iLive ILED75-1262-01 User manual

FCC Warnings
• Warning:Changesormodicationstothisunitnot
expresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser’sauthoritytooperatethe
equipment.
NOTE:Thisequipmenthasbeentestedandfoundtocomply
withthelimitsforaClassBdigitaldevice,pursuanttoPart
15oftheFCCRules.Theselimitsaredesignedtoprovide
reasonableprotectionagainstharmfulinterferenceina
residentialinstallation.Thisequipmentgenerates,uses,
andcanradiateradiofrequencyenergyand,ifnotinstalled
andusedinaccordancewiththeinstructions,maycause
harmfulinterferencetoradiocommunications.However,
thereisnoguaranteethatinterferencewillnotoccurina
particularinstallation.Ifthisequipmentdoescauseharmful
interferencetoradioortelevisionreception,whichcanbe
determinedbyturningtheequipmentoffandon,theuseris
encouragedtotrytocorrecttheinterferencebyoneormore
ofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentand
receiver.
• Connecttheequipmentintoanoutletonacircuit
differentfromthattowhichthereceiverisconnected.
• Consultthedealeroranexperiencedradio/TVtechnician
forhelp.

Warnings and preCautions
• WARNING:Topreventreorshockhazards,donot
exposethisunittorainormoisture.
• WARNING:Wherethemainsplugorappliancecoupler
isusedasthedisconnectdevice,suchdisconnectdevice
shallremainreadilyoperable.

To download this User’s Guide in English,
Spanish, or French, or to get answers to
frequently asked questions, visit the support
section at: www.iLiveElectronics.com.
Para descargar este Manual del Usuario en
Inglés, Español y Francés, o para obtener
respuestas a preguntas frecuentes, visite la
sección de apoyo en:
www.iLiveElectronics.com.
Pour télécharger ce guide de l’utilisateur en
Anglais, Espagnol ou Français, ou pour obtenir
des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com.
International Support

Website: www.iLiveElectronics.com
Email Support: prodinf[email protected]om
Email Parts: [e-mail]
Phone Support: 1-888-999-4215
Contact Information
For Warranty Information and the most
up-to-date version of this User’s Guide, go to:
www.iLiveElectronics.com.
Warranty
Specicationsaresubjecttochangewithoutnotice.
Copyright©2015DigitalProductsInternational(DPI,Inc.)
Allothertrademarksappearinghereinaretheproperty
oftheirrespectiveowners.

Wireless Speaker + LED Lightbulb
User’s Guide for Model No. ILED75-1262-01

Features
• Supports Bluetooth
• Supports prole A2DP (Advanced Audio
Distribution Prole)
• Wireless range: 60 feet
• LED light bulb with eects
• Color-changing lights with auto and
manual color-changing modes
• Built-in speaker
• Brightness: 165 lumens
• Color temperature: 5300K
• Standard light socket size E26
• AC input: 110V - 240V
• Remote control: requires a CR2025 battery
(pre-installed)
Includes

Unit Overview
LED Light
Internal
Speaker
Plug

Remote
Green
White
Play/Pause
Cycle Lights
Note: Remote IR signal range is 20-23 ft (6-7 m).
Purple
Pair
OFF
Orange Dark Blue
Light BlueYellow

Remote Batteries
Remote control requires one CR2025 coin/button
cell battery (included).

Pairing a Bluetooth Device
When pairing, remain within 3 feet of the unit.
1. Press the Pair button on the remote.
The light will begin ashing blue.
2. Using the controls on your Bluetooth
device, scan for and select ILED75 in your
Bluetooth settings to pair. If your device
requests a password, enter the default
password 0 0 0 0 . Refer to the user’s manual
for your specic device for instructions on
pairing and connecting Bluetooth devices.
3. When successfully paired, the light will
switch to solid blue, then resume the last
light mode.
4. Use the Play/Pause button on the remote
or your Bluetooth device to play or pause
an audio track.
If your device should become unpaired or
you nd it is unable to connect, repeat the
above steps.