IKEA SPANST User manual

SPÄNST

ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
DANSK
ÍSLENSKA
NORSK
SUOMI
SVENSKA
ČESKY
ESPAÑOL
ITALIANO
MAGYAR
POLSKI
EESTI
LATVIEŠU
LIETUVIŲ
PORTUGUÊS
ROMÂNA
SLOVENSKY
БЪЛГАРСКИ
HRVATSKI
ΕΛΛΗΝΙΚΑ
РУССКИЙ
SRPSKI
SLOVENŠČINA
TÜRKÇE
中文
繁中
한국어
日本語
BAHASA INDONESIA
BAHASA MALAYSIA
يبرع
ไทย
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
48
50
52
54
56
58
60
62
64
66
68
70
72
74

General information
Warning!
Any modication of this skateboard can
result in a skateboard that is not safe to
ride.
Age: For ages 14 years and above
Max weight: 100 kg
Use
Use the skateboard only in permitted places,
avoid busy streets and crowded pavements
and follow trafc and pedestrian rules. This
is to prevent accidents or collisions. Skating
on wet, uneven or rough surfaces can cause
falls.
Practice skateboarding safely and always
use protective equipment; helmet, hand/
wrist protection, knee protection, head
protection and elbow protection.
Learn the basic skills of skateboarding,
especially how to stop properly.
The skateboard has no brakes. If you feel
that it starts to go too fast – get off the
skateboard.
Skateboarding is not a quickly or easily
acquired skill. Don’t take chances by
skateboarding faster than your experience
allows. Also ensure that your speed is
safe for the surface you are skateboarding
on and that you don’t endanger other
skateboarders around you.
Before use, check that the skateboard
steering mechanism is correctly adjusted
and that the connective components are
rmly secured.
Maintenance
Keep your skateboard clean and dry and in-
spect it before every ride. Check the board,
truck and wheels, and repair if needed in
order to enhance the durability and safety
of the skateboard.
Keep the skateboard indoors and avoid
keeping it close to heaters/radiators since
temperature changes can make the deck
bend and become skew.
The self-locking nuts and other self-locking
ttings can lose their effectiveness and
should be checked regularly and replaced if
needed.
Keep the bearings clean and lubricate oc-
casionally with suitable grease. Replace the
bearings if they are damaged.
Adjust the steering to your preference by
loosening or tightening the big (kingpin) nut
in the centre of the truck.
Remove any new sharp edges and splin-
ters from the deck after use. Also look for
cracks, since a deck with cracks is not safe
and should be replaced.
Trucks, wheels, bearings, riser/shock pads
and bushings can be replaced. See speci-
cation details below.
WARNING
Skateboarding can be dangerous.
ENGLISH 4

Specications:
Type: Cruiser
Length: 74 cm (29”)
Width: 21 cm (8.25”)
Wheelbase: 40.6 cm (16.0”)
Construction: Resin-9 Birch
Concave: Full
Grip: Split black grip tape
Setup:
Trucks: CA 5.25”
Wheels: 65 mm, 78A
Bearings: ABEC 7 Bearings
Hardware: Philips Head Truck Bolts
Bushings: Hardness HR95A
5
Components:
1. Deck
2. Grip tape
3. 2 x Trucks (axles)
4. 4 x Wheels
5. 8 x Bearings (Ball bearings)
6. Hardware
7. Spacers (metal spacer
between bearings)
8. Riser-/Shock pads
9. Bushings

General information
Warning!
Any modication of this skateboard can
result in a skateboard that is not safe to
ride.
Age: For ages 14 years and above
Max weight: 100 kg
Use
Use the skateboard only in permitted places,
avoid busy streets and crowded pavements
and follow trafc and pedestrian rules. This
is to prevent accidents or collisions. Skating
on wet, uneven or rough surfaces can cause
falls.
Practice skateboarding safely and always
use protective equipment; helmet, hand/
wrist protection, knee protection, head
protection and elbow protection.
Learn the basic skills of skateboarding,
especially how to stop properly.
The skateboard has no brakes. If you feel
that it starts to go too fast – get off the
skateboard.
Skateboarding is not a quickly or easily
acquired skill. Don’t take chances by
skateboarding faster than your experience
allows. Also ensure that your speed is
safe for the surface you are skateboarding
on and that you don’t endanger other
skateboarders around you.
Before use, check that the skateboard
steering mechanism is correctly adjusted
and that the connective components are
rmly secured.
Maintenance
Keep your skateboard clean and dry and in-
spect it before every ride. Check the board,
truck and wheels, and repair if needed in
order to enhance the durability and safety
of the skateboard.
Keep the skateboard indoors and avoid
keeping it close to heaters/radiators since
temperature changes can make the deck
bend and become skew.
The self-locking nuts and other self-locking
ttings can lose their effectiveness and
should be checked regularly and replaced if
needed.
Keep the bearings clean and lubricate oc-
casionally with suitable grease. Replace the
bearings if they are damaged.
Adjust the steering to your preference by
loosening or tightening the big (kingpin) nut
in the centre of the truck.
Remove any new sharp edges and splin-
ters from the deck after use. Also look for
cracks, since a deck with cracks is not safe
and should be replaced.
Trucks, wheels, bearings, riser/shock pads
and bushings can be replaced. See speci-
cation details below.
WARNING
Skateboarding can be dangerous.
DEUTSCH 6

Specications:
Type: Cruiser
Length: 74 cm (29”)
Width: 21 cm (8.25”)
Wheelbase: 40.6 cm (16.0”)
Construction: Resin-9 Birch
Concave: Full
Grip: Split black grip tape
Setup:
Trucks: CA 5.25”
Wheels: 65 mm, 78A
Bearings: ABEC 7 Bearings
Hardware: Philips Head Truck Bolts
Bushings: Hardness HR95A
7
Components:
1. Deck
2. Grip tape
3. 2 x Trucks (axles)
4. 4 x Wheels
5. 8 x Bearings (Ball bearings)
6. Hardware
7. Spacers (metal spacer
between bearings)
8. Riser-/Shock pads
9. Bushings

