heated objects away from fats and oils
when you cook with them.
• The vapours that very hot oil releases can
cause spontaneous combustion.
• Used oil, that can contain food remnants,
can cause re at a lower temperature
than oil used for the rst time.
• Do not put ammable products or items
that are wet with ammable products in,
near or on the appliance.
Warning! Risk of damage to the
appliance.
• Do not keep hot cookware on the control
panel.
• Do not put a hot pan cover on the glass
surface of the hob.
• Do not let cookware boil dry.
• Be careful not to let objects or cookware
fall on the appliance. The surface can be
damaged.
ENGLISH 7

• Do not activate the cooking zones with
empty cookware or without cookware.
• Do not put aluminium foil on the
appliance.
• Cookware made of cast iron, aluminium
or with a damaged bottom can cause
scratches on the glass / glass ceramic.
Always lift these objects up when you
have to move them on the cooking
surface.
• This appliance is for cooking purposes
only. It must not be used for other
purposes, for example room heating.
Care and cleaning
• Clean the appliance regularly to prevent
the deterioration of the surface material.
• Switch o the appliance and let it cool
down before cleaning.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do not
use abrasive products, abrasive cleaning
pads, solvents or metal objects.
Service
• To repair the appliance contact the
Authorised Service Centre. Use original
spare parts only.
• Concerning the lamp(s) inside this
product and spare part lamps sold
separately: These lamps are intended to
withstand extreme physical conditions in
household appliances, such as
temperature, vibration, humidity, or are
intended to signal information about the
operational status of the appliance. They
are not intended to be used in other
applications and are not suitable for
household room illumination.
Disposal
Warning! Risk of injury or
suocation.
• Contact your municipal authority for
information on how to discard the
appliance correctly.
• Disconnect the appliance from the mains
supply.
• Cut o the mains electrical cable close to
the appliance and dispose of it.
Installation
Warning! Refer to Safety
chapters.
ENGLISH 8

General information
min.
28 mm
max.
R 5 mm
490±1
mm
560±1
mm
520 mm
590 mm
min.
55 mm
min.
500 mm
min.
28 mm
min. 50 mm
min.
5 mm
Installation process must follow
the laws, ordinances, directives
and standards (electrical safety
rules and regulations, proper
recycling in accordance with the
regulations, etc.) in force in the
country of use!
• For further information on the installation
refer to the Assembly Instruction.
• If there is no oven beneath the hob,
install a separation panel under the
appliance according to the Assembly
Instruction.
• Do not use silicon sealant between the
appliance and the worktop.
Electrical connection
Warning! Refer to Safety
chapters.
Warning! All electrical
connections must be made by an
authorised installer.
Electrical connection
• Before connecting, check if the nominal
voltage of the appliance, provided on the
rating plate, corresponds to the available
supply voltage. The rating plate is located
on the lower casing of the hob.
• Follow the connection diagram (it is
located on the underneath surface of the
casing of the hob).
• Use only original spare parts provided by
spare parts service.
• The appliance is not provided with a
mains cable. Buy the right one from a
specialized dealer. Single phase or two-
phase connection requires a mains cable
of minimum 70°C temperature stability.
Cable needs mandatory end sleeves.
According to IEC regulations use for one-
phase connection: mains cable 3 x 4mm²
and for two-phase connection: mains
ENGLISH 9

cable 4 x 2.5mm². Please respect specic
national regulations in the rst priority.
• You must have the means for
disconnection incorporated in the xed
wiring.
• You must have the connection and the
connecting links carried out as shown in
the connection diagram.
• The earth lead is connected to terminal
and must be longer than leads carrying
electric current.
• Secure the connecting cable with cable
clips or clamps.
Connection diagram
220V-240V 1N
220V-240V
N PE
L
400V 2N
220V-240V
220V-240V
N
L1 L2 PE
Insert the shunts between the screws as shown.
Main power connection 1-phase Main power connection 2-phase
L N
L1 L2 L3 N
Wiring colours: Wiring colours:
Yellow / green Yellow / green
N Blue N Blue
L Black or brown L1 Black
L2 Brown
Tighten the terminal screws
securely!
Once you connect the hob to the mains,
check if all the cooking zones are ready to
use. Place a pot with some water on a
cooking zone and set the power setting for
each zone to the maximum level for a short
time.
If or symbol comes on
the display after you switch on
the hob for the rst time, refer to
"Troubleshooting".
ENGLISH 10

Product description
Cooking surface layout
3
1 2
45
1Single cooking zone (180 mm) 1800 W
2Single cooking zone (180 mm) 1800 W,
with Booster 2500 W
3Single cooking zone (145 mm) 1400 W
4Control panel
5Single cooking zone (210 mm) 2300 W,
with Booster 3200 W
ENGLISH 11

