Infinity iW-1915 Pixel User manual

Infinity iW-1915 Pixel V1
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: 41523
MANUAL
ENGLISH

1
Ordercode: 41523
Infinity iW-1915 Pixel
Table of contents
Warning ...............................................................................................................................................................................2
Safety Instructions .........................................................................................................................................................2
Operating Determinations ..........................................................................................................................................4
Rigging ............................................................................................................................................................................4
Connection with the mains.........................................................................................................................................5
Return Procedure..........................................................................................................................................................6
Claims..............................................................................................................................................................................6
Description of the device.................................................................................................................................................7
Frontside..........................................................................................................................................................................7
Backside .........................................................................................................................................................................8
Installation...........................................................................................................................................................................8
Set Up and Operation .......................................................................................................................................................8
Control Modes...............................................................................................................................................................9
One Infinity (Stand-alone)........................................................................................................................................9
Multiple Infinitys (Master/Slave control).................................................................................................................9
Multiple Infinitys (DMX control) ..............................................................................................................................10
Multiple Infinitys (ArtNet control)...........................................................................................................................11
Fixture Linking...............................................................................................................................................................12
Data Cabling...............................................................................................................................................................12
Control Panel ...............................................................................................................................................................13
Control Mode ..............................................................................................................................................................13
DMX Addressing ..........................................................................................................................................................13
Menu Overview...........................................................................................................................................................14
Main Menu Options....................................................................................................................................................16
1. DMX Addressing...................................................................................................................................................16
1.1. DMX settings ......................................................................................................................................................16
1.2. ArtNet settings (ArtNet + DMX mode) ..........................................................................................................17
2. Edit Mode..............................................................................................................................................................17
3. Settings Menu.......................................................................................................................................................18
3.1. Color Balance ...................................................................................................................................................18
3.2. Life Time..............................................................................................................................................................19
3.2.1. Set Password ..................................................................................................................................................19
3.2.2. Network settings ............................................................................................................................................19
3.3. Reset ...................................................................................................................................................................20
4. Built-in Programs...................................................................................................................................................20
5. Test Menu ..............................................................................................................................................................21
6. System information ..............................................................................................................................................22
DMX Channels .............................................................................................................................................................22
21 channels...............................................................................................................................................................22
97 channels...............................................................................................................................................................26
76+14 channels (ArtNet + DMX mode)................................................................................................................32
Connecting to a Network ..............................................................................................................................................36
ArtNet settings .............................................................................................................................................................36
How to make a data cable......................................................................................................................................36
Maintenance....................................................................................................................................................................37
Replacing the Fuse.....................................................................................................................................................37
Troubleshooting ...............................................................................................................................................................37
No Light.........................................................................................................................................................................37
No Response to DMX..................................................................................................................................................38
Product Specifications....................................................................................................................................................39
Dimensions........................................................................................................................................................................40
Notes ..................................................................................................................................................................................41

2
Ordercode: 41523
Infinity iW-1915 Pixel
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
Infinity iW-1915 Pixel
2 x mounting bracket with quick-locks
Neutrik PowerCON to Schuko power cable 1,5 m
User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason, when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving life expectancy is of higher priority, place care in providing for lower
operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
be qualified
follow the instructions of this manual
Before the initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.

3
Ordercode: 41523
Infinity iW-1915 Pixel
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never lift the fixture holding it by the projector-head, as the mechanics may be damaged. Always
hold the fixture by the transport handles.
Never place any material over the lens.
Never look directly into the light source.
Never leave any cables lying around.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this will reduce the device’s life.
Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Allow the fixture to cool for at least 5 minutes before handling.
Do not shake the device. Avoid brute force when installing or operating the device.
Only use the device indoors, avoid contact with water or other liquids.
Only operate the fixture after having checked if the housing is firmly closed and all screws are tightly
fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always keep the case closed while operating.
Always allow a free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord holding it by the plug. Never pull out the plug by tugging the power cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
If the lens is obviously damaged, it has to be replaced.
If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
If your Infinity device fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. The moving head must be installed beyond the reach of children. Never leave the
unit running unattended.
Never attempt to bypass the thermostatic switch or fuses.
For replacement use fuses of same type and rating only.
The user is responsible for correct positioning and operating of the Infinity. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.

