iLive ISB150 User manual

15” Portable Wireless Speaker Sound Bar
User’s Guide for Model ISB150 v2447-01
Controls
Battery Charging
To charge the internal battery, plug the USB charging cable
into the DC Power Input on the speaker and a powered on
computer or USB power adapter (not included) and standard
power outlet. Charging time is approximately 3-4 hours. Battery
life is approximately 10 hours at 50% volume.
When the battery is low a voice will announce“Low Battery,”
then the unit will automatically power OFF.
While the unit is charging it will display a solid red light. When
the battery is fully charged the light will turn o.
Features
• 15” length
• Bluetooth wireless 5.0: range 33 ft.
• Can be used as a True Wireless Stereo system
• Full range speakers
• Built-in microphone
• Voice prompts
• Digital volume control
• Built-in rechargeable battery: approximately 10 hrs
playtime at 50% volume
• Micro-USB port for battery recharge
Includes
• 3.5mm audio cable
• Micro-USB to USB charging cable
Aux In
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the Aux In on the unit
and the
audio output/headphone jack on an audio device.
2. Press Source to switch to Aux Mode.
3. Use the controls on the connected device to select and
play audio. Be sure the volume on your connected device
is audible when you begin playing.
1. Volume/Skip : Short press to adjust the volume level.
Press and hold to skip audio tracks (BLUETOOTH).
2. DC Power Input: Use to charge the internal battery and
power the speaker.
3. Power/ : Press and hold to power ON or OFF. Press
to play or pause tracks (BLUETOOTH). Quickly press the
button 2 times to enter to Pairing Mode.
4. M: Press to change source modes to Bluetooth or Aux.
5. Aux In (3.5mm Audio Input)
6. Indicator LED
1
3
4
2
5
6

Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@
dpiinc.com | Email Parts: [email protected]
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2019 Digital Products
International (DPI, Inc.) All other trademarks
appearing herein are the property of their
respective owners. Specications are subject
to change without notice.
FCC Warnings
WARNING: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
• WARNING: To prevent re or shock hazards, do not expose this
unit to rain or moisture.
• WARNING : Where the mains plug or appliance coupler is used
as the disconnect device, such disconnect device shall remain
readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable
and should be recycled or disposed of according to state and local
guidelines. They should never be disposed of in normal household
waste, and they should never be incinerated, as they might
explode. Contact your local government for disposal or recycling
practices in your area.
Speakerphone
1. To accept a call, press the button, or use the controls
on the connected phone.
2. To end a call, press the button, or use the controls
on the connected phone.
True Wireless Stereo
If you have another ISB150 speaker, you can pair and play the
two speakers together for a surround sound eect, or have two
speakers playing in dierent rooms.
• Press and hold the M button on both speakers to enter
Truly Wireless mode and pair them together.
WARNING: This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This product meets and complies with all Federal
regulations.
Previously Connected Devices
• To manually pair to another device, press the Function
button quickly two times. The speaker will enter pairing
mode and can connect to a new device.
• The speaker can remember multiple Bluetooth devices
and will always try to re-connect to the last device used.
• To re-connect to a dierent device, turn o Bluetooth on
unwanted devices, then access the Bluetooth settings
menu on the device you wish to use and select ISB150.
Troubleshooting
If the speaker should become unpaired or will not connect
normally, follow these steps in your device’s Bluetooth Settings
Menu.
1. Delete the speaker (“Forget This Device”).
2. Turn Bluetooth OFF then ON again, and repeat the
Pairing & Playing Bluetooth Audio steps.
Made
Green
Pairing & Playing Bluetooth Audio
1. When rst powered on, the speaker defaults to Bluetooth
Mode and is ready to pair automatically. When pairing,
remain within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device, select
ISB150 in the Bluetooth Settings to pair. If need be, refer
to the user’s manual for your specic device for more
information.
3. When successfully paired, a voice will announce,
“Bluetooth is connected.”Your Bluetooth device will now
be heard through the speaker.
4. Use the controls on the connected Bluetooth device to
select and play audio. Use the speaker controls or the
connected Bluetooth device to play, pause, and adjust
the volume level.
5. After initial pairing, the speaker will automatically
connect to the last Bluetooth device used whenever it is
in Bluetooth Mode. Note: If your device should become
unpaired or you nd it is unable to connect, quickly press
the button 2 times to enter to Pairing Mode. A voice
will announce,“Bluetooth is connecting,” and you can
connect to the speaker manually.