Ikegami HK-388 User manual

Ultra-wideband Studio/Field Digital CCD Camera System
HK-388
●HK-388 Digital Studio Camera.
●HK-388P Portable companion with performance and functionality equivalent to the HK-388 and
utilizing the BS, MCP and OCP common to the HK-388
●HK-388W 16:9/4:3 Switchable Studio Camera.
●HK-388PW Plug compatible Portable Companion to the HK-388W also with switchable 16:9/4:3
aspect ratio.

●Newly Developed ASICs
Three VLSI (Very Large Scale Integration) chips have
been developed by Ikegami for the digital process,
digital encoder, and data rate converter IC’s. Cutting-
edge VLSI technology with 300,000 gates per chip, 3
volt power, and up to 60MHz sample frequency allows
extended digital functions and performance with the
equivalent power consumption of conventional analog
circuits.
●Video Processing by DSP
A single ASIC provides 16-bit video processing
including functions of flare correction, linear matrix,
gamma correction, detail enhancement,knee, and auto
iris.
The HK-388 with
Full Digital Power
The HK-388 and HK-388P are 12-bit
full digital processing cameras that
combine Ikegami’s vast studio camera
experience with today’s digital
technology.
By incorporating newly developed digital
processing IC’s (ASIC’s), these cameras
achieve consistently high picture quality
and reliability that only digital
processing can deliver.
A 10MHz ultra-wideband component
triax system and a fiber optic digital
transmission system are introduced
together with the HK-388.
Both systems deliver high resolution
pictures even at long cable lengths.
●Digital Encoders
Both camera head and base station incorporate the new
digital encoder ASIC providing highly stable
performance with NTSC encoded outputs available as
standard at the camera as well as base station.
●Standard with Digital Outputs
In addition to the full compliment of analog outputs, the
system comes standard with four component serial
digital (270 Mbps) outputs from the base station. This is
accomplished by the development of a data rate
converter ASIC which changes the digital component
video from CCD sample frequency to D1 sample
frequency. The identical ASIC is used at the camera to
convert the aspect ratio between 4:3 and 16:9 in the
HK-388W and HK-388PW.

●High-Density CCDs
The HK-388 and HK-388P employ high-density 520,000
pixel 2/3-inch FIT CCD image sensors. The HK-388W
and HK-388PW employ newly developed 640,000 pixel
2/3-inch FIT CCDs. And HK-388Wi, employs 640,000
pixel 2/3-inch IT CCDs (switchable 16:9/4:3), and HK-
388PH, employs 640,000 pixel 2/3-inch FIT CCDs (4:3
fixed) are also available. In the studio cameras, the CCD
block is mounted on a bedplate with axis adjustment
assuring perfect optical alignment between zoom lens and
CCD sensor.
●Instant Switching between 4:3 and 16:9
By command from the MCP or from the external system,
the camera will instantly convert between 4:3 and 16:9
aspect ratios. Camera video is converted by digital process
eliminating the need for re-calibration of analog circuits or
re-alignment of optical axis. The viewfinder automatically
follows the switching of the camera video.
●New Level of Wide Screen Performance
The HK-388 and HK-388W, operating in 4:3, have the
same resolution performance. Owing to the 640,000 pixel
CCD, however, the 16:9 performance of the HK-388W
establishes a new higher level of performance with greater
modulation depth and true wide-screen angles-of-view.
●New Super V
The New Super V mode for CCD operation allows the
vertical resolution to be increased in three increments from
400 to 480 TV Lines for frame capture and wide screen
applications, bridging the gap in vertical resolution
between conventional and high definition performance.
●Extended Range Continuous Variable Speed
Shutter
This unique system for FIT CCDs permits variable shutter
operation above and below 1/60 second so the camera
can sync to slow scan or fast scan PC display monitors.
High shutter speeds, including continuously variable mode,
are also available for sports applications.
●Flexible Filter System
Both studio and portable camera types include dual motor
driven 5-position optical filter wheels and electronic color
temperature correction so it is easy to satisfy production
requirements. Daylight color temperature can be corrected
electronically so optical filter positions are available for
combined filter effects.
Combining Top Image Quality
with Production Creativity
The HK-388 and HK-388P deliver high resolution, low noise image quality with a wide
dynamic range and accurate color fidelity.
Due to the extensive use of digital circuits, top image quality is achieved in a consistent
and easy manner.
Also for production creativity, a wide range of state-of-the-art functions can be selected
to enhance the image quality.
