InoTec CPS 220/64 Service manual

Montage- und Betriebsanleitung
Zentralbatteriesystem
CPS 220 / 20 / J-SV / J-SKÜ
CPS 220 / 64 / J-SV / J-SKÜ
4-zeiliges Steuerteil
Mounting- and Operating Instructions
Central Battery System
CPS 220 / 20 / J-SV / J-SKÜ
CPS 220 / 64 / J-SV / J-SKÜ
4-line controller
Sicherheitstechnik GmbH


3
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
Inhalt
1. Allgemeine Hinweise 7
1.1. Symbolerklärung 7
1.2. Haftung und Gewährleistung 7
1.3. Ersatzteile 7
1.4. Entsorgung 7
1.5. Fehlerbeseitigung 7
2. Sicherheitshinweise 8
2.1. Bedienungsanleitung 8
2.2. Reparaturen 8
3. Transport und Lagerung 8
3.1. Kontrolle bei Anlieferung 8
3.2. Lagerung 8
4. Produktbeschreibung 9
4.1. CPS 220 / 64, CPS 220 / 20, CPUS 220 / 64 9
4.1.1. Aufbau der CPS 220/20 und CPS 220/64 11
4.2. CPUSB 220 / 64 / 16, CPUSB 220 / 64 / 8 – 1,
CPUSB 220 / 64 / 8 – 9, CPUSB 220 / 64 / 1 – 2A,
CPUSB 220 / 64 / 1 – 4A 14
4.2.1. Aufbau der CPUSB - Systeme 15
4.3. CPUSB 220 / 64 / 1 – 2x2,5A/24V 16
4.3.1. Aufbau 16
4.4. CPUSB 220 / 64 / 24V 17
5. Technische Daten 18
5.1. CPS 220 / 64, CPS 220 / 20, CPUS 220 / 64 18
5.2. CPUSB 220 / 64 / 16, CPUSB 220 / 64 / 8 – 1,
CPUSB 220 / 64 / 8 – 9, CPUSB 220 / 64 / 1 - 2A,
CPUSB 220 / 64 / 1 – 4A,
CPUSB 220 / 64 / 1 - 2,5A / 24V 22
5.3. CPUSB 220 / 64 / 24V 23
6. Aufstellung, Anschluss 24
6.1. Montage 24
6.1.1. CPS 220 / 20 …, CPS 220 / 64 …, CPUS 220 / 64…,
CPUSB 220 / 64 / 16, CPUSB 220 / 64 / 8 … 24
6.1.2. CPUSB 220 / 64 / 1 … 24
6.1.3. CPUSB 220 / 64 / 24V 25
6.2. Batterie 25
6.2.1. 1 Batterieschrank mit 1 Strang á 18 Blöcke 26
6.2.2. 2 Batterieschränke mit 1 Strang á 18 Blöcke 27
6.2.3. 2 Batterieschränke mit 2 Strängen á 18 Blöcke 27
6.2.4. Batteriemontage auf Batteriegestell 28
6.2.5. Batterieschränke 2000mmm 28
6.3. Elektrischer Anschluss 28
6.3.1. Systemaufbau 28
6.3.2. CPS 220 / 20 …, CPS 220 / 64 …, CPUS220 / 64 …,
CPUSB 220 / 64 / 16, CPUSB 220 / 64 / 8 … 29
6.3.2.1. Netz-Anschluss - X1 29
6.3.2.2. Gerätebus IB2 - X2 29
Contents
1. General information 7
1.1. Explanation of symbols 7
1.2. Liability and warranty 7
1.3. Spare parts 7
1.4. Disposal 7
1.5. Correction of faults 7
2. Safety instructions 8
2.1. Operating instructions 8
2.2. Repairs 8
3. Transport and storage 8
3.1. Examination on delivery 8
3.2. Storage 8
4. Product description 9
4.1. CPS 220/64, CPS 220/20, CPUS 220/64 9
4.1.1. Layout CPS 220/20 and CPS220/64 11
4.2. CPUSB 220/64/16, CPUSB 220/64/8–1,
CPUSB 220/64/8–9, CPUSB 220/64/1–2A,
CPUSB 220/64/1–4A 14
4.2.1. Layout CPUSB 15
4.3. CPUSB 220 / 64 / 1 – 2x2,5A/24V 16
4.3.1. Design 16
4.4. CPUSB 220/64/24 V 17
5. Technical data 18
5.1. CPS 220/64, CPS 220/20, CPUS 220/64 18
5.2. CPUSB 220/64/16, CPUSB 220/64/8–1,
CPUSB 220/64/8–9, CPUSB 220/64/1–2A,
CPUSB 220/64/1–4 A,
