Infinias S-ima-nvr series User manual

1www.innias.com

Congratulations on your new innias Access Control and Video Management System

This guide provides setup instructions for your server hardware.

For more information, contact us at

877.496.5783 Toll Free • Support at innias

innias Intelli-M Access NVR Chassis

IN_S-IMA-NVRxT_2U_R_CoQ

3/5/14

S-IMA-NVR Series Intelli-M Access NVR

Hardware Quick Start Guide

Access Control and Video Management Systems

2www.innias.com

1. Getting Started

Unpacking the Contents

The following are included with your system. Please inspect these and the other system

components while unpacking.

• Quick Start Guides

• Intelli-M Access Activation License cards

• Surge Protection Notice

• Rail brackets and handles for rack mounting

• Rubber feet for desktop use

• USB Flash Drive loaded with backup image

• Power cord

Choose a Proper Location

Select a location for the system that meets the following requirements.

NOTICE: Excessive heat can shorten the life of electronics.

• Adequate ventilation to avoid excessive heat (climate-controlled environment)

• Uninterrupted Power Supply (UPS)

• Moisture-free environment

• A place away from direct sunlight

• An area with minimal dust or debris

Site Installation

Hardware Setup – Connect all input devices and external peripherals to the system. Follow the order of connections displayed in Step 3.

• VGA Monitor

• Ethernet

• Mouse

• Keyboard

• Power Cord

• Speakers, Audio In (optional)

2. About Your System

Front View

HDD activity LED

Rail brackets and handle Rail brackets and handle

Power on LED

Maintenance access

door knob (with lock)

Maintenance access door (2)*

* Front panel Power and Reset switches are located behind the left access door.

3www.innias.com

Back View

Power On / O switch

Back panel Power cable connector

Back Panel Intel® AMT port

USB 3.0 (SS) ports (2)USB 2.0 ports (2)

Ethernet RJ-45 port

DisplayPort**

Charging USB

ports (2) Line-in,

Line-out,

Mic-in

connectors

DVI-I* monitor port

DVI-D monitor

port

1394 port

e-SATA port

* DVI-I port with a DVI to VGA adapter can connect to a VGA monitor.

** Using the DisplayPort for video may require an optional adapter to connect to older monitors which only support VGA and/or DVI. When connecting to

a DisplayPort monitor or adapter, multi-monitor capability of the system is not available during boot or when running DOS. Output will be limited to the

DisplayPort monitor only. When the system is booted to Windows and the graphics driver is loaded, multi-monitor support will be fully functional.

3. Setting Up Your System

1. Connect a monitor(s) to any of the following:

DVI-I, DVI-D, DisplayPort

2. Connect the network cable to the Ethernet port. 3. Connect the keyboard and mouse to the

USB 2.0 connectors

4. Connect the power cable 5. Power on the monitor and computer.

NOTE: A chassis power

switch is also located

behind the maintenance

access door.

GETTING THE MOST OUT OF YOUR SERVER

2 YEAR WARRANTY

The server hardware comes with a 2 year return to innias warranty. For support, please contact innias in the USA at 866-496-5783.

CUSTOMER SUPPORT

For all software and operating system questions, contact innias support at 866-496-5783. For questions about installation please contact your dealer/systems integrator.

AUTOMATIC BENEFITS

The S-IMA-NVR server will back up the Intelli-M Access databases nightly to the local drive in D:\. Files in this folder should be copied to another computer or to removable storage on a regular basis.

SERVER SYSTEM FEATURES

• Intel i5 processor

• 8GB RAM