●True-to-Life Color Reproduction
The camera is equipped with a digital linear matrix circuit
for accurate colorimetry. For special applications the
standard colorimetry can be changed via six function
remote control of the linear matrix as well as the overall
Color Saturation remote control function.
●Dual Knee System
Both Pre Knee and Digital Knee Circuits are incorporated
to handle a wide dynamic range maintaining faithful color
reproduction. The digital encoder includes Black Stretch
and Black Press to improve reproduction of high and low
contrast scenes.
●Digital Detail Enhancement
Operating in the digital domain the DTL system provides
3-channel enhancement for uniform sharpness of all
colors. It includes conventional as well as new digital
functions not possible in analog DTL systems.
◆ Diagonal DTL
Diagonal DTL derives an edge signal from the diagonal
components of the video signal to enhance resolution.
Not only horizontal and vertical edges are influenced by
the detail signal, but also diagonal edges. This key
function enables the HK-388 to provide a very natural
image impression which can not be obtained with
conventional cameras. With the Diagonal DTL function,
cross-color artifacts are reduced.
◆ Slim DTL
Slim DTL reduces edge thickness without changing the
boost frequency of the edge signal. This permits a fine
edge which will not be attenuated by bandwidth limits in
the path to the home receiver.
◆ Skin DTL
Skin DTL softens the facial complexions of the talent
while retaining the detail in the rest of the scene. The
AHD (Auto Hue Detect) function facilitates Skin DTL
adjustment to select a desired skin tone at the mere
touch of a switch.
◆DTL Boost Frequency
The boost frequency of the horizontal edge signal can
be shifted within the range of 3MHz to 8MHz.
Appropriate edge enhancement can be selected for
different applications and different scenes.
◆DTL B-W Balance
The balance of sharpness between dark and bright areas
can now be controlled by adding the DTL signal to
video both before and after gamma.

● Ultra-Wideband Triax System
A 10MHz ultra-wideband component triax transmission
system permits a maximum distance of 2,100 meters (on
14.5mm diameter triax). Component video transmission
provides an excellent combination of high output
resolution with long cable length capability. It is a proper
match for the component digital output and component
digital studio system.
● Optical Fiber System (option)
Full data rate uncompressed digital transmission is available
utilizing a new hybrid fiber and copper cable. A maximum
length of 2,000 meters (on 9.2mm diameter cable)
powered from the base station is possible.
● RGB Triax System (option)
The studio camera heads can be interfaced to the BS-366
base station, through RGB triax transmission, by mounting
the TIF-86 interface adaptor and TA-366 triax adaptor.
Compatibility can be retained with RGB triax systems
currently in use. In similar fashion, the portable companion
can be fitted with IF-21 interface adaptor and TA-375P or
TA-553 RGB triax adaptors.
●Teleprompter Video / Video Trunk
In addition to Return Video (selectable between RET 1 and
RET 2) for the viewfinder or external monitor, there is a
second video channel from the base station to camera for
teleprompter video. For applications with point-of-view
cameras in the field, the triax system permits the direction
of the second channel to be reversed, providing a video
trunk feed from camera head to base station.
●Full Automatic Set Up
Consistent high quality performance is easily achieved by
using the automatic set up system. Several processes
including Full, Daily Level, and Quick allow the operator to
rapidly align the camera to reference settings. Lens files
are utilized to immediately correct for changes in the
optical path such as the use of a range extender, as well as
changes between different lenses. The lens file can also be
programmed to make corrections for the glass of the
teleprompter mirror.
●Snap Shot Files with Memory Card
The “total look” of the camera can be captured by the
Snap Shot File and stored on a Memory Card. The
Memory Card provides a very secure long term means to
restore camera set up. The Memory Card plugs into the
MCP and has a capacity for 20 Snap Shot Files. In
addition, up to 240 Scene Files can be stored on a single
Memory Card.
●Control Panel System
Total Commitment to
Practical Use
The HK-388 and HK-388P are designed for easy operation in practical applications.
New component triax and fiber cable systems are available together with interface
accessories for existing RGB triax.
Camera operator and video operator facilities are further enhanced over predecessor
models.
The microprocessor control
system for the HK-388
features high speed direct
access panels which can be
configured to best meet the
customer’s requirements.
A typical control
configuration consists of one
OCP Operation Control
Panel for each camera and a
single MCP Maintenance
Control Panel shared by a
system of cameras (up to 40
cameras).
