InCharg MOD-1452 Manual

© 2023 Order #XXXXX
Completed Assembly
Underside View
Base
Bolt
Black
Bolt
Table Top
Post
Steps:
1) Connect base to post, using bolt.
2) Route cord from table top through post and base.
3) Connect table top to post, with fixed brackets, using black bolts.
SETUP INSTRUCTIONS
MOD-1452 Wireless Charging Table

© 2023 Order #XXXXX
DO NOT USE POWER TOOLS
ALL CONNECTIONS MUST
BE TIGHTLY SECURED
Part Identification - Numbering
Spline Connection Base Plate & Extrusion Connection
WARNING
7A
Hex Tool - Essential for Assembly
Extrusion & Lock Connection Engaged Lock
LADDERS OR LIFTS
MAY BE REQUIRED
General Setup Instructions
• Read entire setup instruction manual prior
to unpacking parts and pieces.
• The setup instructions are created
specifically for this configuration.
• Setup instructions are laid out sequentially
in steps, including exploded views with
detailed explanation for assembly.
Cleaning & Packing
• For Cleaning Metal, Plex, & Laminate
Parts: Use a MILD NON-ABRASIVE
cleanser and soft cloth/paper towel to
clean all surfaces.
• Keep exhibit components away from heat
and prolonged sun exposure.
• Heat and UV exposure will warp and
fade components.
• Retain all provided Packing Materials.
All provided packing materials are for
ease of repacking & component protection.
Disassembly
• For loss prevention, tighten all set screws
and locks during disassembly.
General Instructions