Indesit Aqualtis AQ D Series User manual

WASHING
Service Quick Guide
Service Quick Guide
Indesit Company, Service Department
SQG_WM_30_GB
1/2
Aqualtis 2008 LCD Interface washing machine
Arcadia washing machine: “AQ.D...”
Models Covered:
Demo Mode:
In LCD interface appliances Demo Mode is selected by pressing the following buttons simultaneously:
“Power On” + “Start/Pause” + “Last function on right”
To deactivate press the following buttons simultaneously:
“Power On” + “Start/Pause”
Interface:
1679
Function Buttons
1 ON/OFF button and LED
2 PROGRAM knob
3 PROGRAM MEMORY buttons
4 LCD display
5 WASH OPTION buttons
6 ECO LED
7 START/PAUSE button
8 WASH PHASE LEDs
9 CHILD LOCK button and LED
10 DOOR LOCK LED
3
2
8
10
4 5

Lavabiancheria Aqualtis 2008 Interfaccia LCD
2/2
Appliance response in the event of a fault:
Fault messages:
In case of a fault the appliance will fill with water and drain continuously to prevent damage to the heating
element and possible flooding.
The faults are the same as those of the Arcadia platform (see file “Arcadia Platform Fault Table”) .
The fault will be displayed on the control console while the program progress LEDs flash rapidly.
Fault Table reference:
See SQG WM 24 (Full) / SQG WM23 (Basic)
Autotest function:
The Autotest of appliances with LCD interface is started with the following steps.
Start with the appliance off:
1. Press button 1 (you will hear a BEEP)
2. Press button 2 (you will hear a BEEP)
3. Press button 3 (you will hear a BEEP)
4. Press button 4 (you will hear a BEEP)
5. Press button 5 (you will hear a BEEP)
6. Press button 6 (you will hear a BEEP)
7. Press buttons 1 and 6 simultaneously for 6 seconds ( you will hear a longer beep and the Autotest
procedure will start automatically).
1
2
3
6
5
4
The autotest must be launched no later than 30 seconds after the appliance has been switched off.