The OCP-388 is available in
joystick and rotary versions.
It provides primary operating
control, and includes new
facilities such as variable
control for skin detail and
master gamma.
The MCP-388 compliments
the OCP with maintenance
and secondary operating
control.
An alternate control
configuration consists of one
CCP Camera Control Panel
for each camera.
The CCP-388 integrates
operating as well as
maintenance control in a
single panel dedicated to one
camera.
MCP-388 Maintenance Control Panel
HK-388P+IF-21+TA-553
OCP-388
(Rotary)
OCP-388
(Joystick)
CCP Camera Control Panel
Operation Control Panel

●Viewfinder Detail
The viewfinder receives full horizontal and vertical detail
enhancement independent of the DTL level set for the
camera output. The VF DTL is set by the camera operator
to satisfy their requirement to find focus easily.
●Viewfinder Character Indicators
In addition to LED indicators, a variety of characters can
be displayed on the viewfinder.
◆ Safe Action
◆ Safe Title
◆ Center Marker
◆ Optical Filter Position
◆ Video Level (zebra pattern)
◆ Auto Setup and Warning Indication
◆ Working Time (hour meter for camera)
●Picture-in-Picture
The PIP (Picture-in-Picture) function permits simultaneous
monitoring of RET video on a small screen window while
viewing the ongoing camera picture on the remaining
viewfinder screen. This feature is standard on the HK-388
and HK-388W.
● New Ergonomic Design for the Portable
Companion
The HK-388P and HK-388PW have a new mechanical
design with lower center-of-gravity for good balance on the
shoulder. The triax connector is mounted with pivot to
provide excellent freedom of movement.
In addition to triax or fiber operation, the HK-388P and
HK-388PW can be docked with a Betacam recorder
utilizing the VA-95SA VTR Adaptor and IF-21 Interface.
● Perfect Match
The portable and studio cameras use the same CCD, same
analog and digital video processing, same optical filters,
and in most cases, the same PC boards, providing an
unparallel similarity in performance and function between
the two camera types.
●Expanded Intercom Facilities
Both studio and portable cameras include 2-channel
intercom each with separate program listen, and with
stereo split selection for dual headset. There is a facility to
remotely switch headset mics OFF when they are
inadvertently left ON. Also, there is the added facility for
production to leave a message for the camera operator to
playback upon return to the camera.
●Compact Base Station
The size of the BS-388 is reduced by 25% compared to
predecessor models. Despite this decrease in size, an
Expansion Slot is provided in the base station for
applications in future upgrades.
●High-Performance Viewfinders
A range of high-performance viewfinders are available for
the studio and portable cameras.
◆7-inch Viewfinder
- Standard for HK-388 and HK-388W, also option for
HK-388P and HK-388PW
◆7-inch Color Viewfinder
- Option for HK-388 and HK-388W
◆1.5-inch Viewfinder
- Standard for HK-388P
◆2-inch Viewfinder
- Standard for HK-388PW
◆6-inch Viewfinder
- Option for HK-388P and HK-388PW
◆5-inch Viewfinder
- Option for HK-388P and HK-388PW
The 7-inch monochrome and color viewfinders attach to
the camera with a mechanism allowing easy panning and
tilting for the viewfinder. As the height of the mechanism
is changed to permit more tilt range, the front to rear
position remains unchanged minimizing the effect to the
overall camera balance.
The 2-inch viewfinder for the HK-388PW provides the
standard viewing size in 4:3 but increases in width to
provide an enlarged viewing size in 16:9, about twice the
screen area as compared to scanning a 1.5-inch viewfinder
in 16:9.
The 6-inch viewfinder for the HK-388P and HK-388PW
includes a cableless, one-touch mount for easy exchange
between tripod and on the shoulder operation.