Control panel layout
789
43 61 2 5
1 To switch the appliance on / o.
2 To activate and deactivate Lock / Child
Lock / Cleaning mode.
3 To activate Booster (Display
shows ).
4Power setting display: , - .
5 Timer indicators of cooking zones.
6Timer display: 00 - 99 minutes.
7 / To increase or decrease the time.
8 / To increase or decrease the
power setting.
9 To activate Pause.
Power setting displays
Display Description
The cooking zone is deactivated.
- The cooking zone operates.
Pause operates.
Booster operates.
+ digit There is a malfunction. Refer to "Troubleshooting".
A cooking zone is still hot (residual heat).
Lock / Child Lock / Cleaning mode operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch O operates.
Residual heat indicator
Warning! There is a risk of
burns from residual heat.
The indicators show the level of the residual
heat for the cooking zones you are currently
using. The indicators may also come on for
the neighbouring cooking zones even if you
are not using them.
ENGLISH 12

The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware. The
glass ceramic is heated by the heat of the
cookware.
Daily use
Switching on / o
Touch for 1 second to switch the
appliance on / o.
Automatic Switch O
The function switches o the appliance
automatically if:
• all cooking zones are deactivated.
• you do not set the power setting after
switching on the appliance.
• you cover any symbol with an object (a
pan, a cloth, etc.) for longer than approx.
10 seconds.
• you do not deactivate a cooking zone
after a certain time, or you do not modify
the power setting, or if overheating
occurs (e.g. when a pan boils dry). The
symbol lights up. Before using again,
you must set the cooking zone to .
Power setting Automatic switch o
after
, - 6 hours
- 5 hours
4 hours
- 1.5 hours
If cookware that is not suitable is
used, lights up on the display
and after 2 minutes the indicator
for the cooking zone deactivates.
Adjusting the power setting
Set the power setting with to increase.
Set the power setting with to decrease.
Touch and of a respective cooking
zone simultaneously to deactivate the
cooking zone. The settings will reverse to .
Using the Booster function
The Booster function makes additional
power available for the induction cooking
zones. Touch to activate it,
lights up on the display. After a maximum of
10 minutes, the induction cooking zones
automatically return to the power setting.
ENGLISH 13

Using the Timer
Touch repeatedly until the indicator of a
desired cooking zone ashes. For example,
for the front right zone .
Touch or of the Timer to set the time
between 00 and 99 minutes. When the
indicator of the cooking zone ashes slower,
the Timer counts down. Set the power
setting.
When the power setting is set and the time
comes to an end, an acoustic signal sounds,
00 ashes, and the cooking zone
deactivates.
Touch to deactivate the function for the
selected cooking zone. The indicator of the
cooking zone ashes faster. Touch and
the remaining time counts backwards to 00.
The indicator of the cooking zone goes out.
Minute Minder
You can also use this function as a Minute
Minder when the appliance works but the
cooking zones do not operate. The power
setting display shows 0.
To activate the function, touch . Touch
or to set the time.
When the time comes to an end, an acoustic
signal sounds and 00 ashes. Touch to
stop the signal.
The function has no eect on the
operation of the cooking zones.
Pause
The function sets all cooking zones that
operate to the lowest power setting .
When the function operates, you cannot
change the power setting. The function does
not stop the Timer function.
• To activate this function touch . The
symbol comes on.
• To deactivate this function touch . The
power setting that you set before comes
on.
Lock / Cleaning mode
You can lock the control panel and keep the
cooking zones operating. It prevents an
accidental change of the power setting.
Use the function to clean the
surface of the hob during the
cooking session, if needed.
First set the power setting.
To start the function touch . The symbol
comes on for 4 seconds. The Timer stays
on.
To stop the function touch . The power
setting that you set before comes on.
When you switch o the appliance, you also
stop this function.
Child Lock
This function prevents an accidental
operation of the appliance.
To activate the function:
• Switch on the appliance with . Do not
set the power settings.
• Touch for 4 seconds. The symbol
comes on.
• Switch o the appliance with .
To deactivate the function:
ENGLISH 14

