Indesit TZA 1 S User manual

GB
FREEZER
Contents
Installation, 2-4
Positioning and connection
Reversible doors
Description of the appliance, 5
Overall view
Start-up and use, 6
Starting the appliance
Using the freezer to its full potential
Maintenance and care, 7
Switching the appliance off
Cleaning the appliance
Avoiding mould and unpleasant odours
Defrosting the appliance
Precautions and tips, 8
General safet
Disposal
Respecting and conserving the environment
Troubleshootin , 9
Assistance, 10
Operating Instructions
TZA 1
TZA 1 S
English, 1
GB

2
GB
Installation
Connection of the water supply
To carr this out, use the kit provided which contains all
the necessar elements for connection to the water suppl .
To improve the performance of the Aqua Care, we
recommend that ou fit a tap with a filter on the pipe for
the connection to the water s stem: in this wa it will be
possible to manuall interrupt the water suppl during long
periods in which Aqua Care is not used.
! The water pressure inside the water s stem must be
between 0.8 bar and 8 bar.
! The appliance must onl be connected to a water suppl
suitable for drinking.
Your appliance is supplied with a 13amp fused plug that
can be plugged into a 13amp socket for immediate use.
Before using the appliance please read the instructions
below.
WARNING:
THI APPLIANCE MU T BE EARTHED.
Replacing fuse covers:
When replacing a fault fuse, a 13amp ASTA approved
fuse to BS 1362 should alwa s be used and the fuse
cover re-fitted.
If the fuse cover is lost, the plug must not be used until a
replacement is obtained.
Replacement fuse covers:
If a replacement fuse cover is fitted, it must be of the
correct colour as indicated b the coloured marking or the
colour that is embossed in words on the base of the plug.
Changing the plug:
Removing the plug
If our appliance has a non-rewireable moulded plug and
ou should wish to remove it to add a longer cable or to
re-route the mains cable through partitions, units etc.
please ensure that either:
- The plug is replaced b a fused 13amp re-
wireable plug bearing the BSI mark of
approval.
or
- The mains cable is wired directl into a
13amp cable outlet, controlled b a
switch (in compliance with BS 5733)
which is accessible without moving the
appliance.
! Before placing our new appliance into operation please
read these operating instructions carefull . The contain
important information for safe use, for installation and for
care of the appliance.
! Please keep these operating instructions for future
reference. Pass them on to possible new owners of the
appliance.
Positionin and connection
Positioning
1. Place the appliance in a well-ventilated humidit -free room.
2. Do not obstruct the rear fan grills. The compressor and
condenser give off heat and require good ventilation to
operate correctl and save energ .
3. Leave a space of at least 10 cm between the top part of the
appliance and an furniture above it, and at least 5 cm
between the sides and an furniture/side walls.
4. Ensure the appliance is awa from an sources of heat
(direct sunlight, electric stove, etc.).
5. In order to maintain the correct distance between the
appliance and the wall behind it, fit the spacers supplied
in the installation kit, following the instructions provided.
Levelling
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectl horizontal, adjust the
refrigerator b tightening or loosening the rear feet.
Electrical connections
After the appliance has been transported, carefull place it
verticall and wait at least 3 hours before connecting it to
the electricit mains. Before inserting the plug into the
electrical socket ensure the following:
 The appliance is earthed and the plug is compliant with
the law.
 The socket can withstand the maximum power of the
appliance, which is indicated on the data plate located
inside the freezer (e.g. 150 W).
 The voltage is in the range of values indicated on the
data plate located inside the freezer (e.g. 220-240V).
 The socket is compatible with the plug of the appliance. If
the socket is incompatible with the plug, ask an authorised
technician to replace it (see Assistance). Do not use
extension cords or multiple sockets.
! Once the appliance has been installed, the power suppl
cable and the electrical socket must be easil accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularl and replaced b
authorised technicians onl (see Assistance).
! The manufacturer declines any liability should
these safety measures not be observed.