Right Side Panel
Left Side Panel Rear Panel of TA-388P
BS-388 Front Panel
BS-388 Rear Panel

CONTROL OPERATION SCENE FILE CONTROL
ITEMS OCP MCP/CCP HEAD ✕8RANGE
IRIS  *2OPEN-CLOSE
MASTER PED  *2±20%
LEVEL
BLACK SET R,G,B ±10%
PED R,G,B*1R,G,B ±20%(GAMMA ON)
GAIN R,G,B R,G,B ±6dB
GAMMA MASTER MASTER/R,G,B MASTER *2±5%
BLACK GAMMA R,G,B
FLARE R,G,B*1R,G,B ±5%
WHITE CLIP R,G,B ±5%
WHITE SHADE
H SAW R,G,B ±3%
H PARA R,G,B ±3%
V SAW R,G,B ±3%
V PARA R,G,B ±3%
BLACK SHADE
H SAW R,G,B ±3%
H PARA R,G,B ±3%
V SAW R,G,B ±3%
V PARA R,G,B ±3%
KNEE
MANU POINT R,G,B 70 to 100%
MANU SLOPE R,G,B 0 to 1/6
TOTAL POINT   70 to 100%
TOTAL SLOPE   0 to 1/6
DTL
LEVEL  *2+6 to -9dB
BALANCE 
THRESHOLD  0 to 20%
BOOST FREQUENCY  (3.4 to 6MHz)
NOISE SUP 
B-W BALANCE 
WHITE SUP 
BLACK SUP 
SKIN DTL LEVEL  *2
SKIN DTL R HUE 
SKIN DTL B HUE 
MATRIX R-G,R-B 
G-R,G-B 
B-R,B-G 
COLOR
SATURATION  *2
VARIABLE SHUTTER  *2
VF DTL 
AUTO SETUP FUNCTION
OCP MCP/CCP CAMERA HEAD
LEVEL QUICK AWB ABB FULL LEVEL FULL QUICK AWB ABB FULL LEVEL FULL QUICK AWB ABB
QUICK QUICK
REF EXT EXT EXT EXT
INT/EXT EXT INT/EXT EXT EXT EXT INT/EXT EXT INT/EXT EXT EXT EXT
LEVEL
BLACK SET R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B
PED R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B
GAIN R,G,B R,G,B R,B R,G,B R,G,B R,G,B R,G,B R,B R,G,B R,G,B R,G,B R,G,B R,B
GAMMA R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B
FLARE R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B
WHITE CLIP R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B
KNEE SLOPE R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B
KNEE POINT R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B
AUTO
KNEE SLOPE R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B
KNEE POINT R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B R,G,B
WHITE SHADE
H SAW R,G,B R,G,B
H PARA R,G,B R,G,B
V SAW R,G,B R,G,B
V PARA R,G,B R,G,B
BLACK SHADE
H SAW R,G,B*1R,G,B R,G,B R,G,B*1R,G,B R,G,B R,G,B*1
H PARA R,G,B*1R,G,B R,G,B R,G,B*1R,G,B R,G,B R,G,B*1
V SAW R,G,B*1R,G,B R,G,B R,G,B*1R,G,B R,G,B R,G,B*1
V PARA R,G,B*1R,G,B R,G,B R,G,B*1R,G,B R,G,B R,G,B*1
CAL✕100 R,G,B R,G,B R,G,B R,G,B
(GAIN,PED)
ON/OFF CONTROL LEVEL CONTROL
LENS FILE
AUTO SETUP CONTROL
CONTROL OPERATION SCENE FILE
ITEMS OCP MCP/CCP HEAD ✕8
HEAD POWER ON/OFF CCP only *5
VF POWER ON/OFF *1CCP only*1*1
CAP ON/OFF  *1,4
COLOR BARS ON/OFF  *4
DIASCOPE ON/OFF 
TEST PULSE ON/OFF  *1,4
CAL 100% ON/OFF  *1,4
CAL 200% ON/OFF  *1,4
DTL ON/OFF 
SOFT DTL ON/OFF  *4
SKIN DTL ON/OFF  *4
SLIM ON/OFF  *4
DIAGONAL DTL ON/OFF  *4
AUTO KNEE  *4
KNEE ON/OFF 
COLOR SATURATION CONT ON/OFF  *4
CHROMA ON/OFF 
MATRIX ON/OFF  *4
COLOR TEMP 5600K ON/OFF  *4
FLARE ON/OFF 
WHITE CLIP ON/OFF 
GAMMA SELECT  
MASTER GAIN SELECT  *4
SUPER V SELECT  *4
SHUTTER SPEED SELECT  *4
SHUTTER ON/OFF  *4
BLACK PRESS/STRETCH SELECT  *4
BLACK PRESS/STRETCH ON/OFF  *4
ND/CC FILTER SELECT  
FILTER PRIORITY 
AUTO SETUP-FULL  *2
AUTO SETUP-LEVEL  *2
AUTO SETUP-QUICK  *2
AUTO SETUP-FULL QUICK  *2
AUTO SETUP-AWB 
AUTO SETUP-ABB 
AUTO SETUP-BLACK SHADE  *1
AUTO SKIN HUE DETECT 
SCENE FILE SELECT 
SCENE FILE STORE 
PM/WFM SELECT 
CALL  *5
AUTO IRIS ON/OFF  *1,4
M PED/IRIS ENABLE MCP only
PM IND/PAGE SELECT 
PANEL ENABLE CCP only
CSU /CAMERA SELECT MCP only
MANUAL CLEAR 
MANUAL SET 
WIDE (16:9/4:3) *3*3,4
FILE TRANSFER 
COLOR MATCH CCP only
MEMORY CARD OPERATION 
VARIABLE SHUTTER ON/OFF  *4
ITEMS LENS DIASCOPE EXTENDER-1 EXTENDER-2*
LAVEL
GAIN R,B R,G,B R,B R,B
GAMMA R,G,B R,G,B R,G,B R,G,B
FLARE R,G,B R,G,B R,G,B R,G,B
WHITE SHADE
H SAW R,G,B R,G,B R,G,B R,G,B
H PARA R,G,B R,G,B R,G,B R,G,B
V SAW R,G,B R,G,B R,G,B R,G,B
V PARA R,G,B R,G,B R,G,B R,G,B
*Only HK-388/W
CONTROL
ITEMS
*1 Practice only with Quick switch.