• Switch on the appliance with . Do not
set the power settings. Touch for 4
seconds. The symbol comes on.
• Switch o the appliance with .
To override the function for only one cooking
time:
• Switch on the appliance with . The
symbol comes on.
• Touch for 4 seconds. Set the power
setting in 10 seconds. You can operate the
appliance.
• When you switch o the appliance with
, the function operates again.
OSound Control (Deactivation and
activation of the sounds)
Originally the sounds of the appliance are
activated.
Activating and deactivating the sounds:
1. Switch o the appliance.
2. Touch for 3 seconds. The display
comes on and goes out.
3. Touch for 3 seconds. or comes
on.
4. Touch of the Timer to choose one of
the following:
• - the sound is o.
• - the sound is on.
To conrm your selection wait until the
appliance switches o automatically.
When the function is set to you can hear
the sound only when:
• you touch ,
• Minute Minder comes down,
• you put something on the control panel.
If there is a problem with
electrical supply and the
appliance switches o it does not
keep previous settings.
Power exchange function
• Cooking zones are grouped according to
the location and number of the phases in
the hob. See the illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power between
cooking zones connected to the same
phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds 3700
W.
• The function decreases the power of the
other cooking zones connected to the
same phase.
• The power setting display of the reduced
zones changes between two levels.
ENGLISH 15

Cooking table
Heat setting Use to: Time
(min)
Hints
1 Keep cooked food warm. as nec‐
essary
Put a lid on the cookware.
1 - 2 Hollandaise sauce, melt: butter,
chocolate, gelatine.
5 - 25 Mix from time to time.
1 - 2 Solidify: uy omelettes, baked
eggs.
10 - 40 Cook with a lid on.
2 - 3 Simmer rice and milkbased
dishes, heat up ready-cooked
meals.
25 - 50 Add at least twice as much liq‐
uid as rice, mix milk dishes
halfway through the proce‐
dure.
3 - 4 Steam vegetables, sh, meat. 20 - 45 Add a couple of tablespoons of
liquid.
4 - 5 Steam potatoes. 20 - 60 Use max. ¼ l of water for 750 g
of potatoes.
4 - 5 Cook larger quantities of food,
stews and soups.
60 - 150 Up to 3 l of liquid plus ingredi‐
ents.
6 - 7 Gentle fry: escalope, veal cor‐
don bleu, cutlets, rissoles, saus‐
ages, liver, roux, eggs, pan‐
cakes, doughnuts.
as nec‐
essary
Turn halfway through.
7 - 8 Heavy fry, hash browns, loin
steaks, steaks.
5 - 15 Turn halfway through.
9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
Boil large quantities of water. Booster is activated.
The data in the table is for
guidance only.
Cookware guidance
Warning! Refer to Safety
chapters.
What pots to use
Only use cookware which is suitable for
induction hobs. The cookware must be made
of a ferromagnetic material, such as:
ENGLISH 16

• cast iron;
• enamelled steel;
• carbon steel;
• stainless steel (most types);
• aluminium with ferromagnetic coating or
a ferromagnetic plate.
To determine if a pot or pan is suitable,
check for the symbol (usually stamped on
the bottom of the cookware). You can also
hold a magnet to the bottom. If it clings to
the underside, the cookware will work on the
induction hob.
To ensure optimum eciency, always use
pots and pans with a at bottom that
distributes the heat evenly. If the bottom is
uneven, this will aect power and heat
conduction.
How to use
Minimum diameter of pot / pan base for
the dierent cooking areas
To ensure that the hob operates properly,
the cookware must have a suitable minimum
diameter as well as cover one or more of the
reference points indicated on the surface of
the hob.
Always use the cooking zone that best
corresponds to the diameter of the bottom
of the cookware.
Cooking zone Cookware diame‐
ter [mm]
Left rear 145 - 180
Left front 125 - 210
Right rear 145 - 180
Right front 125 - 145
Empty or thin-based pots / pans
Do not use empty pots / pans or cookware
with thin bases on the hob as it will not be
able to monitor the temperature, or will turn
o automatically if the temperature is too
high. This may result in the damage of the
cookware or the hob surface. If such a
situation occurs, do not touch anything and
wait for all components to cool down.
If an error message appears, refer to
"Troubleshooting".
Hints / tips
Noises during cooking
When a cooking zone is active, it may hum
briey. This is characteristic of all ceramic
glass cooking zones and does not impair
either the function or the life of the
appliance. The noise depends on the
cookware used. If it causes considerable
disturbance, it might help to change the
cookware.
Care and cleaning
General information
Warning! Switch o the appliance
and let it cool down before you
clean it.
Warning! For safety reasons, do
not clean the appliance with
steam blasters or high-pressure
cleaners.
Warning! Sharp objects and
abrasive cleaning agents will
damage the appliance. Clean the
appliance and remove the
residues with water and dish soap
after each use. Remove also the
remnants of the cleaning agents.
Scratches or dark stains on the
glass ceramic that cannot be
removed do not aect the
functioning of the appliance.
ENGLISH 17