CPUSB 220 / 64 / 1 - 2,5A / 24V 22
5.3. CPUSB 220/64/24 V 23
6. Assembly, connection 24
6.1. Assembly 24
6.1.1. CPS 220/20 …, CPS 220/64 …, CPUS 220/64 …,
CPUSB 220/64/16, CPUSB 220/64/8 … 24
6.1.2. CPUSB 220/64/1 … 24
6.1.3. CPUSB 220/64/24 V 25
6.2. Battery 25
6.2.1. 1 battery cabinet with 1 battery set,
18 blocks each 26
6.2.2. 2 battery cabinets with 1 battery set,
18 blocks each 27
6.2.3. 2 battery cabinets with 2 battery sets,
18 blocks each 27
6.2.4. Mounting on battery rack 28
6.2.5. 2000 mm battery cabinets 28
6.3. Electrical connection 28
6.3.1. System structure 28
6.3.2. CPS 220/20 …, CPS 220/64 …, CPUS220/64 …,
CPUSB 220/64/16, CPUSB 220/64/8 … 29
6.3.2.1. Network connection — X1 29
6.3.2.2. Device bus IB2 — X2 29

4
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
4
6.3.2.3. Externer Datenbus RTG - X2 29
6.3.2.4. Weitere Baugruppen - X2 30
6.3.2.5. Endstromkreise - X3 30
6.3.2.6. Endstromkreise CP 24V 2x2,5A - X7 30
6.3.2.7. Endstromkreise CP D.E.R. - X14 31
6.3.2.8. Batterieanschluss 31
6.3.2.9. Stromkreisumschaltungen CP 4x2A / CP2x4A/
CP 1x6A in Jokertechnik 31
6.3.2.10. Stromkreisumschaltungen CP 2x2,5A / 24V 32
6.3.2.11. Stromkreisumschaltung CP D.E.R. 2x2,5A 33
6.3.3. CPUSB 220 / 64 / 1 … 34
6.3.3.1. Versorgungsspannung 35
6.3.3.2. Gerätebus IB2 35
6.3.3.3. Stromkreise 35
6.3.3.4. Stromschleife 35
6.3.3.5. Stromkreisweiche (SKW) 36
6.3.3.6. Adressierung 36
6.3.4. CPUSB 220 / 64 / 24V 37
6.3.4.1. Netzanschluss 37
6.3.4.2. Gerätebus IB2 38
6.3.4.3. Endstromkreise 38
6.3.4.4. Lichtschalterabfrage 39
6.3.4.5. 24V-Stromschleife 39
6.3.4.6. Zentrales Dimmen 40
6.3.5. Zusätzliche Komponenten 40
6.3.5.1. RIF 5 40
6.3.5.2. Batteriemanagementsystem BCS 44
6.3.5.2.1. BCS Sensor 45
6.3.5.2.2. BCS-Modul 45
6.3.5.3. LSA 3 / LSA 8.1 48
6.3.5.3.1. LSA 3 48
6.3.5.3.2. LSA 8.1 49
6.3.5.4. Dreiphasenüberwachungen 52
6.3.5.4.1. DPÜ 52
6.3.5.4.2. DPÜ/B.2 53
6.3.5.4.3. DPÜ/B.1 55
6.3.5.5. LOMO 57
6.3.5.6. Fernmeldetableau – MTB 58
6.3.5.7. CPS-MTB 59
6.3.5.8. INOWEB 60
6.3.5.9. Phasenauswahlschaltung – PAS 60
7. Inbetriebnahme 61
7.1. Überprüfung der Verbindungen 61
7.2. Isolationsmessung 61
7.3. Einschalten des Zentralbatteriesystems 62
7.4. Ausschalten des Zentralbatteriesystems 62
6.3.2.3. External databus RTG — X2 29
6.3.2.4. Additional devices — X2 30
6.3.2.5. Final circuits — X3 30
6.3.2.6. Final circuits CP24V 2x2,5A - X7 30
6.3.2.7. Final circuits CP D.E.R. - X14 31
6.3.2.8. Battery connection 31
6.3.2.9. Change-over devices CP 4x2 A/CP 2x4 A/
CP1x6A in Joker technology 31
6.3.2.10. Change-over devices CP 2x2.5A / 24V 32
6.3.2.11. Change-over devices CP D.E.R. 2x2.5A 33
6.3.3. CPUSB 220/64/1 … 34
6.3.3.1. Supply voltage 35
6.3.3.2. Device bus IB2 35
6.3.3.3. Circuits 35
6.3.3.4. Current loop 35
