Medion Camera User manual

i
Precautions
yBefore using the camera, please ensure that you read and understand the safety
precautions described below. Always ensure that the camera is operated correctly.
yDo not aim the camera directly into the sun or other intense light sources which
could damage your eyesight.
yDo not try to open the case of the camera or attempt to modify this camera in any
way. High-voltage internal components create the risk of electric shock when
exposed. Maintenance and repairs should be carried out only by authorized service
providers.
yDo not fire the flash too close to the eyes of animals or people, especially for young
children. Eye damage may result. In particular, remain at least one meter away from
infants when using flash.
yKeep the camera away from water and other liquids. Do not use the camera with
wet hands. Never use the camera in the rain or snow. Moisture creates the danger
of electric shock.
yKeep the camera and its accessories out of the reach of children and animals to
prevent accidents or damage to the camera.
yIf you notice smoke or a strange odor coming from the camera, turn the power off
immediately. Take the camera to the nearest authorized service center for repair.
Never attempt to repair the camera on your own.
yUse only the recommended power accessories. Use of power sources not
expressly recommended for this equipment may lead to overheating, distortion of
the equipment, fire, electrical shock or other hazards.
This symbol on the device certifies that it complies with EUguidelines
onradiatedemissions. CE stands for Conformité Européenne
(European conformity).

ii
Contents
PRECAUTIONS I
GETTING STARTED 1
USING THIS MENU 1
UNPACKING 2
PARTS OF THE CAMERA 3
INSERTING THE BATTERIES 5
LOW BATTERY INDICATOR 5
ABOUT BAT T E RY TYPE 5
INSERTING THE MEMORY CARD 6
ABOUT CAMERA MEMORY 6
DCF PROTOCOL 6
SETTING THE DISPLAY LANGUAGE /DATE
&TIME 7
SETTING THE DISPLAY LANGUAGE 7
SETTING THE DATE &TIME 7
USING THE LCD MONITOR 9
REC MODE 9
PLAYBACK MODE 10
CHANGING THE LCD STATUS 11
BASIC OPERATION 12
TURNING THE POWER ON AND OFF 12
POWER SAVING FUNCTION 12
CHANGING THE MODE 13
SWITCHING BETWEEN REC MODE AND
PLAYBACK MODE 13
SELECTING THE REC MODE 13
SELECTING THE ASM MODE 14
USING THE MENUS 15
REC MENU 15
SETUP MENU 16
BASIC RECORDING 19
RECORDING STILL IMAGES 19
USING THE QMODE 20
SETTING IMAGE SIZE AND QUALITY 21
USING THE ZOOM FUNCTION 22
USING THE FLASH 23
USING THE MACRO 24
USING THE SELF-TIMER &BURST 25
USING THE APERTURE PRIORITY 26
USING THE SHUTTER PRIORITY 26
USING THE MANUAL EXPOSURE 27
RECORDING MOVIE CLIPS 28
SETTING THE MOVIE SIZE 28
RECORDING AUDIO CLIPS 29
PLAYING BACK AUDIO CLIPS 29
RECORDING A VOICE MEMO 30
PLAYING BACK A VOICE MEMO 30
OTHER RECORDING FUNCTIONS 31
SETTING THE METERING 31
SETTING THE WHITE BALANCE 31
SETTING THE ISO 32
SETTING THE EXPOSURE 32
SETTING THE AEB 32
SETTING THE HIGHLIGHT 32
SETTING THE SHARPNESS 33
SETTING THE PHOTO EDIT 33
SETTING DATE STA MP 33
SETTING STABILIZER 34
SETTING FACE TRACKING 34
SETTING PHOTO FRAME 34
PLAYBACK 35
PLAYING BACK IMAGES 35
PLAYING BACK MOVIE CLIPS 35
MAGNIFYING &TRIMMING STILL IMAGES
36
VIEWING IN THUMBNAIL 37
PLAYING A SLIDE SHOW 37
DELETING FILES 38

iii
DELETING A SINGLE FILE 38
DELETING MULTIPLE FILES 39
DELETING ALL FILES 39
PROTECTING A SINGLE FILE 40
PROTECTING ALL FILES 40
PROTECTING MULTIPLE FILES 41
EDITING IMAGES 42
ROTATING STILL IMAGES 42
CHANGING THE IMAGE SIZE 42
CHANGING THE IMAGE WITH EFFECTS 43
CHOOSING THE IMAGE WITH PHOTO
FRAME 43
COPYING THE FILES 44
SETTING THE DPOF 45
CHOOSING A STA RTU P IMAGE 46
MAKING CONNECTIONS 47
CONNECTING THE CAM ERA TO A TV 47
CONNECTING THE CAM ERA TO A PC 48
USING THE CARD READER 48
CONNECTING THE CAMERA TO A
COMPUTER WITH THE USB CABLE 48
APPENDIX 49
ABOUT THE FOLDER &FILE NAME 49
FOLDER STRUCTURE 49
FILE NAMING 49
TROUBLESHOOTING 50
SPECIFICATIONS 51
FUNCTION AVAILABLE LIST 52