GB
3
Disposing of the plug
Cut off and dispose of the supplied plug if it does not fit
our socket. The cable should be cut as close as possible
to the moulded plug.
Remove the fuse.
WARNING:
To avoid a shock hazard do not insert the discarded
plug into a socket anywhere else.
Fitting a new plug
IMPORTANT:
WIRES IN THE MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE...
Green and Yellow - Earth
Blue - Neutral
Brown - Live
As the colours of the wires in the mains lead ma not
correspond with the coloured markings identif ing the
terminals in our plug, proceed as follows:
- Connect Green and Yellow wire to terminal marked
'E' or or coloured Green and Yellow.
- Connect Brown wire to terminal marked 'L' or coloured
red or brown.
- Connect Blue wire to terminal marked 'N' or coloured
Black or Blue.
If a 13amp plug (BS 1363) is used it must be
fitted with a 13amp fuse. A 15amp plug must be protected
b a 15amp fuse, either in the plug or adaptor or at the
distribution board.
If you are in any doubt about the electrical
supply to your machine, consult a qualified
electrician before use.
CE Marking certifies that this appliance conforms to
the following EEC directives :
Low Voltage Equipment - 73/23/EEC & 93/68 EEC
Electromagnetic Compatibility 89/336/EEC, 92/31/EEC
& 93/68/EEC

4
GB
Reversible doors
Warning: Before attempting to remove the door, switch off the electrical supply and pull out the mains plug.
It is recommended that ou remove an loose items/fittings from inside the appliance and place food into insulated containers whilst
carr ing out this operation.
You ma require assistance to carefull la the appliance onto its back onto suitable protective materials (i.e. original packaging).
Remove the door
1. La down the appliance on its back.
2. Unscrew, remove and retain the bottom hinge pin.
3. Slightl open the door and slide downward, remove and carefull place to one side.
4. Unscrew the hinge pin from the top right hand side and refit the pin into the hole in left hand side.
5. Use a thin blunt instrument to remove the top and bottom hinge bushes and blanking plugs from the
door, take care not to mark the door handle. Reposition the blanking plugs and bushes on the opposite side.
12
3
4
5
Replacing the door
1 .Carefull slide the door upward into the hinge pin.
2 .Fit the bottom hinge pin making sure that the door is aligned to the cabinet.
3. Carefull stand the appliance upright in its required location and make sure it is sitting level on the floor. Open and close
the door checking that the gasket makes a good seal without an gaps when the door is closed.
Note: Replace loose items/fittings back into the appliance and leave for at least 15 minutes before switching back on.
2
3
1

GB
5
Description of the
appliance
Overall view
The instructions contained in this manual are applicable to different model refrigerators. The diagrams ma not directl
represent the appliance purchased.
 Varies b number and/or position.
Flap
FREEZING and
TORAGE
compartment
TORAGE
compartment
Levelling FEET
POWER
Indicator light
FA T FREEZE
Indicator light
TEMPERATURE
CONTROL Knob
WARNING
Indicator light

6
GB
Start-up and use
Startin the appliance
! Before starting the appliance, follow the installation
instructions (see Installation).
! Before connecting the appliance, clean the compartments
and accessories well with lukewarm water and bicarbonate.
1. Insert the plug into the socket and ensure that the red
ALARM and green POWER indicator lights illuminate
(the TEMPERATURE ADJUSTMENT knob must not be
on 0).
2. Turn the TEMPERATURE ADJUSTMENT knob to the
Fast Freeze position: the ellow FAST FREEZE
indicator light will illuminate.
3. When the red indicator light switches off, turn the
TEMPERATURE ADJUSTMENT knob to a medium
position. The freezer is now read to be used.
Usin the freezer to its full potential
 Use the TEMPERATURE CONTROL knob to adjust the
temperature (see Description).
 Do not re-freeze food that is defrosting or that has
alread been defrosted. These foods must be cooked
and eaten (within 24 hours).
 Fresh food that needs to be frozen must not come into
contact with food that has alread been defrosted. Fresh
food must be stored in the top FREEZER and STORAGE
compartment where the temperature drops below -18°C
and guarantees rapid freezing.
 Do not place glass bottles which contain liquids, and
which are corked or hermeticall sealed in the freezer
because the could break.
 The maximum quantit of food that ma be frozen dail is
indicated on the plate containing the technical properties
located within the freezer (for example: Kg/24h: 4).
Freezig
1. Turn the TEMPERATURE ADJUSTMENT knob to the
Fast Freeze position (the ellow FAST FREEZE
indicator light should be on).
2. Place the fresh food ou wish to freeze inside the upper
FREEZER and STORAGE compartment, making sure it
is not in contact with food that has alread been frozen
and, if possible, position it so that it is in direct contact
with the cooling shelves. Bear in mind that for food to
be frozen and stored in good condition, the freezing
process should take place quickl . For this reason, we
recommend that ou turn the knob to the Fast Freeze
position 24 hours before placing fresh food in the
freezer. This action is necessar when freezing large
quantities of food (up to the maximum amount indicated
on the data plate).
3. Placing large amounts of fresh food in the freezer ma
temporaril increase the temperature inside the
appliance (this is indicated when the red ALARM light
illuminates). This situation, as it is onl temporar , does
not adversel affect the storage conditions of food that
is alread frozen.
4. After 24 hours, once the freezing process is complete,
return the TEMPERATURE ADJUSTMENT knob to its
normal operating position.
! remember to readjust the temperature in order to avoid
wasting energ .
! Do not open the door during freezing.
torage
 Follow the instructions given on the packaging of frozen
food carefull and consume the products within 3
months of the date the were bought.
 When bu ing frozen food, ensure that it has been stored
at a suitable temperature and that the packaging is
intact. To maintain the qualit of frozen food, use
suitable bags or containers when transporting it and
place it inside the freezer as soon as possible.
 If the packaging shows signs of moisture or unusual
swelling, it is likel that the product has been stored
previousl at an unsuitable temperature and that the
contents have suffered as a result.
 In order to obtain a larger amount of space in the
freezer, ou can remove the central drawer, and place
the food directl onto the evaporator plate. Make sure
that, after having inserted the load, the door closes
correctl .
! If there is a power cut or malfunction, do not open the
freezer door. This will help maintain the temperature inside
the freezer, ensuring that foods are conserved for at least 9
-14 hours.
! WARNING Indicator Light. When this red WARNING light
comes on for a prolonged period of time, it means that the
freezer is not functioning properl and the temperature is
rising too much. (Call our Service Centre)
This warning light might come on for a brief period when:
a) the door is left open for an extended period of time
(when the freezer is being loaded or unloaded).
b) the TEMPERATURE CONTROL knob is turned to the
Fast Freeze setting.
In these two cases, the fact that the warning light comes on
does not indicate that the freezer is malfunctioning or there
is a defect.

