IMC Networks iMcV-T1 User manual

800-624-1070
www.imcnetworks.com
RoHS Compliant
The iMcV-T1/E1/J1 modules are physical layer devices that
convert twisted pair to fiber and operate at a switch-selectable
protocol rate of T1 (1.544), E1 (2.048) and the Japanese J1
(1.544). The iMcV-T1/E1/J1 modules offer more fiber choices
and distances because they are engineered to the industry
standard 8B/10B PHY encoding.
Available with remote management via the fiber port, the
SNMP-manageable iMcV-T1/E1/J1 enables network managers
to conduct loopback testing, and monitor and manage units
located up to 100 km away at a remote location.
Full bit rate for customer traffic
Since IMC Networks’ management technology functions
transparently to the frame format, customers will not experience
overhead or loss of a data channel typically associated with
remote management or SNMP polling. Customer traffic will
always be full bit rate: 1.544 Mbps or 2.048 Mbps.
iMcV-T1/E1/J1 products include:
• A line integrity test feature
• Three modes of operation for loopback testing (local,
remote and analog loopback)
• The Transmit Data Source diagnostic feature which
sends specific patterns of data (transmit all unframed
ones; transmit a pattern of zeros, and ones and transmit
a Pseudorandom Bit Sequence (PRBS) to determine
problems with the cable.
Configure all test modes remotely via iView² SNMP software
or locally by manually setting DIP Switches on the units. In
addition, iMcV-T1/E1/J1 also includes an internal elastic buffer
to remove jitter from transmitted data.
Switch Selectable Protocol
• Operates at T1 (1.544), E1 (2.048)
and J1 (1.544) protocols
Remote management
• Conduct loopback tests,
• Monitor/manage units via GUI-Based
iView²
• Full bit rate for customer traffic
Easy to configure and manage with
GUI-based iView²
• Up and running in less than five minutes
• Easily adjust settings when user
requirements change
• Easy upgrades; no user intervention or
visits to remote locations required
• Monitor and control all connections
Supports more fiber choices
• Available for multi-mode or single-mode
fiber
• Single-strand fiber versions
• Supports very long fiber distances
Eases Troubleshooting
• Three loopback testing modes, plus
SNMP management and LEDs assist
in diagnosing problems on fiber optic
networks
iMcV-T1/E1/J1
Telco Converter Switch Remote Management
iMcV-T1/E1/J1 products are ideal for extending PBX or legacy Telco circuits
over fiber optics in the local loop and long-haul applications.
Application Example
iMcV-T1/E1/J1 media converters
allow users to link two PBXs, CSUs
or routers and extend the distance
between the two over fiber.
T1/E1/J1
* Module shown in MediaChassis/1-AC, sold separately

DS-iMcV-T1E1-1010
Copyright © 2010 IMC Networks. All rights
reserved. The information in this document is
subject to change without notice. IMC Networks
assumes no responsibility for any errors that may
appear in this document. Specific product names
may be trademarks or registered trademarks and
are the property of their respective companies.
IMC Networks
Fiber Consulting Services
For information call:
TEL: [phone]
1-800-624-1070 (US/CAN)
[phone] (Europe)
[email protected]
IMC Networks
Headquarters
19772 Pauling
Foothill Ranch, CA 92610
TEL: [phone]
FAX: [phone]
[email protected]
IMC Networks
Europe
Herseltsesteenweg 268
B-3200 Aarschot, Belgium
TEL: [phone]
FAX: [phone]
[email protected]
IMC Networks
Eastern US/Latin America
28050 U.S. Hwy. 19 North, Suite 306
Clearwater, FL 33761
TEL: [phone]
FAX: [phone]
[email protected]
• Protocol-Selectable — Operates at T1/J1 (1.544) and E1 (2.048) protocols
• Includes ability to manage remote unit
• Conduct three types of loopback tests
• Full bit rate for customer traffic
• EGL, Transmit Data Source, Line Encoding and NRZ
• Includes DTE/DCE switch on converter
• Features LinkLoss and FiberAlert
• Installs in any iMediaChassis serues or MediaChassis series
• Supports GUI-Based iView²
• 50/125µm or 62.5/125µm multi-mode fiber
• 9/125µm single-mode fiber
• Available for single-strand fiber
• Connectors: RJ-48 and ST or SC
• Includes diagnostic LEDs
• Includes hot-swappable architecture
Regulatory Approvals:
• FCC Class A
• UL/cUL
• CSA
• CE
Shipping Weight:
0.30 lbs (.11 kg)
Operating Temperature:
+32° to +122° F (0° to +50° C); 5% to 95% (non-condensing), 0 – 10,000 ft. altitude
Storage Temperature:
-13° to +158° F (-25° to +70° C); 5% to 95% (non-condensing)
Ordering Information
Technical Specifications
*These products have single-strand fiber technology.
