
3
Once the Webbing Strap(3) is fully inserted through the
device slot, it needs to loop through the Webbing Glide (2).
It should pass through the bottom of the Glide and then back
through the top.
2
To nish installation, loop the Nylon Webbing Strap(3) back
through the bottom of the Webbing Glides. This ensures a tight
connection to the device that will support use of the Ergonomic
Handle(5) and Shoulder Strap(4).
3
Warning: For a secure connection to be created you must loop
the Nylon Webbing Straps(3) through the Webbing Glides(2)
all three times as shown above.