impey SlimFold User manual

SlimFold & HorseshoeShower Seat Installation Guide
SlimFold Bench Installation Guide
SlimFold Shower Bench
SlimFold Shower Seat
Issue 3
04/05/18
Page 1
see pages 3 and 4
see pages 5 and 6

Horseshoe Shower Seat
Page 2
see pages 5 and 6

80
160
120
846
500
157
98
60
415
This line indicates the
height of the seat when
folded down
These markings indicate
the wall mount hole
positions
Bench assembly
Cover plate
120
160
80
500
844
157
427
110
60
These markings indicate
the wall mount hole
positions
This line indicates the
height of the seat when
folded down
Bench assembly
Cover plate
SlimFold Shower Bench Installation Guide
Diagram 1. SlimFold shower bench mounting hole positions.
Refer to this diagram if further clarification of dimensions is required.
Page 3
Horseshoe Shower Bench Installation Guide

1. Determine the desired position of the
shower seat.
Do not discard packaging as it will be
used as a drilling template in step 2.
2. Using the drilling template (printed on
the box), mark the position of all six
holes onto the wall. Make sure the
template is at the desired height
above the floor and level.
3. Select an appropriate fixing type for
your wall, and drill the marked holes.
Refer to Fixing Guide for advice on
wall types and fixings.
SlimFold Shower Bench Installation Guide
Before starting: This product must be fitted by a
competent person. Additional wall reinforcement may be
necessary, depending on its condition and construction.
4. With the cover removed, secure the
seat assembly to the wall through the six
mounting holes.
8. Once the wall mount is securely fixed,
clip the cover plate on.
Important: The bench will be supplied
with the cover plate not fitted. Do not fit
the cover plate until the bench is fully
mounted to the wall. Once snapped in
place it will be difficult to remove.
Page 4

80
160
120
60
432
276
654
500
943
157
98
216
60
415
These markings indicate wall
mount hole positions
These markings indicate
arm rest bracket mounting
hole positions
Backrest assembly
Bench assembly
Cover plate
Arm rest brackets
120
500
844
427
110
60
These markings indicate the
wall mount hole positions
SlimFold Shower Seat Installation Guide
Page 5
Diagram 2. SlimFold shower seat mounting hole positions.
Refer to this diagram if further clarification of dimensions is required.
This line indicates the height
of the seat when folded down

1. Determine the desired position of the
shower seat.
Do not discard packaging as it will be
used as a drilling template in step 2.
2. Using the drilling template (printed on
the box), mark the position of all ten
holes onto the wall. Make sure the
template is at the desired height
above the floor and level.
3. Select an appropriate fixing type for
your wall, and drill the marked holes.
Refer to Fixing Guide for advice on
wall types and fixings.
4. Fix the two arm rest brackets to the
wall. Ensure the hook shape is on the
outside.
5. Place the back rest assembly onto the
arm rest brackets as shown...
6. Hook the arm rest cross-bar into
brackets. Note: backrest not shown
for illustration purposes.
SlimFold Shower Seat Installation Guide
Before starting: This product must be fitted by a
competent person. Additional wall reinforcement may be
necessary, depending on its condition and construction.
7. With the cover removed, secure the
seat assembly to the wall through the
six mounting holes. Note: Fixings will
pass through the backrest and into
the wall.
8. Once the wall mount and backrest is
securely fixed, clip the cover plate on.
Important: The bench will be supplied
with the cover plate not fitted. Do not fit
the cover plate until the bench is fully
mounted to the wall. Once snapped in place
it will be difficult to remove.
Page 6

SlimFold Shower Bench Installation Guide
Please read these installation instructions carefully. Incorrect fitting will invalidate the guarantee. After the installation please
retain these instructions for the end user.
Safety
Make sure there are no hidden pipes or cables where you intend to drill. •
Wear safety goggles, shoes and appropriate clothing. •
If you require assistance selecting the correct fixing for this product please see fixing guide supplied or contact •
a fixings specialist for more advice.
If you are unsure about any part of the installation, please contact our technical department on 01460 258682 •
General Care
Clean immediately after use to stop a build up of dirt and scale. Leaving soap/shampoo pools can cause permanent stains. •
To clean, use warm soapy water or water containing a small amount of washing up liquid and rinse off with clean water. •
Occasional use of a mild bathroom limescale remover is acceptable. •
Do not use bleach, scouring powders, solvents or aggressive cleaning agents. •
Minor scratches and abrasions can be polished out with a mild polishing compound. •
Page 7

Impey Showers
Conquest Business Park
Ilton
Somerset
TA19 9EA
TEL: [phone]
FAX: [phone]
[email protected]
www.impeyshowers.com
If you require any further information about
this product please contact our technical
department on: 01460 258 682