**The control functions marked G (for G-channel), operates only when the camera is set up using diascope(internal chart).
In case of using external chart, set G-channe; to 100% level by IRIS.
*1 Only HK-388/W. *2 Only HK-388P/PW. *3 Only HK-388W/PW. *4 Self-contain use only.
*5 Available for HK-388/W and/or HK-388P/PW with TA-388P.
*1 FLARE or PED. selectable. *2 Self-contain use only.

Cover
Dust Proof
Cover
Rain Proof
Cover
Cold Weather
Cover
Lens
Manual Control
Zoom Lens Prompter
Adaptor
Teleside
Converter
Wide
Attachment
Filter W/Diascope
or
W/O Diascope
Remote Focus
Control Set Remote Zoom Control Set
12Pin
Zoom Lens
Script
Lamp
Case
Camera Carrying Case Soft Carrying Case
VF System
Field Hood
Studio Hood
Carrying Case
Zoom Remote
Control Box
Tripod
Digital Remote Control Cable
1, 2, 5, 10, 30m
TA-388P
Triax Adaptor
Triaxial Cable
max 2100m
Coaxial Cable
max 500m
Headsets
(PROD/ENG)
OCP
CSU
MCP Cable
Max. 30m
Power Cont Cable
Max. 300m
CP Cable
Max 300m
CP Cable Max. 300m
HK-388P/PW
Digital
Remote
Controller
Tripod Mount Plate
BS-388
Base Station
Headset
Coaxial Cable
WFM Cont Cable
MCP
MIC-1
Monitor
Coaxial Cable
AC
Field Hood
Studio Hood
Carrying Case Base Station System-1 (Use for BS-388 and TA-388P/FA-388P)
FA-388P
Fiber Adaptor
Fiber Cable
max 2000m
Coaxial Cable
AC
MCP
VF2-1
(Standard)
VF6-6XU(W)
VF5-6
RM-11
MIC-2
CCP
XVF-874
Attachment
XVF-964
Attachment
XM-154
Mic Holder
(φ21mm)
XM-184
Mic Holder
(φ19mm)
PM
PM
WFM
WFM
AC
VF System
ENC Video (Option)
Field Hood
Studio Hood
Headset
Headset-1 Headset-2
CP Cable
Max. 300m
OCP
MCP or CCP
with Carrying Box
(Option)
Camera Control System-1
Q-TV Video
COAX Cable
Mic-1
Mic-2
Mic
Pedestal / Tripod System
Option
Lens
Servo
Control Manual Control
Sun Cover Rain Cover Cold Cover Dust Cover (OB) Dust Cover (Studio)
Cover
Cam Head
Tripod
Dolly
Pedestal
2/3
" EFP Lens
CCP
MCP Cable Max. 30m
CP Cable Max. 300m
or CP Cable Max. 300m
CP Cable Max. 300m
AC
Camera Control System-2
Script Lamp
Script Holder
Ret Switch Box
(AC 220V Transmission)
HK-388P/PW
Case
Head
Carrying Case Accessory Carrying Case
FA : FIBER Cable Max. 2000m (ø9.2)
TA : TRIAX Cable Max. 2100m (ø14.5)
(AC 220V Transmission)
Monitor
OCP
LEVEL
SPECIALFUNCTION
CCP-377
FILTER
ND CC
HEAD
MONITORSELECT
PM
WFM
TALLY
CALL
AUTO
ALARM
HEADPOWER
LENSEXT
RGBG Y
RGB SEQ Y
12345 ABCDE
- ENC
ENC
PANEL
ENABLE
POWER VF
POWER COLOR MATCH MASTER
BR G MYC
MANCLR
SKIN
DTL
RGB YCM
PED FLARE GAIN
BLACK ENC G.LPHASE
BLACK
SHADE
WHITE
SHADE BLACK
SET GAMMA DTL TOTAL KNEE RGB KNEE
BS
COLORCORR
WHITE
CLIP
SOFT
DTL
VAR.
