Inclusive TLC iSwitch Operating instructions

How to use
iSwitch:
1. Pair your iSwitch to your iPad via Bluetooth. Press any buon on your iSwitch to wake it.
When the iSwitch is looking for a device to pair with, the LED display box will show moving
lights. On your iPad go to “Sengs” then “Bluetooth”. You should see an opon named
iSwitch followed by a series of numbers (the unique number series is stated on the label on
your boom of your iSwitch). Click on that to begin the pairing process.
2. The iSwitch has the integral switch as well as 2 sockets in the back for plugging in addion-
al switches. The default sengs for the integral switch and each of the sockets are as follows:
Switch — Space
Socket 1 – Enter
Socket 2 — Home
The default sengs cover many switch accessible apps, including all HelpKidzLearn and Inclu-
sive soware (space and enter).
Inclusive TLC
704-243-3622
www.inclusivetlc.com

How to use
iSwitch (connued):
3. You may want to change the sengs to one of the 24 other commands that work with the
iSwitch. These commands are shown on the cheat sheet on the boom of the unit, along with
a leer or number code for each. For example, you may want to take a picture using the cam-
era, which is set by sending a “volume up” command (code H) when the camera app is open.
a.) First, select the switch that you would like to program by repeatedly pressing the
channel buon (CHAN). The LED light will illuminate next to the number of the select-
ed socket. No LED lights are illuminated when the integral switch is selected.
b.) When a switch is selected, the current seng is shown in the LED display box.
When the socket that you want to change has been selected, repeatedly press the
mode buon unl the desired command code appears on the LED display box.
Inclusive TLC
704-243-3622
www.inclusivetlc.com

How to use
iSwitch (connued):
4. The iPad recognizes the iSwitch as an external keyboard, so the on-screen keyboard will
not automacally deploy as it usually would. To bring up the on-screen keyboard when an
iSwitch is paired with an iPad, press the MODE buon (there is an image of a keyboard above
this buon). To get out of the on-screen keyboard, press and hold the MODE buon again.
5. There is a port on the back of the iSwitch to charge the unit using the cable provided.
When the iSwitch baery is low, the middle light underneath the switch next to the baery
icon will ash red. When charging, the LED light with illuminate green. The iSwitch can sll be
used while charging. When the iSwitch is fully charged, the LED light with turn o.
Inclusive TLC
704-243-3622
www.inclusivetlc.com

7. iOS7 and later operang systems include the switch control feature, enabling switches to
be used to navigate the iPad interface. For assistance seng up Switch Control, please see the
How To Set Up Switch Control On The iSwitch document.
How to use
iSwitch (connued):
6. Whenever the iSwitch is idle for 30 minutes, it will automacally go into sleep mode. Press
any buon or switch to wake it again. If you wish to power down the iSwitch so switches can-
not be accidentally acvated (ideal when transporng the unit and switches can be banged
around), press and hold the CHAN buon unl the “1” and “2” LEDs illuminate and the num-
ber 8 shows in the LED display box. To turn it on again, press either the CHAN or MODE
buon.
Inclusive TLC
704-243-3622
www.inclusivetlc.com