6.3.3.5. Circuit separating module (SKW) 36
6.3.3.6. Addressing 36
6.3.4. CPUSB 220/64/24 V 37
6.3.4.1. Mains supply 37
6.3.4.2. Device bus IB2 38
6.3.4.3. Final circuits 38
6.3.4.4. Light sequence switching 39
6.3.4.5. 24 V current loop 39
6.3.4.6. Central dimming 40
6.3.5. Additional components 40
6.3.5.1. RIF 5 40
6.3.5.2. Battery management system BCS 44
6.3.5.2.1. BCS sensor 45
6.3.5.2.2. BCS-Modul 45
6.3.5.3. LSA 3 / LSA 8.1 48
6.3.5.3.1. LSA 3 48
6.3.5.3.2. LSA 8.1 49
6.3.5.4. Three-phase monitors (DPÜs) 52
6.3.5.4.1. DPÜs 52
6.3.5.4.2. DPÜ/B.2 53
6.3.5.4.3. DPÜ/B.1 55
6.3.5.5. LOMO 57
6.3.5.6. Remote mimic panel — MTB 58
6.3.5.7. CPS-MTB 59
6.3.5.8. INOWEB 60
6.3.5.9. Phase selector switch — PAS 60
7. Commissioning 61
7.1. Checking the connections 61
7.2. Insulation measuring 61
7.3. Energising the central battery system 62
7.4. De-energise the central battery system 62

5
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
8. 4-zeiliges Steuerteil 63
8.1. Allgemeines 63
8.2. Testmenü 64
8.2.1. Funktionstest starten 64
8.2.2. Betriebsdauertest starten 64
8.2.3. Learn-Mode 64
8.2.3.1. Learn Mode SV-Stromkreise 64
8.2.3.2. Learn Mode SKÜ-Stromkreise 64
8.2.4. Tiefentladeschutz prüfen 65
8.2.5. Isolationstesteinrichtung prüfen 65
8.2.6. Funktionstest abbrechen 65
8.2.7. Betriebsdauertest abbrechen 66
8.3. Info 66
8.3.1. Geräteinformationen 66
8.3.1.1. Stromkreisinformationen 66
8.3.1.2. Ladekreis Info 67
8.3.1.3. Steuerteil Info 67
8.3.1.3.1. Ausdruck Anlagenkonguration 68
8.3.2. Störungs Info 68
8.3.3. Prüfbuch 69
8.3.3.1. Prüfbuch löschen 69
8.3.3.2. Prüfbuch anzeigen 69
8.3.3.3. Prüfbuch drucken 69
8.3.4. Netzausfall UV Info 70
8.4. Programmierung 70
8.4.1. Datum und Uhrzeit 70
8.4.2. Programmierung 71
8.4.2.1. Testzeitpunkte 71
8.4.2.1.1. Automatischer Funktionstest 71
8.4.2.1.2. Automatischer Betriebsdauertest 71
8.4.2.2. INOSTICK 72
8.4.2.2.1. Konguration laden 72
8.4.2.2.2. Konguration speichern 72
8.4.2.3. Programmierung 73
8.4.2.3.1. Ladeteil programmieren 73
8.4.2.3.2. Steuerteilprogrammierung 73
8.4.2.3.3. Stromkreisprogrammierung 78
9. INOWEB 81
9.1. Bedienung 81
9.2. Störungsausdruck 82
9.3. Externe Verknüpfungen 83
9.3.1. Einrichtung externer Verknüpfungen 83
9.3.2. INOWeb E-Mail Setup 85
10. Programmierung CPUSB 220/64/24 88
10.1. Bedienung und Menüstruktur 88
10.2. „Testmenü“ 89
10.2.1. Funktionstest 89
8. 4-line controller 63
8.1. General 63
8.2. Test menu 64
8.2.1. Running a function test 64
8.2.2. Starting battery duration test 64
8.2.3. Learn mode 64
8.2.3.1. Learn mode SV circuits 64
8.2.3.2. Learn Mode SKÜ circuits 64
8.2.4. Checking deep discharge protection 65
8.2.5. Checking insulation testing device 65
8.2.6. Cancelling a function test 65
8.2.7. Cancelling battery duration test 66