SHUTTER
CONTROLFUNCTION
MODESWITCH
SPEED PRESS/STRETCH 3
–0 3
+612
GAIN(dB)
%
ON VAR. ON
SHUTTER BLACK
0.4
GAMMA
LHS
SUPERV
C.TEMP
5600K
SOFT SKIN
OFF OFF
AUTO COLOR
CORR COLOR
SAT
CHROMA
OFF OFF
MATRIX
DTL KNEE
BARS CAL
200% FLARE
OFF OFF
WHITE
CLIP
CAP TEST
PULSE CAL 100%
++
OFF0.45 OFF0.35
DIA
SCOPE AWB
AUTOSETUP
QUICK SKIN HUE ABBSTART
FULL COLORLEVEL
MIX/SUP
PM
IND/PAGE
SKIN
KEY
MONISEL CONTROL
SCENEFILE
1 2 4 STORE3
56 87
KNEEPT
DTL SLOPE
MASTERPED GAMMA
GAIN
BLACK
IRIS
LOCAL
REM
BS-388
Base Station
4321
8765
PMIN
4321
8765
WFMIN
87
65
43
21
COMMAND IN
AUXINWFM INPMIN
SYNCOUTWFMOUTPMOUT
WFMREM
MCP-2
C
S
U
M
C
P
AUXINWFM INPMIN
SYNCOUTWFMOUTPMOUT
WFMREM
MCP-1
C
S
U
M
C
P
ACIN
CSU
MODESWITCH
CSUSELECT
12345
12345 678
SPECIALFUNCTION
FILTER
ND CC
HEAD
SCENEFILE
1 2 4STORE
MONITORSELECT
PM
WFM
BR G MYC
MANCLR
TALLYCALL
AUTO
MPED / IRIS
ENABLE
ALARM
MCP-377
MASTERPED
HEADPOWER LENSEXT
IRIS
CAMERASELECT
RGBG Y
RGB SEQ Y
12345 ABCDE
SKIN
DTL
-
RGB YCM
PED FLARE GAIN
BLACK LEVEL ENC G.LPHASE
BLACK
SHADE WHITE SHADE BLACK SET GAMMA DTL TOTAL KNEE RGB KNEE
BS
COLORCORR
ENC
ENC
3
56 8
7
SPEED PRESS/STRETCH 3
–0 3
+612
GAIN(dB)
%
ON VAR. ON
SHUTTER BLACK 0.4
GAMMA
LHS
SUPERV
C.TEMP
5600K
SOFT SKIN
OFF OFF
AUTO COLOR
CORR COLOR SAT
CHROMA
OFF OFF
MATRIX
DTL KNEE
BARS CAL
200% FLARE
OFF OFF
WHITE
CLIP
CAP DIA
SCOPE TEST PULSE CAL 100%
MIX/ SUP
PM
IND/ PAGE
SKIN
KEY
MONISEL CONTROL
AWB
AUTOSETUP
QUICK SKIN
HUE
ABB
START
FULL COLORLEVEL
++
WHITE
CLIP
VAR.
SHUTTER
OFF0.45 OFF0.35
SOFT
DTL
MCP
Headset
COAX Cable 9
" PM
WFM
WFM CONT Cable
Max. 30m
MODESWITCH
VFPOWER
COLOR
MATCH
MASTER PMIND
/PAGE
CAP BARS
DIASCOPE
CAL
COLOR
CORR
C.TEMP
5600K
OCP-377
PANEL
ENABLE
ON VAR.
