Inaxsys IN-84POE User manual

8272 Pascal Gagnon Saint-Leonard, Quebec, Canada H1P 1Y4 www.inaxsys.com
FCC Warning Package Contents Front Panel (LEDs)
IN-84POE
User
Manual
8 Port Fast
Ethernet
with 4 PSE PoE Switch
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is
operated in a commercial environment.
This equipment generates
and radiates radio frequency energy and,
if not installed and used in accordance with
the user manual, it may cause interference
in which case users will be required to
correct interference at their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may
be required to take adequate measures.
Introduction
This switch provides 8 10/100M ports. It was
designed for easy installation and high
performance in an environment where traffic
is on the network and the number of users
increases continuously.
It consists of 4 PSE/PoE ports. That can solve
the limitation of the power outlet location and
offer the system designer a flexible solution to
locate the network device everywhere.
The compact rigid desktop size was
specifically designed for small to medium
workgroups. It can be installed where space
is limited; moreover, it provides smooth
network migration and easy upgrade to
network capacity.
Before you start the installation of the switch,
please verify that your package contains the
following items:
One PoE Fast Ethernet Switch
One Power Cord
One User Manual
Rack-mount Kit
Note: If any of these items is found missing or
damaged, please contact your local supplier
for replacement.
Key Features
8 Port 10/100M Nway (Auto-negotiation)
Switch
4 PSE/PoE function ports
Supporting the power Max. 15.4 W for each
PSE/PoE port
11”Desktop size with metal case
Can be installed in a 19” cabinet by
rack-mount kits
Auto-learn of networking configurations
Auto-detect full/half-duplex modes for any
port
Dedicated full-duplex 200Mbps bandwidth
Store-and-Forward switching methods
IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
Non-blocking & Non-head-of-line blocking
full wire speed forwarding
Auto-MDI/MDI-X function for any port
Smart plug & play
LED Indicators of 8 Port with 4 Port
PoE 10/100M Switch
LED
Status
Description
Power
On
Power is on.
Off
Power is off.
LINK/ACT
On
Port is for connection.
Off
No connection.
Flashing
Data is transmitting or
receiving
PoE
On
Port is linked to Power
Device
Off
No Power Device is
connected
Connections
Switch/Hub to this 8 Port with 4 Port
PoE Fast Ethernet Switch
This switch provides automatic crossover
detection functionality for any port. It is
simple and friendly to up-link to another switch
without crossover cable.

8272 Pascal Gagnon Saint-Leonard, Quebec, Canada H1P 1Y4 www.inaxsys.com
Standards
IEEE 802.3af
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x Flow
control
Features
Number of Ports: 8
10/100BaseT(X) with 4
PSE/PoE Ports
MAC Address: 4K
Buffer Memory: 1.625M
bits
Method: Store and
Forward
Filtering/
Forwarding
Rates
100Mbps port –
148,800pps
10Mbps –14,880pps
Transmission
Media
10BaseT Cat. 3, 4, 5
UTP/STP
100BaseTX Cat. 5
UTP/STP
LED Indicators
Per Port: LINK/ACT,
PoE ACT/Status
Per Unit: Power
Power Input
100~240V/AC,
50~60Hz
Power Output
48V/DC Per Port Output –
15.4 W Max Per Port
4 Ports at Full 15.4 W
Output Supported
Power
Consumption
130 Watts (Max)
Dimensions
266 × 160 × 44 mm
(L x W x H)
Weight
1.6 kg
Operating
Temperature
0 to 45℃
Storage
Temperature
-20 to 90℃
Humidity
10 to 90% RH
(non-condensing)
Certifications
FCC Class A, CE
PC/Other devices to this 8 Port with 4
Port PoE Fast Ethernet Switch
Via a twisted pair cable straight through, this
switch can be connected to PCs, servers and
other network devices.
Power Device to this 8 Port with 4 Port
PoE Fast Ethernet Switch and getting
48V power source through Cat. 5
cables
Using Cat. 5 twisted-pair cable to connect
Power Device to the port 1~4 of this
switch, and then this switch will supply 48V
power to Power Device over Cat. 5 twisted-
pair cable. Please be noted Power Device
should also comply with IEEE 802.3af.
Rear Panel (Power)
AC input
AC input (100~240V/AC, 50~60Hz) UL
Safety
Technical Specifications