iLive ISB212 User manual

Bluetooth Party Speaker
User’s Guide for Model ISB212 v2902-01
Controls
Charging the Battery
To charge the internal battery, plug the USB charging cable
into the DC Power Input on the speaker and a powered on
computer or USB power adapter (not included) and standard
power outlet. Charging time is approximately 5 hours.
When the battery is low a voice will announce“Low
Battery,” then the unit will automatically power OFF after 3-5
minutes.
While the unit is charging the Charge LED will display a
solid red light. When the battery is fully charged the light
will turn o.
Features
• Bluetooth wireless 5.0: range 60 ft.
• Micro SD card port
• USB port
• Built-in rechargeable battery: approximately 4.5 hrs of
playtime at 50% volume with LED lights OFF
• Micro-USB port for battery recharge
Includes
• User’s Guide
• Micro-USB to USB charging cable
1. Mode: Press to change source modes to Bluetooth, USB
or Micro SD/TF.
2. LED Lights: Press to turn LED lights ON. Repeatedly press
to shue through dierent light modes. Quickly press
two times to turn Rhytmic mode ON/OFF. Press and hold
to power turn LED lights OFF.
3. Volume-/Previous: Press to decrease volume level. Press
and hold to play previous track.
4. Play/Pause/Pair: While playing music, press to play/
pause tracks. Press and hold for 3 seconds to pair
Bluetooth device manually.
5. Volume+/Next: Press to increase volume level. Press and
hold to play the next track.
Note: Press and hold both the Volume+ & Volume- buttons at
the same time to turn voice prompts ON/OFF.
3
1 2
54
Inputs
USB Port
Power Switch DC Power Input
Charge
LED
TF/Micro SD

Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@
dpiinc.com | Email Parts: [email protected]
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2022 Digital Products
International (DPI, Inc.) All other trademarks
appearing herein are the property of their
respective owners. Specications are subject
to change without notice..
Additional Warnings
• WARNING: To prevent re or shock hazards, do not expose this
unit to rain or moisture.
• WARNING : Where the mains plug or appliance coupler is used
as the disconnect device, such disconnect device shall remain
readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable
and should be recycled or disposed of according to state and local
guidelines. They should never be disposed of in normal household
waste, and they should never be incinerated, as they might
explode. Contact your local government for disposal or recycling
practices in your area.
WARNING: This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This product meets and complies with required Federal
product guidelines.
Made
Green
1. Load a USB or a Micro SD memory card into the
appropriate media port.
2. The speaker will automatically switch to USB/SD mode.
3. Use the controls on your device to select and play audio
from the connected drive.
USB & TF/Micro SD
TF/Micro SD
USB
Pairing & Playing Bluetooth Audio
1. When rst powered on, the speaker defaults to Bluetooth
Mode and is ready to pair automatically. When pairing,
remain within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device, select
ISB212 in the Bluetooth Settings to pair. If need be, refer
to the user’s manual for your specic device for more
information.
3. When successfully paired, a voice will announce,
“Bluetooth is connected.”Your Bluetooth device will now
be heard through the speaker.
4. Use the controls on the connected Bluetooth device to
select and play audio. Use the speaker controls or the
connected Bluetooth device to play, pause, and adjust
the volume level.
5. After initial pairing, the speaker will automatically
connect to the last Bluetooth device used whenever it is
in Bluetooth Mode. Note: If your device should become
unpaired or you nd it is unable to connect, press and
hold the Play/Pause/Pair button to enter to Pairing
Mode. A voice will announce, “Bluetooth is connecting,”
and you can connect to the speaker manually.