ON
SHUTTER BLACK GAMMA
GAIN(dB)
1263
+
03
0.35 0.4 0.45OFF
AUTOSETUP
LEVEL COLOR QUICK START AWB ABB
SPEED PRESS/STRETCH
%
SCENEFILE
1234STORE
FILTER
ND
ABCDE
CC
HEAD
5678
MASTER
PED
CALL
TALLY
ALARM
12345
++–
MONITORSELECT
PM
WFM
RGBG Y
RGB SEQ Y
- ENC
ENC
C.SAT GAMMA KNEEPT. SLOPE DTL SKIN
AUTO
KNEE
COLOR
SAT
SKIN
DTL
SOFT
DTL
GAIN
FLARE
AUTO
HEADPOWER
LENSEXT
IRIS
LOCAL
REM
POWER
OFF
MODESWITCH
VFPOWER
COLOR
MATCH
MASTER PMIND
/PAGE
CAP BARS
DIASCOPE
CAL
COLOR
CORR
C.TEMP
5600K
OCP-377
PANEL
ENABLE
ON VAR.
ON
SHUTTER BLACK GAMMA
GAIN(dB)
1263
+
03
0.35 0.4 0.45OFF
AUTOSETUP
LEVEL COLOR QUICK START AWB ABB
SPEED PRESS/STRETCH
%
SCENEFILE
1234STORE
FILTER
ND
ABCDE
CC
HEAD
5678
MASTER
PED
CALL
TALLY
ALARM
12345
++–
MONITORSELECT
PM
WFM
RGBG Y
RGB SEQ Y
- ENC
ENC
C.SAT GAMMA KNEEPT. SLOPE DTL SKIN
AUTO
KNEE
COLOR
SAT
SKIN
DTL
SOFT
DTL
GAIN
FLARE
AUTO
HEADPOWER
LENSEXT
IRIS
LOCAL
REM
POWER
OFF
HK-388/W
7 " Color VF
9 " PM
WFM
System Applications
HK-388
System Applications
HK-388P

●Rating
< Input Signals >
[ HK-388/HK-388W Camera Head ]
External Sync Signal VBS 1Vp-p positive 75Ω
(BBS 0.45Vp-p positive 75Ω)
Mic -60dB~ -40dB/-20dB 600Ω,
2 channels (option)
Intercom -10dB/-50dB, 2 channels (ENG/PROD)
(114B TYPE/XLR TYPE)
Intercom 0dB 600Ω, 4-wire/RTS Extension
[ HK-388P/HK-388PW Camera Head ]
External Sync Signal VBS 1Vp-p positive 75Ω
(BBS 0.45Vp-p positive 75Ω)
Mic -60dB~ -40dB/-20dB 600Ω, 2 channels
Intercom -10dB/-50dB, 2 channels(ENG/PROD)
(114B TYPE/XLR TYPE)
Tally Contact (R tally) (System connector)
[ BS-388 Base Station ]
Analog
External Sync Signal BBS 0.45Vp-p positive 75ΩLoop through
(VBS 1Vp-p positive 75Ω)
Return Video Signal VBS 1Vp-p, positive 75ΩLoop through,
2 channels
Q-TV Signal VBS 1Vp-p positive 75ΩLoop through
Intercom 0dB 600Ω,
2 channels 4-wire/RTS (ENG/PROD)
PGM(Audio) 0dB 10kΩ, 2 channels
Tally R, G, 2 channels, Contact/Power
Digital
Return Video Signal Component serial digital signal (270Mbps)
0.8Vp-p 75Ω(BNC Connector),
2 channels(option)
< Output Signals >
[ HK-388/HK-388W Camera Head ]
Composite Video Signal VBS 1Vp-p positive 75Ω
Q-TV Signal VBS 1Vp-p positive 75Ω
Monitor Signal Menu select signal positive 75Ω
Intercom 0dB, 2 channels (ENG/PROD)
(114B TYPE/XLR TYPE)
Intercom 0dB 600Ω4-wire/RTS Extension
Tally R,G 2 channels, Contact/Voltage
Audio Trunk Signal Through 600Ω(XLR)
Utility Power 200VA
[ HK-388P/HK-388PW Camera Head ]
Composite Video Signal VBS 1Vp-p positive 75Ω(System connector)
Component Signal Y, CB, CR 1kΩ(System connector)
Monitor Signal R+G+B, R, G, B, Y, ENC positive 75Ω
Return Video Signal VBS 1Vp-p positive 75Ω
Intercom 0dB, 2 channels (ENG/PROD)
(114B TYPE/XLR TYPE)
Q-TV signal VBS 1Vp-p positive 75Ω
[ BS-388 Base Station ]
Analog
Composite Signal VBS 1Vp-p positive 75Ω, 3 channels