8.3. Info 66
8.3.1. Device information 66
8.3.1.1. Circuit info 66
8.3.1.2. Charging circuit info 67
8.3.1.3. Controller info 67
8.3.1.3.1. Conguration printout 68
8.3.2. Failure info 68
8.3.3. Logbook 69
8.3.3.1. Delete logbook 69
8.3.3.2. Display logbook 69
8.3.3.3. Print logbook 69
8.3.4. Sub-DB failure info 70
8.4. Programming 70
8.4.1. Date and time 70
8.4.2. Programming 71
8.4.2.1. Testing times 71
8.4.2.1.1. Automatic function test 71
8.4.2.1.2. Automatic battery duration test 71
8.4.2.2. INOSTICK 72
8.4.2.2.1. Load conguration 72
8.4.2.2.2. Save conguration 72
8.4.2.3. Programming 73
8.4.2.3.1. Charger programming 73
8.4.2.3.2. Controller programming 73
8.4.2.3.3. Circuit programming 78
9. INOWEB 81
9.1. Operation 81
9.2. Failure printout 82
9.3. External links 83
9.3.1. Conguring external links 83
9.3.2. INOWeb E-Mail Setup 85
10. Programming CPUSB 220/64/24 88
10.1. Operation and menu structure 88
10.2. „Test menu“ 89
10.2.1. Function test 89

6
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
6
10.3. „Programmierung“ 89
10.3.1. Geräteeinstellungen 89
10.3.1.1. Unterstation 89
10.3.1.2. Relais Programmierung 90
10.3.1.3. SL mit SLÜ 90
10.3.1.4. FS mit SLÜ 90
10.3.2. Stromkreise programmieren 90
10.3.3. Leuchten programmieren 91
10.3.3.1. Bereitschaftslicht (BL) 92
10.3.3.2. Dauerlicht (DL) 92
10.3.3.3. Geschaltetes Dauerlicht (gDL) 92
10.3.3.4. Zentrales Dimmen (Dim) 92
10.3.4. Spracheinstellung 92
10.3.5. Passwort ändern 93
10.4. „Informationen“ 93
10.4.1. Geräteinformation 93
10.4.2. Stromkreisinformation / Leuchteninformation 93
10.4.3. Störungsinformationen 93
10.5. Block. Aufheben 94
11. Prüfungen 94
11.1. Erstprüfungen 94
11.2. Wiederkehrende Prüfungen der elektrischen Anlagen
für Sicherheitszwecke 94
11.2.1. Tägliche Prüfungen 94
11.2.2. Wöchentliche Prüfung 95
11.2.3. Monatliche Prüfungen 95
11.2.4. Halbjährliche Prüfungen 95
11.2.5. Jährliche Prüfungen 95
11.2.6. 3-jährige Prüfungen 95
11.3. Batterieinspektion und –überwachung 96
11.4. Protokolle zu wiederkehrenden
Prüfungen 96
Anhang 97
Dokumentation 97
Leitungslängen 97
Kundendienst 98
Softwarestand 98
Index 99
10.3. „Programming“ 89
10.3.1. Program device 89
10.3.1.1. Sub station 89
10.3.1.2. Relay programming 90
10.3.1.3. SL with SLÜ 90
10.3.1.4. RS with SLÜ 90
10.3.2. Program circuits 90
10.3.3. Program luminaires 91
10.3.3.1. Non-maintained li ghting (NM) 92
10.3.3.2. Maintained lighting (ML) 92
10.3.3.3. Switched maintained lighting (SL) 92
10.3.3.4. Central dimming (Dim) 92
10.3.4. Language 92
10.3.5. Change password 93
10.4. „Info“ 93
10.4.1. Device info 93
10.4.2. CI/Lum info 93
10.4.3. Failure information 93
10.5. Device block 94
11. Tests 94
11.1. Initial tests 94
11.2. Recurring safety tests on electrical systems 94
