IKEA BEJUBLAD User manual

GB
DE
FR
IT
BEJUBLAD

ENGLISH 4
DEUTSCH 28
FRANÇAIS 53
ITALIANO 78
2
1345
2
1345
2
1345
2
1345
Please refer to the last page of
this manual for the full list of IKEA
appointed Authorized Service
Centre and relative national phone
number
Consultare l’ultima pagina di
questo manuale dove è riportato
l’elenco completo dei Centri
Assistenza IKEA Autorizzati con i
relativi numeri telefonici nazionali.
Consultez la dernière page de ce
manuel contenant la liste complète
des services Après-vente agréés
IKEA avec les numéros de téléphone
nationaux correspondants.
Konsultieren Sie die letzte Seite
dieser Bedienungsanleitung,
auf der die vollständige Liste der
nationalen autorisierten IKEA
Kundendienststellen mit den
entsprechenden Telefonnummern
aufgelistet ist.

4 ENGLISH
Contents
Safety information
For your own safety and to ensure proper operation of
the appliance, please read this manual carefully before
installation and operation. Keep these instructions together
with the appliance, even if it is sold or transferred to third
parties. It is important that users know all the appliance's
operating and safety characteristics.
These hobs have induction systems that comply with the
requirements of EMC standards and with the EMF directive,
and they should not interfere with other electronic devices.
Pacemaker wearers and those using other electronic
implants must consult their doctor or the manufacturer
of the implanted device to assess whether or not it is

Electrical connections must be performed by a trained
technician. Before making the electrical connection,
please read the section on ELECTRICAL CONNECTION.
For appliances with a power supply cable, the terminals
or section of wire between the cable anchor point and the
terminals must be arranged in such a way as to allow the live
Safety information 4
Installation 8
Electrical connection 9
Product description 11
Indicators 11
Control panel 12
Power limitation 13
Functions 14
Cooking Table 16
User menu customization 17
Power Management 18
Cookware guidance 19
Care and cleaning 20
Troubleshooting 21
Hob technical data 23
Energy efficiency of hob 23
Rating plate 24
Environmental aspects 25
IKEA GUARANTEE 25

5 ENGLISH
wires to be pulled out before the earth wire in the event of the
cable coming out of its anchor.
• The manufacturer will not be liable for any damage resulting
from incorrect or inadequate installation.
• Check that the mains power supply corresponds to the
one indicated on the rating plate fixed to the inside of the
product.
• The cut-out devices must be installed in the fixed system
according to wiring system regulations.
• For class I appliances, check that the domestic power supply
guarantees an adequate earthing system.
• Connect the product to the mains using an omnipolar switch.
• If the power cable is damaged, it must be replaced by the
manufacturer, by an authorised service centre or by a
qualified technician, to avoid any risk of danger.
WARNING: Remove the protective films before installing
the appliance.
• Only use the screws and other hardware elements supplied
with the appliance.
WARNING: Failure to install the screws or fixing devices as
described in these instructions may mean there is a risk of
electric shocks.
• Cleaning and maintenance must not be carried out by
children, unless they are under the supervision of an adult.
• Children must be supervised to ensure that they do not play
with the appliance.
• This appliance must not be used by persons (including
children) with limited physical, sensory or mental abilities,
or by inexperienced or untrained persons, unless carefully

6 ENGLISH
supervised and instructed in safe use of the appliance by a
person responsible for their safety.
• This appliance may be used by children over the age of 8
years and by persons with limited physical, sensory or mental
abilities or with insufficient experience and knowledge,
provided they are carefully supervised and instructed on safe
use of the appliance and on the dangers that it involves. Do
not allow children to play with the appliance.
WARNING: The appliance and its accessible parts become
extremely hot during use.
Take great care not to touch the heating elements.
Keep children under 8 years of age well away from the
appliance, unless they are under constant supervision.
WARNING:If the surface shows any signs of cracking, turn the