R, G, B Signal V 0.7Vp-p positive 75Ω (for chroma-key use)
Component Signal Y, CB, CR 75Ω
PM Signal R, G, B, -G, Y, ENC 1Vp-p positive 75Ω,
2 channels
WFM Signal R, G, B, SEQ, Y/C, ENC 1Vp-p positive 75Ω,
2 channels
Sync Signal 2Vp-p negative 75Ω
Specification
WFM Control Signal SEQ ON, STAIR CASE signal
Tally R, G 2 channels, Contact/Voltage
(for video monitor)
Intercom 0dB 600Ω2 channels 4-wire/RTS (ENG/PROD)
Mic 0dB 600Ω, 2 channels
Digital
Component serial digital signal
(270Mbps/SMPTE259M) 0.8Vp-p 75Ω,
4 channels(BNC connector)
Image Sensor HK-388/388P:
2/3-inch 520,000-pixel FIT CCD ✕3
HK-388W/388PW:
2/3-inch 640,000-pixel 16:9 FIT CCD ✕3
Optical System f1.4
Optical Filter12 3 4 5
ND CAP 100% 25% 6.2% 1.6%
CC CROSS 3200K 4300K 6300K 8000K
Gain Selection *Master gain: -3dB/0dB/3dB/6dB/12dB
* R, G, B gain: 6dB
Shutter 1/60 (OFF),
1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000
CVSS: 1/30.3~1/57.6 sec., 1/61.4~1/1966 sec.
Continuously Variable
Power Consumption HK-388(W) camera head: approx. 130VA
HK-388(W) camera head + BS-388:
approx. 270VA
HK-388P(W) camera head:
20.5W (DC+11V~+16V)
Ambient Temperature Camera head: -20°C~+45°C(-4°F~+113°F)
(25%~85% relative humidity)
Base station: 0°C~+45°C(+32°F~+113°F)
(25%~85% relative humidity)
External Dimensions HK-388(W) camera head (including 7”VF) :
W12.2 ✕H16.2 ✕D15.0 inches
(W310 ✕H410.5 ✕D380 mm)
HK-388P(W) camera head + TA-388P
(including 1.5”or 2”VF) :
W4.9 ✕H9.1 ✕D14.8 inches
(W125 ✕H230.5 ✕D375 mm)
BS-388 base station :
W19.0 ✕H5.2 ✕D16.9 inches
(W483 ✕H133 ✕D430 mm)
Weight HK-388(W) camera head: 27 kg (59.5 lbs) approx.
HK-388P(W) camera head: 3.3 kg (7.3 lbs) approx.
(excluding VF and TA)
●Performance
Modulation Depth HK-388/388P:70% or more
(5MHz) HK-388W/388PW:80% (16:9) or more
70% (4:3) or more
Registration 0.02% or less, relative to the screen height
(over the entire screen,excluding lens aberration)
S/N 62dB (gamma, DTL, matrix: OFF ;
band limitation: 4.2MHz)
Sensitivity F8.0 at 2000 lx
Frequency Response (With reference to base station output,
Ych, 100kHz Standard)
60Hz~4.5MHz: within 0.5dB
4.5MHz~8MHz: within 1dB
Gamma Step change over 1.0 (OFF)/0.45/0.40/0.35
Fine adjustment: 0.05 continuously variable
IKEGAMI ELECTRONICS (U.S.A.). INC.
HEADQUARTERS 37 BROOK AVENUE, MAYWOOD, NJ 07607
Phone: [phone] Fax: [phone]
WEST COAST OFFICE 2631 MANHATTAN BEACH BLVD., REDONDO BEACH, CA 90278 Phone: [phone] Fax: [phone]
SOUTHWEST OFFICE 526 BLUEBIRD LANE, RED OAK, TX 75154 Phone: [phone] Fax: [phone]
MIDWEST OFFICE 747 CHURCH ROAD, UNIT C1 ELMHURST, IL 60126 Phone: [phone] Fax: [phone]
SOUTHEAST OFFICE 5200 N.W. 33RD AVENUE, SUITE 111 FORT LAUDERDALE, FL 33309 Phone: [phone] Fax: [phone]
I99B033-SI-F0.5 Printed in Japan
Design and specifications are subject to change without notice.
■URL http://www. ikegami. com