Inland 791MT User manual

®
®
M4,M5,M8
M8X60 MM M10X50MM
1.38”
M8
FIND A LIST OF THE
TOOLS REQUIRED
ON THE BACK.
6588LBS.
Drill Bit
Drill Bit

Flat Panel Display Mounts
1-Year Limited Warranty
IPSG warrants that this product is free from any defects in materials or work-
manship withinone year of purchase date. If such a defect is discovered within
this warranty’s limitations, IPSG agrees at its sole discretion to repair this prod-
uct or to replace itwith the same item or one of equal value, free of charge to
the originalpurchaser. Please return the defective product to the store where
it was purchased.
EXCLUSIONS:
This warranty does not apply to this product if the product has been modi-
misusedor transferred to another consumer other than the original purchaser.
IPSG requires professional installation for all display mounts and does not
accept damages or liability due to improper installation or installation within
and to structures that cannot support the mount and/or display weight.
Product Registration
Please register this product at www.ipsgproducts.com
Click the “REGISTRATION” link button in the side menu. Enter your name, ad-
dress and contact information. Continue to Step 2 and select your product
type as “LCD/TV/Display Accessories”. In Step 3 choose your model name and
number in the drop down menu and place of purchase to complete your reg-
istration. Yourpersonal contact information will remain private and willnot be
sold or given to another company.
If you have questons, please contact us through the side bar menu link on
the www.ipsgproducts.com web page. Enter all of your product and personal
© International Products Sourcing Group, Inc. 2013. No part of this user manual may be reproduced in any form or by any
means, mechanical or electronic, including recording, photocopying, or by any information storage or retrieval system,
without permission in writing from IPSG.
TOOLS REQUIRED:
__ Cordless or Electric Drill
5mm (3/16") Drill Bit for Drywall/Wood Stud Installation
10mm (3/8") Drill Bit for Concrete/Masonry Installation
__
__
Socket Wrench with 10mm Socket
__
__ High Quality Stud Finder
__ Long & Regular Phillips Head Screwdrivers
__ Safety Goggles
__ Measuring Tape
__ Level
__ Pencil
Read all instructions carefully before installation.
The installer of this product must verify that the mounting surface, ceiling or wall will safely support the combined
weight of all attached equipment and hardware. Improper mounting installation and/or exceeding recommended
TV weight can result in damage to the TV and may cause injury or death. This product is not intended to hold more
than the maximum weight advised on the packaging. If you do not understand these directions, or have any doubts
about the safe installation of your television mount please contact a professional installer to install it for you.