Innovi YR-600U1 User manual

Thank you for your purchasing this product. Before attempting to connect or operate this
product, please read these instructions carefully and save this manual for future use.
D E S C R I P T I O N
CAUTION
RIS K OF EL ECT RIC
SHO CK DO N OT OP EN
CAUT IO N: T O RE DU CE T HE R IS K OF E LE CT RI C
SH OC K, D O NO T RE MO VE C OV ER
(O R BA CK ).
NO U SE R- SE RV IC EA BL E PA RT S IN SI DE . RE FE R
SE RV IC IN G TO Q UA LI FI ED S ER VI CE P ER SO NN EL
PRECAUTIONS
1.
YR-600U1 is DC12V/AC24V.
2.
3.
4. Do not expose the camera to rain or moisture, or try to operate it in wet areas.
Do not place the camera in the following locations:
①Locations where temperature is lower than -10C or higher than 50C;
②Locations where humidity is higher than 95%;
③Locations where there are large amounts of water vapor and steam.
Use the Appropriate Power Supply
The input power for Be sure to connect it to the appropriate
power. Wrong connection may cause malfunction and/or damage to the video camera.
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user serviceable
parts inside. Ask a qualified service person for servicing.
Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by
improper handling or storage.
FEATURES
5. Do note use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove. Use a mild
detergent and wipe gently.
Clean the CCD faceplate with care.
When cleaning the CCD panel, do not use strong or abrasive detergents. Use a piece of lens
tissue or cotton tipped applicator and ethanol.
Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely bright objects that cause
smear to appear irrespective of whether the camera is operating or not. This can damage
the CCD (Charge Coupled Device).
Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communication device which
emits strong electromagnetic field, some irregularity such as noise on monitor screen may happen.
6.
7.
8.
Color High Resolution Camera
Operating Instruction
Use special algorithm, reduce video and color noises, which increases its resolution
and cleanliness and creates clearer and sharper images.
3D-DNR
SPE C IFIC A TION S
420 TV Line
Ad va nc ed I ma ge P ro ce ss in g Te ch no lo gy ; 65 0T VL H ig h Re so lu ti on ; Cl ea r Br ig ht P ic tu re s
650 TV Line
Model No
Sensor
Video Format
Sync Mode
Resolution
S/N Ratio
Mini Illumination
AGC
White Bal
BLC
Mirror
Iris Control
Shutter Speed
Voltage
Current
Operating Temp
Storage Temp
Dimension
Weight
Mode
Range
1/3″High Sensitivity CCD
PAL/NTSC
INTERNAL
650TVL
0.01Lux
LOW; MIDDLE; HIGH; OFF
ON; OFF; HS BLC
ON/OFF
Electronic Iris/Auto Iris Lens (DC Drive)
1/60(1/50)-1/100000 Second
DC12V/AC24V
<100mA
>50dB (AGC OFF)
MANUAL; AUTO TRACING; AUTOMATICAL
(AUTOMATICAL) 2200~10000°K
YR-600U1
-10℃ ~50℃
-20℃ ~50℃
Day/Night
AUTO; COLOR; B&W
Motion Detection
ON/OFF
Sensor
Privacy ON/OFF
Adjustment BRIGHTNESS; SHARPNESS
Title ON/OFF
Menu Oper Power
3D-DNR
D-WDR
ON/OFF
ON/OFF
*Spe cifi c atio n s subj ect to ch ange w i thou t n otic e.
Lens Mount CS Mount
130(L) * 60(H) * 50(W)
400g
D-W D R
Advanced D-WDR technology largely improves its image effect even under an
environment with little light.
HS BL C
Camera can automatically detect highlight spots and cover the high light spots on
the image to improve the resolution of the whole picture and carry out an effective
monitoring more clearly.
YR-600U1 employs new generation image processing technology. It has high horizontal
resolution up to 650TVL as well as advanced 3D-DNR, D-WDR, HS BLC and other functions.
Powerful OSD menu includes Brightness, Contrast, Saturation adjusting functions; Multi-area
BLC, White Balance, AGC and other functions ensure clear bright pictures. Besides, Mirror,
Motion Detection, Privacy and other aided functions make it suitable for various special
environments and help to carry out an easy 24-hour day&night monitoring.
650TVL horizontal resolution
高清晰度
High Resolution
Powerful OSD menu can set all functions on the camera.
OSD M e nu
COLOR mode in daytime when there is enough light; at night when there is little light,
sensitivity and image quality need to be higher, it will switch to B/W mode automatically.
Aut o D /N Swi t hove r O per a ting M o de
Compatible with DC12V and AC24V. Camera can automatically switch to the
appropriate mode according to the input power.
DC1 2 V/AC 2 4V Dua l P owe r S uppl y
NO . D C Dr ive
1 Co n tr ol -
2 Co n tr ol +
3 Dr i ve +
4 Dr i ve -
11
22
33
44
部件及功能说明说明
①④
②③
VIDEO
PWR
DC12V/AC24V
SEE
INSTRUCTION
MANUAL
Menu Right
Left
Up
Down
⑤⑥
⑦
⑧
① CS-Mount Lens Adapter,
used to connect to CS-Mount lens.
② Back Focus Fixing Screw,
used to readjust camera focus. Use
screw driver to unscrew the screw
and turn CS-Mount before adjusting
focal length to get clear picture.
