IMC Networks MiniMc User manual

MiniMc™is a 10/100 auto-negotiating, miniature
media converter. The fiber port always operates
at 100 Mbps FDX; the copper port auto-senses the
connected device’s speed and duplex mode:
10 Mbps or 100 Mbps and HDX or FDX (including
Flow Control).
feature which
automatically selects between a crossover work-
station or pass-through repeater hub connection
depending on the connected device. also
protects against Broadcast storms, and allows
jumbo packets of up to 1916 bytes.
AutoCross
MiniMc
MiniMc PowerTray/18installs in an IMC Networks
(refer to its hardware manual for installation instruc-
tions) or as a standalone converter. As a standalone,
uses either a universal, external switching
a USB connector to connect to
PC/laptops, self-powered hubs and high-powered
hubs.
MiniMc offers plug-and-play
operation, including the
MiniMc
power cube with 100 - 240 ±10% VAC input and
5V DC output, or
MiniMc
Installation Guide
+5V (±5%)
GRND ØV
© 2003-2005 IMC Networks. All rights reserved.
The information in this document is subject to change without notice. IMC Networks
assumes no responsibility for any errors that may appear in this document. is a
trademark of IMC Networks. Other brands or product names may be trademarks and are
the property of their respective companies.
MiniMc
Document Number: 55-80632-00 A2 August 2005
NOTE: Use only the supplied IMC Networks power supply or
USB cable with this product. Using a non-IMC Networks
power source will void the warranty. For warranty details and
additional information please visit us online at:
www.imcnetworks.com/warranty.cfm
LED Operation
IMC Networks Technical Support
Specifications
Each includes two LEDs, located on the
RJ-45 connector. LED functions are as follows:
Glows green when a link is
established on the fiber port; blinks green
when activity is detected on the fiber port.
Glows Green when a link is
established on the copper port; blinks green
when activity is detected on the copper port.
Phone:
[phone] or [phone] (US/Canada)
[phone] (Europe)
Fax: [phone]
E-mail: [email protected]
Web: www.imcnetworks.com
MiniMc
FX LNK/ACT:
TX LNK/ACT:
Operating Temperature:
Storage Temperature:
Humidity:
Power Consumption (Typical):
Power:
32° to 122°F (0° to +50°C)
-13° to +158°F (-25° to +70°C)
5% to 90% (non-condensing), 0 – 10,000 ft. altitude
500mA
100/240 ±10% VAC input, 5VDC output