iLive ISB199 v2352-01 User manual

Control Panel
1. USB Media Port
2. MicroSD Card Media Port
3. DC Power Input: Use to charge the internal
battery and power the speaker.
4. Aux In (3.5mm Audio Input)
5. Power OFF/ON/LIGHTS: Switch to ON to
power the speaker only. Switch to LIGHTS to
power both the speaker and the LED lights.
6. Source : Press to change play mode:
Bluetooth/Aux/FM. Press and hold to pair to a
Bluetooth device.
7. Volume/Skip : Short press to adjust the
volume level. Press and hold to skip audio
tracks (BLUETOOTH/USB/SD) or radio presets
(FM).
8. FM Scan: Press and hold to scan radio
frequencies and save radio stations. Press to
play or pause tracks (BLUETOOTH/USB/SD).
Important Safety Instructions
• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including ampliers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding - type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. When the provided plug does not t into
your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long
periods of time.
• Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
• Use only with a cart, stand, tripod, bracket, or table specied by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
FCC Warnings
Warning: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
Overview
Wireless Tailgate Speaker
User’s Guide for Model ISB199 v2352-01
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings and Precautions
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT, FULLY INSERT.
• Mains plug is used as disconnect device and it should remain readily operable
during intended use. In order to disconnect the apparatus from the mains
completely, the mains plug should be disconnected from the mains socket
outlet completely.
• WARNING: Shock hazard - Do Not Open.
• CAUTION: Use of controls or adjustments or performance of procedures
other than those specied may result in hazardous radiation exposure.
• WARNING: Changes or modications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to operate
the equipment.
• WARNING: Do not place this unit directly onto furniture surfaces with any
type of soft, porous, or sensitive nish. As with any rubber compound made
with oils, the feet could cause marks or staining where the feet reside. We
recommend using a protective barrier such as a cloth or a piece of glass
between the unit and the surface to reduce the risk of damage and/or staining.
• WARNING: Do not ingest battery, chemical burn hazard.
• Battery shall not be exposed to excessive heat such as sunshine, re or the
like.
• Lithium batteries, like all rechargeable batteries, are recyclable and should
be recycled or disposed of according to state and local guidelines. They
should never be disposed of in normal household waste and they should never
be incinerated, as they might explode. Contact your local government for
disposal or recycling practices in your area.
WARNING: To reduce the risk of electric
shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing
to qualied service personnel.
WARNING: This product can expose you to
chemicals including lead, which is known to
the State of California to cause cancer. For
more information go to: www.P65Warnings.
ca.gov This product meets and complies with
all Federal regulations.
ATTENTION
RISQUE D' ÉLECTROCUTION
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user accessible
parts.
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of un-insulated
“dangerous voltage” within the product’s
enclosure that may be of sufcient magnitude
to constitute a risk of electric shock to persons.
Top View Front View
Features
• Bluetooth 5 wireless - range 60 ft.
• Voice prompts announce speaker functions
• Single 3” speaker
• LED color changing lights
• FM radio
• 3.5mm Aux In
• MicroSD card port - supports MP3 le format
and MicroSD cards up to 64GB
• USB port - supports MP3 le format
• Built-in rechargeable battery
• Battery life: approx. 3 hrs playtime at 100%
volume
Includes
• USB cable for battery recharge
1 32 4 5
8
7
6

MicroSD Memory Card
1. Load a MicroSD
memory card into the
MicroSD memory card
port. The speaker will
automatically switch to
SD Card Mode, indicated
by a voice prompt, and
begin playing media on
the card.
2. Use the controls on the
speaker to play, pause,
and skip audio on the card.
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de
apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: par[email protected]
Copyright © 2019 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specications are subject to change without notice.
Customer Support
Protect for Today
Sustain for Tomorrow
Made
Green
Aux In
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm
audio cable to the Aux
In on the unit and the
audio output/
headphone jack on
an audio device.
2. Press Source to switch
to Aux Mode.
3. Use the controls on the
connected device to
select and play audio.
Be sure the volume on
your connected device
is audible when you
begin playing.
USB
1. Load a USB drive
into the USB Media
port. The speaker will
automatically switch to
USB Mode, indicated
by a voice prompt, and
begin playing media on
the drive.
2. Use the controls on the
speaker to select and
play audio from the
connected drive.
FM Radio
Radio Reception
An FM receiver is built into the speaker. Adjust the position of the speaker to
improve FM radio reception.
Radio Tuning and Saving Station Presets
1. Press the Source button to select FM Radio Mode, indicated by a voice
prompt.
2. Press and hold the button to scan and save radio stations automatically.
3. Press and hold the buttons to cycle through saved radio stations.
Charging the Battery
To charge the internal battery, plug the USB charging cable into the DC Power
Input on the speaker and a powered on computer or USB power adapter (not
included) and standard power outlet. Charging time is approximately 2.5 hours.
Battery life is approximately 3 hours. Battery life can be extended by playing at
lower volume levels.
Bluetooth Wireless
Pairing & Playing Audio
When rst powered on, the speaker defaults to Bluetooth Mode, indicated by a
voice prompt. All other play modes will change automatically when connected to
the dierent audio sources.
1. Power on the speaker by adjusting the Power Switch to the ON or LIGHTS
position. The speaker defaults to Bluetooth Mode and is ready to pair
automatically. When pairing, remain within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device, select ISB199 in the Bluetooth
Settings to pair. If need be, refer to the user’s manual for your specic device
for more information.
3. When successfully paired, a voice will announce, “Bluetooth is connected.”
Your Bluetooth device will now be heard through the speaker.
4. Use the controls on the connected Bluetooth device to select and play
audio. Use the speaker controls or the connected Bluetooth device to play,
pause, and adjust the volume level.
5. After initial pairing, the speaker will automatically connect to the last
Bluetooth device used whenever it is in Bluetooth Mode. Note: If your
device should become unpaired or you nd it is unable to connect, press
& hold the button to enter to Pairing Mode. A voice will announce,
“Bluetooth is connecting,” and you can connect to the speaker manually.