③ Auto Iris Lens Interface,
used to connect to auto Iris lens plug.
⑤ Compound Video Signal Output
⑥
⑦ Power Input
⑧
VIDEO：
Menu/up/down/left/right
：AC24V/DC12V
PWR：Power LED
④ Bracket Fixing Hole,
used to install camera to the bracket
用摄像机 后面的5个菜 单 按钮来设 置 摄像机
OSD Function Setting:
Menu: Menu Button, Choose Menu Item or Exit Menu
Up/down:
Left/right:
,
This button is used to move the cursor upward or downward.
This left or right button is used to move the cursor horizontally or change
parameter. Its back with symbol means there are still subordinate submenu
setups. Press Left/Right to enter setting and press RETURN button to go back to
the previous menu.
VIDEO
PWR
SE E
INSTRUCTION
MA NU AL
Me n u Rig h t
Le f t
Up
Do w n
左键 上键
右键
下键
菜单
DC 12V /AC 24 V
功 能 说 明
PAR T S INST R UCTI O N
FU N C T I O N I N S TRUCTION
D I M E N S I O N S ( U n i t : m m )
Use t h e five b u tton s o n the b a ck to se t c amer a .
PZ0461

EN-U1-600-110923
MEN U O PERA T ION IN S TRU C TION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by UP and DOWN buttons and set lens by left and right buttons: manual
iris lens; DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXP O SURE :
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY & NIGH T :
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF. Move the cursor to SHARPNESS, and set
SHARPNESS range. Move the cursor to MONITOR, and set MODE type. Move to cursor
GAMMA, and set GAMMA range. Move the cursor to LSC, and set it: ON; OFF.
EX P WB D&N F U N C MOT PVM SET SYS EXIT
EXPOSURE
HB L C/D - WDR
AG C
3D-DNR
SE N SE- U P
EX I T
LE N S
LOW
HIGH
ELC
OFF
X4
RETURN
LENS-ELC
BR I GHT
E. S H UTT E R
RE T URN
AU T O
03 5
HLI
MO D E
SE T L EVE L
GR A Y MOD E
MA S K SEL
HB L C
BLACK
010
AL L D AY
RE T URN
MA S K 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC;
set BLC by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.
Set HBLC by left and right buttons: ALL DAY; ON. When HBLC is ON, you can set SET LEVEL,
GRAY MODE and MASK SEL. Set D-WDR by left and right buttons.
D- W DR
D- W DR LE V EL
010
RE T URN
COLOR
R- Y G AIN
B- Y G AIN
WB M O DE
120
120
EX I T
ATW
WB-MANUAL
M. W B B
RE T URN
M. W B R
064
064
DAY&NIGHT
C_ S UP
EX I T
D& N M ODE
060
050
A_ S UP
AU T O
D&N-AUTO
DA Y >NI G HT
DW E LL TI M E
BU R ST
013
01 9
NI G HT> D AY
OF F
RE T URN
003
EX-CDS
DA Y >NI G HT
DW E LL TI M E
BU R ST
10 0
21 0
NI G HT> D AY
OF F
RE T URN
00 3
SM A RT IR
AU T O
FUNCTION
SH A RPN E SS
MI R ROR
OF F
01 8
LS C
OF F
EX I T
RE T URN
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF. When
MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AR E A SEL
MO T ION
AR E A 1
025
SE N SIT I .
OF F
DI S PLA Y
RE T URN
HO L D TIM E
AL A RM
EX I T
IC O N
ON
008
PRI V ACY:
PR I VAC Y
MA S K 2
MA S K 1
MA S K 3
OF F
MA S K 4
RE T URN
MA S K 5
MA S K 6
MA S K 7
MA S K 8
EX I T
OF F
OF F
OF F
OF F
OF F
OF F
OF F
SETUP:
1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set TITLE
by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MA N UAL D P C
TI T LE
OFF
AU T O AU T O DPC
OF F
OL P F
RE T URN
OS D C OLO R
EX I T
85 0
BL U E
US E R TIT L E
CLR POS RET
A B C D E F G H IJK L M N OP
QR
S TUV W X Y Z 01 2 345
678 9 ! # $%&( ) *+
,./< > ?@[ ] ^_
=\
_
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AU T O DPC - AUT O
DP C R UN
DP C L EVE L
RE T URN
02 9
MA N UAL D P C-M A NUA L
BL A CK TH R
WH I TE TH R
DP C L EVE L
16 8
RE T URN
06 5
05 0
SYS T EM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons. Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and
BAUDRATE. Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SY S TEM
CO M MUN I .
CA M ERA I D
LA N GUA G E
00 1
EX I T
OF F
EN G LIS H
RE T URN
CO M MUN I CAT I ON
BA U DRA T E
PR O TOC O L
RE T URN
PE L CO- D
96 0 0
EXIT:
1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit. Move the cursor to EXIT and exit the menu directly.
E X IT
SA V E&E X IT
FA C TOR Y S ET
EX I T
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON. When
MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 3D-DNR by left an d right buttons: OFF ; LOW; MI DDLE; HI GH.
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons: CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons:
0.45；0.6；1；other.
RE T URN
MODE2
MO N ITO R
GA M MA
0. 4 5
RE T URN