iLive ISB35 User manual

For Warranty Information and the most
up-to-date version of this User’s Guide,
go to: www.iLiveElectronics.com
Website: www.iLiveElectronics.com
Email Support: prodinf[email protected]
Email Parts: [e-mail]
Phone Support: 1-888-999-4215
CONTACT INFORMATION
WARRANTY

To download this User’s Guide in English, Spanish, or French, or to get answers to
frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener
respuestas a preguntas frecuentes, visite la sección de apoyo en:
www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour
obtenir des réponses à des questions fréquemment posées, consultez la rubrique
d’assistance sur: www.iLiveElectronics.com
INTERNATIONAL SUPPORT

LED INDICATORS
STATUS INDICATOR
Low Battery Red Flashing Light
Charging Device Red Solid Light
Full Charge No Light
Pairing Device Blue Flashing Light
Device Paired Blue Solid Light
Aux In Green Solid Light

PAIRING A BLUETOOTH DEVICE
1. Slide the Power Switch to ON.
2. Press and hold the Pair button to begin pairing.
The Pairing Indicator will begin ashing quickly. When pairing, remain within 3 feet
of the unit.
3. Using the controls on your Bluetooth device, scan for and select ISB35 in your
Bluetooth settings to pair. If your device requests a password, enter the default
password 0 0 0 0 .
Refer to the user’s manual for your specic device for instructions on pairing and
connecting Bluetooth devices.
4. When successfully paired, the Pairing Indicator will turn solid and an audible
chime will sound through the speaker.
After initial pairing, the unit will stay paired unless unpaired manually by the user or
erased due to a reset of the device. If your device should become unpaired or you nd
it is unable to connect, repeat the above steps.

PLAYING AUDIO WIRELESSLY
AUX IN
1. Use the controls on the connected device to select an audio track.
2. Audio played through the connected Bluetooth device will now be heard
through the speaker. Use controls on your device to play, pause, skip, and
change the volume.
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the Aux In input on the unit and the
audio output on an audio device.
2. Audio played through the connected device will now be heard through
the speaker. Use controls on your device to play, pause, skip, and change
the volume.

Portable Wireless Speaker with LED Lights
User’s Guide for Model No. ISB35 v1284-01

Warnings and precautions
• Warning:Topreventreorshockhazards,donotexposethisunittorainormoisture.
• Warning: Donotplacethisunitdirectlyontofurnituresurfaceswithanytypeofsoft,
porous,orsensitivenish.Aswithanyrubbercompoundmadewithoils,thefeetcould
causemarksorstainingwherethefeetreside.Werecommendusingaprotectivebarrier
suchasaclothorapieceofglassbetweentheunitandthesurfacetoreducetheriskof
damageand/orstaining.
• Warning: Wherethemainsplugorappliancecouplerisusedasthedisconnectdevice,
suchdisconnectdeviceshallremainreadilyoperable.
• note:Thisdeviceusesaninternalrechargeablelithium-ionbatterythatshouldlastthe
lifetimeofthedevice.Ifyoususpectyourbatterymaybedeadafterseveralattemptsto
charge,pleasecontact1-888-999-4215forsupport.
• Neverdisassembletheunitorattempttoremovethebatteryasthatcouldcauseleakageof
anelectrolyticsubstance.

Fcc Warnings
Warning:Changesormodicationstothisunitnotexpresslyapprovedbytheparty
responsibleforcompliancecouldvoidtheuser’sauthoritytooperatetheequipment.
NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassB
digitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovide
reasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.This
equipmentgenerates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalled
andusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio
communications.However,thereisnoguaranteethatinterferencewillnotoccurina
particularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevision
reception,whichcanbedeterminedbyturningtheequipmentoffandon,theuseris
encouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiver
isconnected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

FEATURES
• Built-in Bluetooth speaker
• Wireless range: 60 feet
• Supports automatic device pairing
• Aux In (3.5mm audio input)
• Micro-USB port for battery recharge
• Color-changing LED lights with auto
and manual color-changing modes
• DC battery power: built-in
rechargeable lithium ion battery
• Battery life:
approx. 3 hours
• Micro-USB to USB cable
INCLUDES

OVERVIEW
Pairing/Aux In Indicator
LED Light Strip
Charge Indicator
Side View
Aux In (3.5mm audio input)
Micro-USB Charging Port

Lights
Press once to power lights on.
Press again to pause.
Press and hold to power lights o.
Note: Powering o the lights does not power o the unit.
OVERVIEW
Bottom View
Power OFF/ON
Pair Bluetooth

CHARGING THE BATTERY
Requires a Micro-USB to USB cable (included).
Note: Be sure the computer is not in sleep mode.
1. Using a Micro-USB to USB cable (included), connect the larger USB plug to the
USB port of a powered on computer or USB power adaptor.
2. Connect the smaller Micro-USB plug into the Micro-USB port of the unit.
The unit will now charge.