4
Ordercode: 41523
Infinity iW-1915 Pixel
Operating Determinations
This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
The minimum distance between light output and the illuminated surface must be more than 1,5
meter.
The maximum ambient temperature ta = 40°C must never be exceeded.
The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself!
Always have the inspections carried out by an authorized dealer!
Procedure:
If the projector is lowered from the ceiling or high joists, professional trussing systems have to be used.
Use a clamp to mount the projector, with the mounting bracket, to the trussing system.
The projector must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
When rigging, derigging or servicing the projector, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.

5
Ordercode: 41523
Infinity iW-1915 Pixel
The Infinity can be placed on a flat stage floor or mounted to any kind of truss with a mounting bracket
and a clamp.
Improper installation can cause serious injuries and/or damage of property!
Connection with the mains
Connect the device to the mains with the power-plug.
Always check if the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Make sure that the device is always properly connected to the earth!
Improper installation can cause serious injuries and/or damage of property!

6
Ordercode: 41523
Infinity iW-1915 Pixel
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.

7
Ordercode: 41523
Infinity iW-1915 Pixel
Description of the device
Features
The Infinity iW-1915 Pixel is a moving head effect with high output and great effects.
Input voltage: 100-240V, 60/50Hz
Power consumption: 675W
DMX channels: 21, 97, 76+14 channels
LCD display with gravity sensor
Light source: 19 x 15W RGBW 4-in-1 Osram Ostar
Lux @ 2m: 36600
Color temperature: 19000K
Control modes: Stand-alone, Master/Slave, DMX-512, DMX-512+ArtNet
Control protocol: DMX-512, ArtNet
Dimmer: 0-100%
Strobe: 0-20Hz
Dimming curves: Linear, Square, I-Square, S-curve
Beam Angle: 7-50°
Motorized Zoom: 7-50°
Pan: 540°
Tilt: 270°
IP rating: IP20
Housing: Metal & Flame retardant plastic
Connections: Neutrik PowerCON & 3-pin/5-pin XLR IN/OUT
Fuse: F7AL/250V
Dimensions: 355 x 300 x 455 mm (LxWxH)
Weight: 14,28 kg
Frontside
Fig. 01
01) 19 x 15W RGBW 4-in-1 Osram Ostar
02) LCD display + menu buttons

8
Ordercode: 41523
Infinity iW-1915 Pixel
Backside
Fig. 02
03) 5-pin DMX signal connector IN
04) 5-pin DMX signal connector OUT
05) PowerCON power connector 100-240V IN
06) RJ45 Ethernet connector
07) Fuse F7AL/250V
08) PowerCON power connector 100-240V OUT
09) 3-pin DMX signal connector OUT
10) 3-pin DMX signal connector IN
Installation
Remove all packing materials from the Infinity iW-1915 Pixel. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.

9
Ordercode: 41523
Infinity iW-1915 Pixel
Control Modes
There are 4 modes:
•Stand-alone
•Master/Slave
•DMX-512 (21CH, 97CH)
•DMX-512+ArtNet (76+14CH)
One Infinity (Stand-alone)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) When the Infinity is not connected with a DMX cable, it functions as a stand-alone device.
Please see pages 16-22 for more information about the Stand-alone Mode.
Multiple Infinitys (Master/Slave control)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Use a 3-pin/5-pin XLR cable to connect the Infinity.
The pins:
01) Earth
02) Signal -
03) Signal +
03) Link the units as shown in fig. 03. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.
You can use the same functions on the master device as described on pages 16-22. This means that
you can set your desired operation mode on the master device and all slave devices will react the
same as the master device.
Multiple Infinitys (Master/Slave control)
Fig. 03