For more information go to: www.imcnetworks.com/products/SSFX.cfm
Fiber Optics Specifications
For each product listed below in the Ordering Information section, the DISTANCE represents an approximate fiber distance based on industry-standard
fiber attenuation specifications. Actual distances will vary for each installation. For complete power budgets and information on calculating specific
distances, visit www.imcnetworks.com/go/fcs or contact IMC Networks Fiber Consulting Services at 949-465-3000.
PART NUMBER DESCRIPTION DISTANCE
iMcV-T1/E1/J1 Module
850-14198 iMcV-T1/E1/J1,TP/Fiber-MM850-ST 2 km
850-14199 iMcV-T1/E1/J1,TP/Fiber-MM850-SC 2 km
850-14200 iMcV-T1/E1/J1, TP/Fiber-MM1300-ST 5 km
850-14201 iMcV-T1/E1/J1, TP/Fiber-MM1300-SC 5 km
850-14202 iMcV-T1/E1/J1, TP/Fiber-SM1310/PLUS-ST 40 km
850-14203 iMcV-T1/E1/J1, TP/Fiber-SM1310/PLUS-SC 40 km
850-14204 iMcV-T1/E1/J1, TP/Fiber-SM1310/LONG-ST 80 km
850-14205 iMcV-T1/E1/J1, TP/Fiber-SM1310/LONG-SC 80 km
850-14206 iMcV-T1/E1/J1, TP/Fiber-SM1550/LONG-SC 80 km
iMcV-T1/E1/J1 Single-Strand Fiber Module*
850-14288 iMcV-T1/E1/J1, TP/SSFiber, MM1310-SC 2 km
850-14289 iMcV-T1/E1/J1, TP/SSFiber, MM1550-SC 2 km
850-14290 iMcV-T1/E1/J1, TP/SSFiber-SM1310-SC 20 km
850-14291 iMcV-T1/E1/J1, TP/SSFiber-SM1550-SC 20 km
850-14292 iMcV-T1/E1/J1, TP/SSFiber-SM1310/PLUS-SC 40 km
850-14293 iMcV-T1/E1/J1, TP/SSFiber-SM1550/PLUS-SC 40 km
850-14294 iMcV-T1/E1/J1, TP/SSFiber-SM1310/LONG-SC 60 km
850-14295 iMcV-T1/E1/J1, TP/SSFiber-SM1550/LONG-SC 60 km
Always deploy iMcV-T1/E1/J1 converters in pairs.
PART NUMBER DESCRIPTION DISTANCE
iMcV-T1/E1/J1 CWDM Fiber Module
850-14271 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1310-SC 80 km
850-14272 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1330-SC 80 km
850-14273 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1350-SC 80 km
850-14277 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1370-SC 80 km
850-14278 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1390-SC 80 km
850-14279 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1410-SC 80 km
850-14281 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1430-SC 80 km
850-14283 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1450-SC 80 km
850-14284 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1470-SC 80 km
850-14285 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1490-SC 80 km
850-14286 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1510-SC 80 km
850-14287 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1530-SC 80 km
850-14296 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1550-SC 80 km
850-14297 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1570-SC 80 km
850-14298 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1590-SC 80 km
850-14299 iMcV-T1/E1/J1, TP/Fiber-CWDM-SM1610-SC 80 km