Removing the residues and stubborn
residues
Food containing sugar, plastics, or tin foil
residues should be removed at once. A
scraper is the best tool for cleaning the glass
surface. It is not supplied with the appliance.
Place a scraper on the hob surface at an
angle and remove residues by sliding the
blade over the surface. Clean the appliance
using a damp cloth and some dish soap.
Finally, wipe the glass surface dry with a
clean cloth.
Limescale rings, water rings, fat splashes, or
shiny metallic discolourations should be
removed after the appliance has cooled
down. Use only a specialised cleaner for
glass ceramic or stainless steel.
Troubleshooting
Warning! Refer to Safety
chapters.
What to do if…
Problem Possible cause Remedy
You cannot switch on the
appliance or operate it.
The appliance is not connec‐
ted to an electrical supply or
it is connected incorrectly.
Check if the appliance is cor‐
rectly connected to the electri‐
cal supply. Ensure a correct in‐
stallation by calling an author‐
ised installer.
More than 10 seconds
passed since you switched
on the appliance.
Switch on the appliance again.
Child Lock or Lock is on . Deactivate Child Lock. Refer to "
Child Lock" or " Lock".
Several symbols on the con‐
trol panel were touched at
the same time.
Touch only one symbol at a
time.
There is water or fat stains
on the control panel.
Clean the control panel and
wait for a few seconds before
switching on again.
An acoustic signal sounds
and the appliance switches
o.
One or more symbols on the
control panel have been cov‐
ered for longer than 10 sec‐
onds.
Remove any objects from the
symbols.
The display keeps switch‐
ing between two power
settings.
Power exchange function is
reducing the power of this
cooking zone.
Refer to " Power exchange
function".
ENGLISH 18

Problem Possible cause Remedy
Residual heat indicator is
not displaying anything.
The cooking zone was only
on for a short time and is
therefore not hot.
If the cooking zone is supposed
to be hot, call the After Sales
Service.
There is no signal when
you touch panel symbols.
The signals are deactivated. Activate the signals. Refer to
"OSound Control".
comes on. Unsuitable cookware. Use suitable cookware.
No cookware on the cooking
zone.
Place cookware on the cooking
zone.
The diameter of the bottom
of the cookware is too small
for the cooking zone.
Move onto a smaller cooking
zone.
and a number come on. There is an error in the hob. Disconnect the hob from the
electrical supply for some time.
Disconnect the fuse from the
electrical system of the house.
Connect it again. If comes
on again, speak to an author‐
ised installer.
comes on after switch‐
ing on the appliance.
The electrical connection is
incorrect.
Check if the appliance is cor‐
rectly connected to the electri‐
cal supply. Ensure a correct in‐
stallation by calling an author‐
ised installer.
comes on. Automatic Switch O and the
overheating protection for
the cooking zone operate.
Switch o the appliance. Re‐
move the hot cookware. After
approximately 30 seconds acti‐
vate the cooking zone again.
should disappear, Residual
heat indicator can stay. Cool
down the cookware and check
it with "Cookware guidance".
comes on. The electrical connection is
incorrect. The hob is connec‐
ted to one phase only.
Check if the appliance is cor‐
rectly connected to the electri‐
cal supply. Ensure a correct in‐
stallation by calling an author‐
ised installer.
The electronics may be dam‐
aged.
Contact your IKEA store call
centre.
ENGLISH 19

Problem Possible cause Remedy
You can hear a constant
beep noise.
The electrical connection is
incorrect.
Disconnect the hob from the
electrical supply. Ensure a cor‐
rect installation by calling an
authorised installer.
If there is a fault, try to resolve it by following
the troubleshooting guidelines.
If the problem cannot be resolved, contact
your IKEA store or the After Sales Service.
You can nd a full list of IKEA appointed
contacts at the end of this user manual.
If you operated the appliance
wrongly, or the installation was
not carried out by an authorised
installer, the visit from the After
Sales Service technician or dealer
may not take place free of charge,
even during the warranty period.
Technical data
Rating Plate
PQM
21552
000.000.00
Country of origin
© Inter IKEA Systems B.V. 1999
DGT
230 V
Model 00000000
PNC 000 000 000 00 S No .................... 220V-240V AC 50-60 Hz
Typ 60 GAD DC AU 7.35kW
IKEA of Sweden AB
SE - 343 81 Älmhult
The graphic above serves to represent the
rating plate of the appliance. The actual
rating plate is located on the bottom of the
casing. The serial number is specic to each
product.
Dear Customer, keep the additional rating
plate with the user manual. This will allow us
to assist you better by identifying precisely
your hob, in case you need our assistance in
the future. Thank you for your help!
Energy eciency
Product information according to EU 66/2014 valid for EU market only
Model identication MATMÄSSIG
504-672-51
Type of hob Built-In Hob
Number of cooking zones 4
Heating technology Induction
ENGLISH 20