10
Ordercode: 41523
Infinity iW-1915 Pixel
Multiple Infinitys (DMX control)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-pin/5-pin XLR cable to connect the Infinity and other devices.
04) Link the units as shown in fig. 04. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.
05) Supply electric power: Plug electric mains power cords into each unit's PowerCON socket, then plug
the other end of the mains power cord into proper electric power supply sockets, starting with the
first unit. Do not supply power before the whole system is set up and connected properly.
Multiple Infinitys DMX Set Up
Fig. 04
Note : Link all cables before connecting electric power

11
Ordercode: 41523
Infinity iW-1915 Pixel
Multiple Infinitys (ArtNet control)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a CAT-5/CAT-6 cable to connect your ArtNet controller to a network switch.
04) Link all the Infinitys by connecting their RJ45 sockets to your network switch, using a CAT-5/CAT-6
signal cable.
05) Supply electric power: Plug electric mains power cords into each unit's PowerCON socket, then plug
the other end of the mains power cord into proper electric power supply sockets, starting with the
first unit. Do not supply power before the whole system is set up and connected properly.
Multiple Infinitys ArtNet Set Up
Fig. 05
Note : Link all cables before connecting electric power

12
Ordercode: 41523
Infinity iW-1915 Pixel
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important:
Fixtures on a serial data link must be daisy-chained in a single line. To comply with the
EIA-485 standard, no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of fixtures on a DMX data link: 30 fixtures
Maximum recommended number of fixtures on a power link: 5 fixtures @ 110V
Maximum recommended number of fixtures on a power link: 9 fixtures @ 240V
Data Cabling
To link fixtures together, you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable,
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio DMX Data Cables
•DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin.
Ordercode FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).
•DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),
FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).
•DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).
•DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).
•DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),
FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).
DAP Audio PC Interface Cables
CAT-5 cable 7,6 mm Matte blue PVC. Ordercode FL55150 (1,5 m), FL553 (3 m), FL556 (6 m),
FL5510 (10 m), FL5515 (15 m), FL5520 (20 m).
CAT-6 cable (recommended for best data transfer). Ordercode FL563 (3 m), FL566 (6 m),
FL5610 (10 m), FL5615 (15 m), FL5640 (40 m).

13
Ordercode: 41523
Infinity iW-1915 Pixel
Control Panel
A)
B)
C)
D)
E)
F)
G)
H)
I)
J)
K)
Home button
Edit Menu button
Settings Mode Button
Address Setting Button
Infinity Logo Button
Up Button
Down Button
OK/ENTER
Left Button
Right Button
LCD Display
Fig. 06
Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address the next time.)
DMX Addressing
The control panel on the front side of the base allows you to assign the DMX fixture address, which is the
first channel from which the Infinity will respond to the controller.
Please note when you use the controller, the unit has 97 channels.
When using multiple Infinitys, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Infinity should be 1(001); the DMX address of the second Infinity
should be 1+97=98 (098); the DMX address of the third Infinity should be 98+97=195 (195), etc.
Please, be sure that you don’t have any overlapping channels in order to control each Infinity correctly.
If two or more Infinitys are addressed similarly, they will work similarly.
Controlling:
After having addressed all Infinity fixtures, you may now start operating these via your lighting controller.
Note: After switching on, the Infinity will automatically detect whether DMX 512 data is received or not. If
there is no data received at the DMX-input, the “LED“ on the control panel will not flash.
The problem may be:
●The XLR cable from the controller is not connected with the input of the Infinity.
●The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note: It’s necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.
Display Off after 35 seconds
When no button is pressed for 35 seconds, the display will turn off.
To light up the display, you have to press one of the menu buttons described above.
Once you have pressed the button, the display will light up.