1
Getting Started
Using This Menu
Getting Started
This section contains information you should know before using this camera.
Basic Operation
This section explains all recording features of this camera.
Basic Recording
This section explains how to record still images, movies, and audio files.
Other Recording Functions
This section explains common operations about recording images.
Playback
This section explains playback, delete, and edit functions of still images, movies and
audio files.
Making Connections
This section tells you how to connect this camera to a computer or TV.
Appendix
This section describes the troubleshooting and the camera specification.
The meanings of the symbols used in this user's manual are explained below:
This indicates cautions that should be read before using these
functions.
This indicates the useful information when using this camera.
This indicates the reference page.
T
Ti ip ps s
C
Ca au ut ti io on n

2
Unpacking
Camera USB Cable AV Cable
Strap Software Installation
CD-ROM Quick Start Guide
yActual accessories may be different.
yDo not swing the camera around by the strap.
C
Ca au ut ti io on n

3
Parts of the Camera
1. Flash ( page 23)
2. Self-timer Lamp
3. Microphone
4. Len s
5. Zoom Button ( page 22)
yThumbnail ( page 37)
yPlayback Zoom
(page 36)
6. Playback Button
(page 13)
7. Menu Button ( page 15)
8. Operation Lamp
9. Mode Button ( page 13)
10. ASM Button ( page 14)
yDelete Button ( page 38)
11. LCD Monitor ( page 9)
12. Flash Button ( page 23)
13. SET/DISP Button
(page 11)
14. Macro Button ( page 24)

4
15. Strap Ring
16. Shutter Button
( page 19, 28)
17. Power Button ( page 12)
18. Speaker
19. USB/AV Terminal
( page 18, 48)
20. Battery Cover ( page 5)
21. Tripod Socket

5
Inserting the Batteries
Open the battery cover.
ySlide the battery cover in the
direction indicated by the
arrow.
Insert the batteries.
yInsert two AA-size batteries
with the positive (+) and
negative (-) poles matching
the directions indicated
inside the battery room.
Close the battery cover.
Low Battery Indicator
A low battery indicator appears on the LCD screen when the batteries are nearly
exhausted. Batteries should be replaced promptly when the low battery indicator
appears.
yRisk of explosion if battery is replaced by an incorrect type dispose of used
batteries according to the instructions.
yBe sure to turn off the camera power before insert or remove batteries.
yIt is recommended to use the provided battery. For other compatible batteries,
please refer to Battery types. ( page 18). Use of any other type battery is not
recommended.
yReplace all batteries at the same time. Never mix old and new batteries.
yRemove batteries if you will not be using them for a long time.
yThe camera body may feel warm after extended use. This is normal.
About Battery Type
After replacing the batteries, please check the Battery Type in the setup menu (
page 18).
1
2
3
C
Ca au ut ti io on n

6
Inserting the Memory Card
You can use SD Card with this digital camera. The memory card slot is located beneath
the battery cover, adjacent to the battery compartment.
Open the battery cover.
ySlide the battery cover in the
direction indicated by the
arrow.
Insert the card.
yInsert the card with the label
facing up and the arrow
pointing in.
yTo remove the card, gently press on the edge of the card and release it. Pull
the card out and close the battery cover.
Close the battery cover.
yIt may cause damage to the card if removed while the camera is on.
yDo not touch the connection terminals on the back side of the card.
About Camera Memory
This camera is equipped with internal memory. If the memory card is not inserted in the
camera, all images and movie clips recorded by the camera will be stored in the internal
memory. If the memory card is inserted, images and movie clips are stored on the
memory card.
DCF Protocol
The DCF protocol defines the format for image file data as well as the directory structure
for the memory card. Images that are taken by a DCF camera can be viewed on
DCF-compatible cameras from other manufacturers.
1
2
3
C
Ca au ut ti io on n
T
Ti ip ps s

7
Setting the Display Language / Date & Time
When using the camera for the first time after purchasing, be sure to choose a language
and set the date & time before using the camera.
Setting the Display Language
Turn the power on, and set the camera
to the Setup Menu ( page 16).
Select [ Language].
yPress or to select
[LANGUAGE] then press or the
SET button to launch the submenu.
Select a language.
yPress or to select a language and press or the SET button to
apply the setting.
Press the MENU button to close the menu.
Setting the Date & Time
Turn the power on, and set the camera
to the Setup Menu ( page 16).
Select [ Date & Time].
yPress or to select [Date &
Time] then press or the SET
button to launch the submenu.
Set date and time.
yPress or to change the value of the cursor located. Press or
to move the cursor between settings.
yHolding down or changes the values continuously.
yFor date stamp setting ( page 33).
1
2
3
T
Ti ip ps s
1
3
2
4