GB
7
Maintenance and care
Switchin the appliance off
During cleaning and maintenance it is necessar to
disconnect the appliance from the electricit suppl :
It is not sufficient to set the temperature adjustment knobs
on 0 (appliance off) to eliminate all electrical contact.
Cleanin the appliance
 The external and internal parts, as well as the rubber
seals ma be cleaned using a sponge that has been
soaked in lukewarm water and bicarbonate of soda or
neutral soap. Do not use solvents, abrasive products,
bleach or ammonia.
 The removable accessories ma be soaked in warm
water and soap or dishwashing liquid. Rinse and dr
them carefull .
 The back of the appliance ma collect dust which can
be removed b delicatel using the hose of a vacuum
cleaner set on medium power. The appliance must be
switched off and the plug must be pulled out before
cleaning the appliance.
Avoidin mould and unpleasant odours
 The appliance is manufactured with h gienic materials
which are odour free. In order to maintain an odour free
refrigerator and to prevent the formation of stains, food
must alwa s be covered or sealed properl .
 If ou want to switch the appliance off for an extended
period of time, clean the inside and leave the doors
open.
Defrostin the appliance
! Follow the instructions below.
Do not use objects with sharp or pointed edges to defrost
the appliance as these ma damage the refrigeration circuit
be ond repair.
If the frost la er is greater than 5 mm, it is necessar to
defrost manuall :
1. Set the TEMPERATURE ADJUSTMENT knob to the 0
position.
2. Wrap frozen foods in newspaper and place them in
another freezer or in a cool place.
3. Leave the door open until the frost has melted
completel . This can be made easier b placing
containers with lukewarm water in the freezer
compartment..
4. The appliance is
equipped with a s stem that
collects the water produced
b the defrosting process:
let the water collect in a
container (see figure).
5. Clean and dr the freezer compartment carefull before
switching the appliance on again.
6. Wait for approximatel 2 hours, i.e. until the ideal storage
conditions have been restored, before placing food in the
freezer compartment.