General information
Warning!
Any modication of this skateboard can
result in a skateboard that is not safe to
ride.
Age: For ages 14 years and above
Max weight: 100 kg
Use
Use the skateboard only in permitted places,
avoid busy streets and crowded pavements
and follow trafc and pedestrian rules. This
is to prevent accidents or collisions. Skating
on wet, uneven or rough surfaces can cause
falls.
Practice skateboarding safely and always
use protective equipment; helmet, hand/
wrist protection, knee protection, head
protection and elbow protection.
Learn the basic skills of skateboarding,
especially how to stop properly.
The skateboard has no brakes. If you feel
that it starts to go too fast – get off the
skateboard.
Skateboarding is not a quickly or easily
acquired skill. Don’t take chances by
skateboarding faster than your experience
allows. Also ensure that your speed is
safe for the surface you are skateboarding
on and that you don’t endanger other
skateboarders around you.
Before use, check that the skateboard
steering mechanism is correctly adjusted
and that the connective components are
rmly secured.
Maintenance
Keep your skateboard clean and dry and in-
spect it before every ride. Check the board,
truck and wheels, and repair if needed in
order to enhance the durability and safety
of the skateboard.
Keep the skateboard indoors and avoid
keeping it close to heaters/radiators since
temperature changes can make the deck
bend and become skew.
The self-locking nuts and other self-locking
ttings can lose their effectiveness and
should be checked regularly and replaced if
needed.
Keep the bearings clean and lubricate oc-
casionally with suitable grease. Replace the
bearings if they are damaged.
Adjust the steering to your preference by
loosening or tightening the big (kingpin) nut
in the centre of the truck.
Remove any new sharp edges and splin-
ters from the deck after use. Also look for
cracks, since a deck with cracks is not safe
and should be replaced.
Trucks, wheels, bearings, riser/shock pads
and bushings can be replaced. See speci-
cation details below.
WARNING
Skateboarding can be dangerous.
FRANÇAIS 8

Specications:
Type: Cruiser
Length: 74 cm (29”)
Width: 21 cm (8.25”)
Wheelbase: 40.6 cm (16.0”)
Construction: Resin-9 Birch
Concave: Full
Grip: Split black grip tape
Setup:
Trucks: CA 5.25”
Wheels: 65 mm, 78A
Bearings: ABEC 7 Bearings
Hardware: Philips Head Truck Bolts
Bushings: Hardness HR95A
9
Components:
1. Deck
2. Grip tape
3. 2 x Trucks (axles)
4. 4 x Wheels
5. 8 x Bearings (Ball bearings)
6. Hardware
7. Spacers (metal spacer
between bearings)
8. Riser-/Shock pads
9. Bushings

General information
Warning!
Any modication of this skateboard can
result in a skateboard that is not safe to
ride.
Age: For ages 14 years and above
Max weight: 100 kg
Use
Use the skateboard only in permitted places,
avoid busy streets and crowded pavements
and follow trafc and pedestrian rules. This
is to prevent accidents or collisions. Skating
on wet, uneven or rough surfaces can cause
falls.
Practice skateboarding safely and always
use protective equipment; helmet, hand/
wrist protection, knee protection, head
protection and elbow protection.
Learn the basic skills of skateboarding,
especially how to stop properly.
The skateboard has no brakes. If you feel
that it starts to go too fast – get off the
skateboard.
Skateboarding is not a quickly or easily
acquired skill. Don’t take chances by
skateboarding faster than your experience
allows. Also ensure that your speed is
safe for the surface you are skateboarding
on and that you don’t endanger other
skateboarders around you.
Before use, check that the skateboard
steering mechanism is correctly adjusted
and that the connective components are
rmly secured.
Maintenance
Keep your skateboard clean and dry and in-
spect it before every ride. Check the board,
truck and wheels, and repair if needed in
order to enhance the durability and safety
of the skateboard.
Keep the skateboard indoors and avoid
keeping it close to heaters/radiators since
temperature changes can make the deck
bend and become skew.
The self-locking nuts and other self-locking
ttings can lose their effectiveness and
should be checked regularly and replaced if
needed.
Keep the bearings clean and lubricate oc-
casionally with suitable grease. Replace the
bearings if they are damaged.
Adjust the steering to your preference by
loosening or tightening the big (kingpin) nut
in the centre of the truck.
Remove any new sharp edges and splin-
ters from the deck after use. Also look for
cracks, since a deck with cracks is not safe
and should be replaced.
Trucks, wheels, bearings, riser/shock pads
and bushings can be replaced. See speci-
cation details below.
WARNING
Skateboarding can be dangerous.
NEDERLANDS 10

Specications:
Type: Cruiser
Length: 74 cm (29”)
Width: 21 cm (8.25”)
Wheelbase: 40.6 cm (16.0”)
Construction: Resin-9 Birch
Concave: Full
Grip: Split black grip tape
Setup:
Trucks: CA 5.25”
Wheels: 65 mm, 78A
Bearings: ABEC 7 Bearings
Hardware: Philips Head Truck Bolts
Bushings: Hardness HR95A
11
Components:
1. Deck
2. Grip tape
3. 2 x Trucks (axles)
4. 4 x Wheels
5. 8 x Bearings (Ball bearings)
6. Hardware
7. Spacers (metal spacer
between bearings)
8. Riser-/Shock pads
9. Bushings

© Inter IKEA Systems B.V. 2017 AA-2028058-1