• Do not turn the device on if the surface is cracked or any
damage is visible in the thickness of the material.
• Do not touch the appliance if your hands or body are wet.
• Do not use steam appliances to clean the product.
• Do not rest metal objects such as knives, forks, spoons
and pan lids on the surface of the hob, as they might
overheat.
•  
not rely on the pan sensors.
WARNING:Unsupervised cooking on a hob using oil and
 
 
 
 

7 ENGLISH
CAUTION:The cooking process must be supervised. A short
cooking process must be constantly supervised.
• The appliance is not designed to be started using an
external timer or a separate remote controlled system.
WARNING:
cooking surfaces.
• The appliance must be installed in such a way as too
allow disconnection from the electrical power supply
with a contact aperture (3 mm) that ensures complete
disconnection in category III overload conditions.
• The appliance must never be exposed to weather (rain,
sun).
• Keep the packing material away from children and
animals.
• Make sure the device is connected directly to the power
outlet.
• Do not use adapters, multiple sockets or extension cables
to connect the device.
• Never use the appliance for purposes other than those for
which it has been designed.
• Deep-fryers must be kept under constant supervision
 
• Do not operate the appliance using an external timer or
separate remote controlled system.
• The appliance must never be installed behind a decorative
door, to prevent it from overheating.
• Do not stand on the appliance, as this may damage it.
• Do not rest hot pots and pans on the edge, as this may
damage the silicone seals.

8 ENGLISH
Installation
Installation process must follow the laws,
ordinances, directives and standards
(electrical safety rules and regulations,
proper recycling in accordance with the
regulations, etc.) in force in the country
of use!
• For further information on the
installation refer to the Assembly
Instruction.
• Do not use silicon sealant between the
appliance and the worktop.
• Make sure that the space underneath
the hob is sufficient for air circulation.
Please refer to the Assembly
Instruction.
• The bottom of the appliance can get
hot. If the appliance is installed above
the drawers, make sure to install a
non-combustible separation panel
under the appliance to prevent access
to the bottom. Please refer to the
Assembly Instruction.
•  
comply with the manufacturer’s
instructions.
• Create a front opening of at least 28
cm2 in the unit into which the hob is
to be fitted, to allow aeration of the
product.
Requirements for kitchen units
• If the appliance is mounted on
 
and regulations relating to low voltage
 
be followed strictly.
•  
(plastic materials and veneered wood)
must be mounted with heat-resistant
 
unsuitable material and adhesives may
result in warping and detachment.
• The use of decorative hardwood
borders around the worktop behind
the appliance is allowed, provided the
minimum distance always complies
with the indications provided in the
installation drawings.
Min.
28 mm
max.
R 5 mm
min.
100mm
55 mm
560+2
mm
490+2
mm
520 mm
580 mm
Min.
28 mm
min.
500mm
• For further information on the
installation refer to the Assembly
Instruction
• If there is no oven beneath the hob,
install a separation panel under the
appliance according to the Assembly
Instruction.

9 ENGLISH
Electrical connection
WARNING: All electrical connections
must be carried out by an authorised
installer.
• Before making the connections, check that
the rated voltage of the appliance indicated
on the respective rating plate corresponds
to the power supply voltage. The rating
 
• Follow the connection diagram (located on
the underside of the hob).
• Only use original components supplied by
the spare parts service.
• The appliance is supplied with a connection
cable.
• If damaged, replace the power supply
cables with the respective original spare
cables. Please contact your local IKEA store
call centre.
Caution! Do not weld any of the cables!
13
Warning Strips
Warning strips show that specialist should do the connecting water, gas and electricity:
The electricity installation
specialist.
The gas installation specialist.
The water installation
specialist.
Electrical connection
• The wire connection has to be done by
specialized technician.
• This appliance has a Type “Y” attachment
and requires at least a power supply cord