8
GB
Precautions and tips
! The appliance was designed and manufactured in
compliance with international safet standards. The
following warnings are provided for safet reasons and
must be read carefull .
This appliance complies with the following
Communit Directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and
subsequent amendments;
-89/336/EEC of 03.05.89 (Electromagnetic
Compatibilit ) and subsequent amendments;
- 2002/96/CE..
General safety
 The appliance was designed for domestic use inside the
home and is not intended for commercial or industrial
use.
 The appliance must be used to store and freeze food
products b adults onl and according to the instructions
in this manual.
 The appliance must not be installed outdoors, even in
covered areas. It is extremel dangerous to leave the
appliance exposed to rain and storms.
 Do not touch the appliance with bare feet or with wet or
moist hands and feet.
 Do not touch the internal cooling elements: this could
cause skin abrasions or frost/freezer burns.
 When unplugging the appliance alwa s pull the plug from
the mains socket, do not pull on the cable.
 Before cleaning and maintenance, alwa s switch off the
appliance and disconnect it from the electrical suppl . It
is not sufficient to set the temperature adjustment knobs
on 0 (appliance off) to eliminate all electrical contact.
 In the case of a malfunction, under no circumstances
should ou attempt to repair the appliance ourself.
Repairs carried out b inexperienced persons ma cause
injur or further malfunctioning of the appliance.
 Do not use an sharp or pointed utensils or electrical
equipment - other than the t pe recommended b the
manufacturer - inside the frozen food storage
compartments.
 Do not put ice cubes taken directl from the freezer into
our mouth.
 Do not allow children to tamper with the controls or pla
with the appliance. Under no circumstance should the
be allowed to sit on the bins or to hang from the door.
 Keep packaging material out of the reach of children! It
can become a choking or suffocation hazard.
Disposal
 Observe local environmental standards when disposing
packaging material for rec cling purposes.
 The European Directive 2002/96/EC on Waste Electrical
and Electronic Equipment (WEEE), requires that old
household electrical appliances must not be disposed of
in the normal unsorted municipal waste stream. Old
appliances must be collected separatel in order to
optimise the recover and rec cling of the materials the
contain and reduce the impact on human health and the
environment. The crossed out wheeled bin s mbol on
the product reminds ou of our obligation, that when
ou dispose of the appliance it must be separatel
collected.
Consumers should contact their local authorit or retailer
for information concerning the correct disposal of their
old appliance.
Respectin and conservin the
environment
 Install the appliance in a fresh and well-ventilated room.
Ensure that it is protected from direct sunlight and do
not place it near heat sources.
 Tr to avoid keeping the door open for long periods or
opening the door too frequentl in order to conserve
energ .
 Do not fill the appliance with too much food: cold air
must circulate freel for food to be preserved properl . If
circulation is impeded, the compressor will work
continuousl .
 Do not place hot food directl into the refrigerator. The
internal temperature will increase and force the
compressor to work harder and will consume more
energ .
 Defrost the appliance if ice forms (see Maintenance). A
thick la er of ice makes cold transference to food
products more difficult and results in increased energ
consumption.
 Regularl check the door seals and wipe clean to ensure
the are free of debris and to prevent cold air from
escaping (see Maintenance).

GB
9
Troubleshooting
If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.
Malfunctions:
The green POWER indicator light
does not illuminate.
The indicator lights are on but the
light is dim.
The ALARM indicator light remains
illuminated constantly.
The motor runs continuously.
The appliance makes a lot of noise.
Possible causes / Solutions:
 The plug has not been inserted into the electrical socket, or not far enough
to make contact, or there is no power in the house.
 Pull out and reverse the plug before putting it back in the socket.
 The door is not closed properl or has been open continuousl .
 The door has been opened too frequentl .
 The TEMPERATURE ADJUSTMENT knob is not in the correct position.
 The TEMPERATURE ADJUSTMENT knob is in the Fast Freeze position:
the ellow FAST FREEZE indicator light is on (see Description).
 The door is not closed properl or is continuousl opened.
 The outside ambient temperature is ver high.
 The thickness of the frost exceeds 2-3 mm (see Maintenance).
 The appliance has not been installed on a level surface (see Installation).
 The appliance has been installed between cabinets that vibrate and make
noise.
 The internal refrigerant makes a slight noise even when the compressor is
off. This is not a defect, it is normal.

10
GB
Assistance
Before calling for Assistance:
Check if the malfunction can be solved on our own (see Troubleshooting).
 If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service
Centre
Communicating:
 t pe of malfunction
 appliance model (Mod.)
 serial number (S/N)
This information can be found on the data plate
located on the bottom left side of the
refrigerator compartment.
Never call on unauthorized technicians and always refuse spare parts which are not originals.
Mod.
RG 2330 TI
Cod.
93139180000 S/N 704211801
220 - 240 V- 50 Hz 150 W W
Fuse AMax 15 w
Total
Gross
Bruto
Brut
Compr.
Kompr.
Syst. R 134 a
kg 0,090
Gross
Bruto
Brut
340
Net
Util
Utile
Gross
Bruto
Brut
Freez. Capac
Poder de Cong
75
Made in Italy 13918
Test
P.S-I.
Pressure
HIGH-235
LOW 140
kg/24 h
4,0
Class
Clase
N
Classe
model serial number

GB
11

12
GB
195051960.02
07/2007 - Xerox Business Services