Ikelite 5509.20 User manual

5509.20 Zoom Sleeve (Canon 10-18mm STM)
Instruction Manual
Included n Box
- Zoom Sleeve for Canon 10-18mm STM Lens
A special zoom sleeve for use with the Canon 10-18mm STM lens when
used with the Canon EOS 100D Rebel SL1 in our Compact DSLR Housing.
The full zoom range of the lens is accommodated by the housing's standard
dome port without vignetting (dark shadows in the corners of the image).
Thank you for choosing Ikelite equipment. Please read this instruction
manual completely before attempting to operate or dive with this product.

2
Install ng Zoom Sleeve
1. Install camera body into the housing without the Canon 10-18mm lens.
2. Slide the Zoom Sleeve onto the lens as shown in diagram A.
3 Slide the Zoom Sleeve forward until the front edge aligns with the focus
ring of the camera lens.
4. Insert camera lens through front port opening and align with lens
mounting indicator on the camera body. Rotate lens clockwise until lens
locks into place.
5. Housing port can now be installed and secured as per housing
instructions. The full zoom range of the lens is accommodated by the
housing's standard dome port without vignetting (dark shadows in the
corners of the image).
lens focus ring
Diagram A

3

5509.20_Zoom_Sleeve_2-0115
Return ng Products for Serv ce
Ikelite products may be returned directly to the factory for service. No
advance notice or return authorization is required to obtain service. All
shipments must include a brief cover letter stating your name, shipping
address, email address, telephone phone number, and brief description of
the work request. Please also include a copy of the original purchase
receipt to obtain warranty service.
Send Postage Pre-paid to:
Ikel te Underwater Systems
Attn: Serv ce Department
50 West 33 Street
Ind anapol s, IN 46208 USA
No reimbursements for return freight will be issued.
Return ng Products for Serv ce (outs de the Un ted States)
For the separate international customs documentation form that you
complete to accompany the shipment, please state or designate that the
enclosed products were originally manufactured in the USA and are being
returned to the manufacturer for repair service. alue of the equipment
listed for customs purposes should be zero.
Ikel te Underwater Systems
50 West 33rd Street
Ind anapol s, IN 46208 USA
Ikel te L m ted Warranty
This product is warranted against any manufacturing defects for a period of
one year from the original date of purchase. Defective products should be
returned prepaid to Ikelite. Ikelite will, at its discretion, repair or replace such
products, and will return to customer prepaid. All other claims of any nature
are not covered. Except as mentioned above, no other warranty expressed
or implied, applies to this Ikelite product.
© 2015 Ikelite Underwater Systems