  
2,5 mm². External diameter of the supply
    
• This appliance has a Type “Y” attachment
 
  
5x2,5 mm².
• Connection terminals are revealed when the
connection box cover is removed.
• Make sure the characteristics of the
household electrical system (voltage,
maximum power and current) are
compatible with those of the appliance.
• Connect the appliance like shown in the
diagram (in accordance with the mains
voltage and country standard reference).
L = Black
L = Brown
N = Blue
N = Grey
230V 1N
= Yellow / Green
L1 = Brown
L2 = Black
N = Blue
N = Grey
230V 1N
= Yellow / Green
L1 = Brown
L2 = Black
N1 = Blue
N2 = Grey
230V 1N
= Yellow / Green
991 91
-ף -פ -ץ // -ף -פ /פ/ף
991
-
Connection diagram
NL

10 ENGLISH
L1 L2 L3 N1 N2
Insert the shunts between the screws as shown
L = Black
L = Brown
N = Blue
N = Grey
230V 1N
= Yellow / Green
L1 = Brown
L2 = Black
N = Blue
N = Grey
230V 1N
= Yellow / Green
L1 = Brown
L2 = Black
N1 = Blue
N2 = Grey
230V 1N
= Yellow / Green
~ 220V - 240V 1N ~ 220V - 240V 2N ~
123456
L1 L2 N PE L1 N PE L1 L2 N1 PE
123456123456
220V - 240V
220V - 240V
220V - 240V
N2
110
104
Completamente
adesiva
AA-2221697-1
400V 2N ~ 220V - 240V 1N ~ 220V - 240V 2N ~
123456
L1 L2 N PE
220V - 240V
220V - 240V
L1 N PE L1 L2 N1 PE
123456123456
220V - 240V
220V - 240V
220V - 240V
N2
991.0611.984_01
D00006129_00
L1 N PE
L1 L2 N1 PE
123456
123456
220V - 240V
220V - 240V
N2
400V 2N
- 240V 2N ~
123456
L1 L2 N PE
220V - 240V
220V - 240V
L N PE
L1 L2 N1 PE
123456
123456
220V - 240V
220V - 240V
220V - 240V
N2
- 240V 1N ~ 220V - 240V 2N ~
123456
L1 L2 N PE
220V - 240V
220V - 240V
L1 N PE L1 L2 N1 PE
123456123456
220V - 240V
220V - 240V
220V - 240V
N2
1,5 Nm
380V - 415V 2N ~
220V - 240V 2N ~
220V - 240V 1N ~
~ 220V - 240V 1N ~ 220V - 240V 2N ~
123456
L1 L2 N PE L1 N PE L1 L2 N1 PE
123456123456
220V - 240V
220V - 240V
220V - 240V
N2
110
104
Completamente
adesiva
AA-2221697-1
400V 2N ~ 220V - 240V 1N ~ 220V - 240V 2N ~
123456
L1 L2 N PE
220V - 240V
220V - 240V
L1 N PE L1 L2 N1 PE
123456123456
220V - 240V
220V - 240V
220V - 240V
N2
991.0611.984_01
D00006129_00
L1 N PE
L1 L2 N1 PE
123456
123456
220V - 240V
220V - 240V
N2
400V 2N
- 240V 2N ~
123456
L1 L2 N PE
220V - 240V
220V - 240V
L N PE
L1 L2 N1 PE
123456
123456
220V - 240V
220V - 240V
220V - 240V
N2
- 240V 1N ~ 220V - 240V 2N ~
123456
L1 L2 N PE
220V - 240V
220V - 240V
L1 N PE L1 L2 N1 PE
123456123456
220V - 240V
220V - 240V
220V - 240V
N2
1,5 Nm
380V - 415V 2N ~
220V - 240V 2N ~
220V - 240V 1N ~
~ 220V - 240V 1N ~ 220V - 240V 2N ~
123456
L1 L2 N PE L1 N PE L1 L2 N1 PE
123456123456
220V - 240V
220V - 240V
220V - 240V
N2
110
104
Completamente
adesiva
AA-2221697-1
400V 2N ~ 220V - 240V 1N ~ 220V - 240V 2N ~
123456
L1 L2 N PE
220V - 240V
220V - 240V
L1 N PE L1 L2 N1 PE
123456123456
220V - 240V
220V - 240V
220V - 240V
N2
991.0611.984_01
D00006129_00
L1 N PE
L1 L2 N1 PE
123456
123456
220V - 240V
220V - 240V
N2
400V 2N
- 240V 2N ~
123456
L1 L2 N PE
220V - 240V
220V - 240V
L N PE
L1 L2 N1 PE
123456
123456
220V - 240V
220V - 240V
220V - 240V
N2
- 240V 1N ~ 220V - 240V 2N ~
123456
L1 L2 N PE
220V - 240V
220V - 240V
L1 N PE L1 L2 N1 PE
123456123456
220V - 240V
220V - 240V
220V - 240V
N2
1,5 Nm
380V - 415V 2N ~
220V - 240V 2N ~
220V - 240V 1N ~

11 ENGLISH
Product description
Single cooking area (210 x 190 mm) 2100W, with Booster 3000W.
Single cooking area (210 x 190 mm) 2100W, with Booster 3000W.
Single cooking area (200 mm) 2300W, with Booster 3000W.
Single cooking area (145 mm) 1400W, with Booster 1850W.
Control panel
+ Bridge cooking area (210 x 380 mm) 3000W, with Booster 3700W.
Indicators
Pot detection
Each of the cooking areas is equipped with a
system to detect the presence of a pan.
The pan presence detection system
recognises pans with a magnetisable base
suitable for use with induction hobs.
If the pan is removed during operation, or if
an unsuitable pan is used, the display shows
the symbol .
Residual heat indicator
The residual heat indicator is a safety
feature, indicating that the surface of the
cooking area is still at a temperature of
50° C or above, which may cause burns if
touched by a naked hand. The digit for the
corresponding cooking area displays .

12 ENGLISH
1
54
2
8
67 3
1
2 2 33
5
4

1
2
2 33
5
4
Power level indicator
12 2 33
5
4
Timer symbol
12 2 33
5
4
Timer control and cooking time indicator
12 2 33
5
4
Melting function button
1
54
2
8
6
73
Lock function button
1
54
2
8
6
7
3
Pause function button
1
54
2
8
67 3
Scroll keypad
The cooking areas can be activated by pressing the reference digit . The digit lights up more

When a pan is placed on one of the 4 cooking areas, the hob automatically detects its
presence and turns on the corresponding digit to put it into use.
If no pans or other articles are resting on the hob, the digits will not be shown.
On the control panel, the functions that can be selected will always be the ones that are
visible but illuminated at low intensity. Select the functions by touching the symbol itself.
Control panel

13 ENGLISH
Power limitation
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
      
based on the actual abilities and capacity of the power supply itself.
If this is not necessary, the hob can be turned on directly using , otherwise, follow the operations below to
access the menu.
Connect the hob to the domestic mains power
1. All the digits light up for a few seconds, than they go out only the
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7

2. Press and hold the
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
and digits of the zones show .
3. Holding
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
start pressing the zones digitis in anticlock direction, starting from the bottom right.
1
2
4
3
The back right hand digit shows and a number indicating the type of menu. The front right hand digit
shows a number that depends on the parameters indicated in the selection.
Select the digit with and press “ 8 “ on the power bar.
Select the other digit and select the correct setting.

Value on the
power bar Kw Notes
07.4 Kw Standard initial setting
16 Kw
25 Kw
34 Kw
43.5 Kw
53 Kw
62.5 Kw
 .

14 ENGLISH
Functions
Child lock
This function prevents an accidental operation of the appliance.

placed press and hold for 3 seconds one of the 4 digits (not visible) near the dot on the left side.

All the digits display .
The operations described must be completed within 10 seconds.


The operations described must be completed within 10 seconds.
Lock
It is possible to lock the hob functions during use, for example in order to clean the hob. The
   
If there is a power cut, the function is deactivated.

n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
and hold for 1 second.

n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
.
Boost
Each cooking area can be set to an extra power level for 5 minutes at most.
      
corresponding digit displays .
     
Cooking
areas Timer
    
The cooking areas can be programmed individually, as they all have their own Timer.
  
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
to access
the Timer management commands for that area.
The 3 digits will show “ 0 0 0 “. Press “+” or “-” to set the countdown time.
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
Minutes
Hours
Tenths
     
      
by pressing any of the buttons.
If the Timer is active in more than one cooking area the 3 digits will always show the Timer that
  
  
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
to
access the Timer management commands for that area.
Set the three digits to “ 0 0 0 “ using “+” or “-” .
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7

15 ENGLISH
Timer
(generic)
Timer with alarm for generic use.
   
The 3 digits for the Timer management commands show “- - -”.
Press the digit to access the Timer menu and view “ 0 0 0 “.
Press “+” or “-” to set the countdown.
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
Minutes
Hours
Tenths
     
      
by pressing any of the buttons.
Repeat the operations described to modify the countdown value.
   
Press the digit to access the Timer menu and use “+” and “-” to set the Display to “ 0 0 0 “.
Melting
   
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
.
The digit for the selected area will show

n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
or press .
Heat-up
Function
This function is used to heat up a pan at maximum power before continuing to cook at a
selected level. The period of time the cooking area will remain at maximum power depends on
    
Lev. Power Time
148 seconds
2 144 seconds
3230 seconds
4312 seconds
5408 seconds
6120 seconds
7168 seconds
8216 seconds
9not available
Pnot available
To activate, with a pan on the hob and selected cooking area, press and hold for 3 seconds on
the selected value (from 1 to 8) on the power bar. The Display for the corresponding area shows
“ A “ .
It is possible to increase the cooking level, but if it is decreased the function is deactivated.
It can also be deactivated by pressing and holding for 3 seconds the button for the cooking area
in question.
Pause
Function
This function allows any other active function on the hob to be paused/resumed, reducing the
power in the cooking area and all the functions to zero. If the pause function is not deactivated
   
       
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
for at least 1 second. All the Displays show .

n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
     
seconds. The function is deactivated and the hob continues with the previous setting.

16 ENGLISH
Recall
Function
This function is used to recall all the hob function settings in the event of involuntary shut-down or a
sudden power cut.
      , the
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
  
for 6 seconds. Press the button
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
to recover the functions set previously. A beep sounds to
 
Bridge
Function
This function allows 2 cooking areas to be connected, so that they can be controlled as a single,
large cooking area. This means it is possible to use pans with a larger bottom.
The cooking areas that can be selected for this function are only the ones on the left.
   
form a bridge, until a digit displays to indicate that the function has been activated. The other
digit is used to set the power level.
Power level Cooking method To be used for
1 Melting, heating gently Butter, chocolate, gelatine, sauces
2 Melting, heating gently Butter, chocolate, gelatine, sauces
3 Warming up Rice
4Prolonged cooking,
thickening, stewing


5Prolonged cooking,
thickening, stewing


6 Prolonged cooking, braising Pasta, soups, braised meat
7 Light frying Rösti (potato fry-ups), omelettes,
breaded and fried foods, sausages
8 Frying, deep fat frying Meat, potato chips
9Quick frying at high
temperature Steak
P Quick heating Boiling water
Cooking Table

17 ENGLISH
User menu customization
Press .
Press again and hold for 3 seconds.
1. The button
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7

2. Press and hold the
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
and digit of the zone show .
3. Holding
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
start pressing the zones digitis in clock direction, starting from the bottom left.
4
3
1
2
The back left hand digit alternately shows and a number from 2 to 7, indicating the type of menu. The
front left hand digit shows a number that depends on the parameters indicated in the selection.
Select a number on the power bar to access the settings menu and enter a value.

Menu Code Description Value
U2 Menu to manage the button sounds volume.    
U3 Menu to manage the counter buzz volume.    
U4 Menu to manage the display lighting level. 0 (max.) - 9 (min.)
U5 Menu to manage the countdown animation.   
U6 Pan recognition function always active menu. 0 (active) - 1 (not active)
U7 Menu to manage the end of countdown buzzer.
 
 
 
 for 2 seconds.
To exit the menu without saving, press
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
.
If no operations are carried out, the user menu will close after 1 minute.
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7

18 ENGLISH
1
2
3
4
This product is equipped with electronically controlled Power Management. See the
illustration.
This function monitors electric loading and limits the maximum power output to 3700 W for
each cooking area group (1+2 and 3+4), optimizing the power distribution and preventing
the system from overloading.
Hob in full power setting - the function divides the power between cooking areas belonging
to the same group and automatically decreases the power of the other cooking area, if
necessary (the last command has highest priority).
Hob in power limitation setting - the function divides the power between cooking areas and
doesn’t allow to set the power for the other cooking areas exceeding the limit (to increase
the power of particular cooking area, the power setting for the other ones need to be
lowered manually).

If boost level (P) is selected for cooking area 1, cooking area 2 cannot exceed the level 9 at
the same time and will be automatically limited.
Power Management

19 ENGLISH
Cookware guidance
What pots to use
Only use pots and pans with bottom
made from ferromagnetic material
which are suitable for use with

• cast iron
• enamelled steel
• carbon steel
• stainless steel (although not all)
• aluminium with ferromagnetic
coating or ferromagnetic plate
To determine if a pot or pan is suitable,
check for the symbol (usually
stamped on the bottom). You can also
hold a magnet to the bottom. If it clings
to the underside, the cookware will
work on an induction hob.
To ensure optimum efficiency, always
use pots and pans with a flat bottom
that distributes the heat evenly. If the
bottom is uneven, this will affect power
and heat conduction.
How to use
Minimum diameter of pot/pan base for
the different cooking areas
To ensure that the hob functions
properly, the pot must cover one or
more of the reference points indicated
on the surface of the hob, and must be
of a suitable minimum diameter.
Always use the cooking area that best
corresponds to the diameter of the
bottom of the pan.
Empty or thin-based pots/pans
Do not use empty or thin-based pots/
pans on the hob as it will not be able
to monitor the temperature or turn
off automatically if the temperature is
too high, damaging the pan or the hob
surface. If this occurs, do not touch
anything and wait for all components to
cool down.
If an error message appears, refer to
“Troubleshooting”.
Hint/tips
Noise during cooking
When a cooking area is active, it may
hum briefly. This is a characteristic of all
ceramic glass cooking areas and does
not impair the function or life of the
appliance. The noise depends on the
cookware used. If it causes considerable
disturbance, it may help to change the
cookware.
Cooking
area Cookware diameter (mm)
Ø min.
(recommended)
Ø max
(recommended)
Bridge left
side 190 mm 370 mm
Right rear 110 mm 200 mm
Right front 110 mm 145 mm
Left rear 110 mm 190 mm
Left front 110 mm 190 mm

20 ENGLISH
• Never use abrasive sponges, wire wool,
hydrochloric acid or other products
that might scratch or mark the surface.
• Food that falls accidentally or builds
up on the surface, the functional or
aesthetic elements of the Hob must
not be eaten.
•  
from the mains supply before carrying
out any maintenance work.
• Clean the appliance after every use, to
prevent any residual food from burning
on. It is much harder work to remove
crusted and burned-on dirt.
• For day-to-day dirt, use a soft
cloth or sponge and a suitable
detergent. Follow the manufacturer’s
recommendations regarding detergents
to be used. The use of protective
detergents is recommended.
• Remove crusted dirt, for example milk
that has boiled over, using a scraper
pad suitable for vitreous ceramic,
while the cooke-hob is still hot. Follow
the manufacturer’s recommendations
regarding scraper pads to be used.
• Remove food containing sugar, for
example jam that has spilled during
cooking, using a scraper pad suitable
for vitreous ceramic, while the Hob is
still hot. If you do not, the residue may
damage the vitreous ceramic surface.
• Remove any melted plastic using
a scraper pad suitable for vitreous
ceramic, while the Hob is still hot. If
you do not, the residue may damage
the vitreous ceramic surface.
• Remove limescale using a small
amount of limescale remover solution,
for example vinegar or lemon juice,
once the Hob has cooled down. Then
clean again with a damp cloth.
•   
the surface, and do not drop hard
objects onto it. Do not drag pans or
plates over the surface.
• Do not use steam cleaning equipment.
Care and cleaning