14
Ordercode: 41523
Infinity iW-1915 Pixel
Menu Overview

15
Ordercode: 41523
Infinity iW-1915 Pixel

16
Ordercode: 41523
Infinity iW-1915 Pixel
Main Menu Options
DMX address
Edit Mode
Settings Menu
Built-in Programs
Test Mode
Info
Home
Up
Edit Menu
Down
Setting Mode
OK
Address Setting
Left
Infinity Logo
Right
1. DMX Addressing
With this menu you can set the DMX address.
01) Press the button or press the buttons to select .
02) Now you can adjust either DMX settings or ArtNet settings, depending on the current operating
mode.
1.1. DMX settings
01) Press the button, to confirm. You can choose from 512 different DMX addresses.
02) press the and/or buttons to select the required address from
.
03) Once you have set the desired DMX address, press the button to store your DMX address.

17
Ordercode: 41523
Infinity iW-1915 Pixel
1.2. ArtNet settings (ArtNet + DMX mode)
01) Activate Art + DMX (76+14) mode (see 2. Edit Mode, page 17).
02) Press the button, to confirm. You can now set the DMX starting address and/or the device’s
ArtNet address.
03) Press the buttons to select the digit which you want to adjust.
04) Press the buttons to change the value.
05) Once you have made all the desired changes, press the button to store.
2. Edit Mode
With this menu you can set your desired mode.
01) Press the button or press the buttons to select .
02) Press the button, to confirm. You can choose one of the 4 available modes.
03) Press the buttons to select the required mode:
04) Once you have selected the desired mode, press the buttons to change the value from
NO to YES.
05) Press the button to confirm your choice.
06) If the device has been set to Master mode, all the connected slave devices will act the same as the
master device.
07) If the device has been set to slave, it will react the same as its master device.

18
Ordercode: 41523
Infinity iW-1915 Pixel
3. Settings Menu
With this menu you can set your desired mode.
01) Press the button or press the buttons to select .
02) Press the button, to enter the menu. You can choose from 19 different modes.
03) Press the buttons to select the required mode:
04) Once you have selected the desired mode, press the button to proceed to edition.
05) Press the buttons to change the value from NO to YES.
06) Some of the available menus have different options to the regular, YES or NO function:
Pan Angle: 540°, 360°, 180°
Tilt Angle: 270°, 180°, 90°
P/T Speed: Fast, Slow
Fans: Auto,Silent, Full
C Mixing Mode: RGBW, CMY
Dimmer Curve: Linear, Square, I Squa, Scurve
Dimmer Speed: Smooth, Fast
3.1. Color Balance
With this menu you can set the device’s color brightness.
01) Press the buttons to select Color Balance and press the button to open the menu.
02) You can now adjust 4 colors: Red, Green, Blue, White.
03) Choose the desired color, press the button and then press the buttons to set the
value. The adjustment range is between 0-255, from dark to brightest.
04) You can combine Red, Green, Blue and White to create an infinite range of colors.
05) If you want to use the Infinity in ArtNet+DMX mode, the color balance of all the 4 colors must be set
to 0. Otherwise, the device will not function properly.

19
Ordercode: 41523
Infinity iW-1915 Pixel
3.2. Life Time
With this menu you can reset the device’s counters.
01) Press the buttons to select Life Time and press the button to open the menu.
02) Press the buttons to choose one of the 3 reset options:
Time Counter (the time counter will be reset)
Total Life Time (the device’s operation time counter will be reset)
Set Password
03) If you select Time Counter or Total Life Time, press the button to open the selection menu.
04) Press the buttons to choose either YES or NO. Press the button to confirm.
3.2.1. Set Password
With this menu you can set the new password for the device.
01) Press the buttons to select Set Password and press the button to open the menu.
02) The following screen will pop up:
03) Press the buttons to select the digit which you want to edit.
04) Press the buttons to adjust the values.
3.2.2. Network settings
With this menu you can set the device’s network settings.
01) Press the buttons to select Network Settings and press the button to open the menu.
02) The following screen will pop up: