VStarcam D1 User manual

Smart Doorcam user manual

Lens
LED white light
Doorbell button
Indicator
Buzzer
1 Product description

Picture resolution: 480 × 272
Transmission distance: 30 meters
Image sensor: 1/4 CMOS
Night vision mode: 1pc white light
Lens: 80°, F2.8 aperture
Power supply: 2pcs AAA batteries
Transmission: 2.4G RF
Installation: 3M glue or screw fixed
Alarm: buzzer
Burglar alarm: support

Function key
Indicator
Buzzer

Data sending: WiFi 2.4G
Transmission distance: RF 30 meters + WiFi 30 meters
Data receiving: RF 2.4G
APP：Eye4
Transmission: RF + WiFi
Plug standard: US/EU/UK/AU
Rated voltage: Wide voltage 100V-240V AC
Energy efficiency rating: 6 energy efficiency

①Visit [http://www.eye4.so] for software download and install
②Scan QR code download
2 Software download

3 Register account
APP add indoor unit
4 Add device
①Login APP, click the "+"
button, choose to add "smart
camera doorbell"; follow the
APP prompt instruction, click
Next.
Android / iOS client APP please select “Register now”, click to
enter the registration page, enter user name, password, then confirm
to complete the registration.

Note: If the indicator does not flash at once per second, please
reset the indoor unit.【Reset method: Long press the function
key for 3 ~5s release】

②First time add needs to add the phone connected WiFi name
and password, then enter the next step; APP will find nearby smart
doorcam, custom name click binding will enter the automatic
network configuration status(this process will lasts about 20
seconds), successfully bind doorcam will automatically show in the
APP.

Note: the indoor unit and outdoor unit has been matched
before out of factory, in case of unexpected circumstances
device can not use, please follow the below method to re-
match the two units.
①Long press the indoor unit function keys 10s to enter the waiting
code matching status.
②Press the outdoor unit for 3s to send the code to the indoor unit,
code matching complete.