11.2.1. Daily tests 94
11.2.2. Weekly test 95
11.2.3. Monthly tests 95
11.2.4. Six-monthly tests 95
11.2.5. Annual tests 95
11.2.6. Three-year checks 95
11.3. Battery inspection and monitoring. 96
11.4. Protocols for repeat tests 96
Appendix 97
Documentation 97
Wire lengths 97
Customer Service 98
Software version 98
Index 99

7
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
1. Allgemeine Hinweise
1.1. Symbolerklärung
Sicherheitsrelevante Informationen sind durch
nebenstehendes Symbol gekennzeichnet. Eine
Nichtbefolgung der Anweisungen kann zu Per-
sonenschäden oder defektem Gerät führen!
Hinweise liefern wichtige Informationen und
sind mit einem gelben Symbol markiert. Bitte
lesen Sie diese sehr aufmerksam.
Dieses Symbol macht Sie auf zusätzliche Infor-
mationen aufmerksam.
1.2. Haftung und Gewährleistung
INOTEC übernimmt keine Gewährleistung oder Haftung
für Schäden oder Folgeschäden, die entstehen durch
• Nicht bestimmungsgemäßen Gebrauch
• Nichteinhaltung von Vorschriften für den sicheren
Betrieb
• Betrieb von nicht zugelassenen oder ungeeigneten
Komponenten am Notlichtsystem
• Bei fehlerhafter Installation
• Bei Eingri in das Gerät
1.3. Ersatzteile
Defekte Bauteile dürfen nur gegen INOTEC-Original-
Ersatzteile ausgetauscht werden. Nur bei diesen Teilen
gewährleisten wir, dass Sie die Sicherheitsanforderun-
gen im vollen Umfang erfüllen. Garantie-, Service- und
Haftpichtansprüche erlöschen bei Verwendung nicht
geeigneter Ersatzteile.
Der Einsatz von fehlerhaften Ersatzteilen kann zu
fehlerhaftem Betrieb oder einem nicht funktionie-
rendem System führen.
1.4. Entsorgung
Von INOTEC gelieferte Batterien und Elektronikbau-
teile können an INOTEC zurückgegeben werden
oder sind gemäß den nationalen Richtlinien und
Vorschriften für die Entsorgung von Alt-Batterien
und Elektronikbauteilen zu entsorgen.
1.5. Fehlerbeseitigung
Nach jeder Fehlerbeseitigung der angeschlossenen
Leuchten muss ein Funktionstest ausgelöst werden,
um den angezeigten Fehler zu löschen.
siehe 8.2.1. Funktionstest starten - Seite 64
1. General information
1.1. Explanation of symbols
This symbol highlights important information
that also concerns safety. Failure to follow
theinstructions may result in physical injury
orbreakage!
Instructions marked by a yellow icon provide
important information. Please read these very
carefully.
This icon provides additional information.
1.2. Liability and warranty
INOTEC does not accept any responsibility or liability
whatsoever for damage or consequential damage caused
by:
• Failure to operate devices according to their intended use
• Failure to follow instructions relating to safe operation
• The use of unauthorised or unsuitable components in
conjunction with the emergency lighting system
• Faulty installation
• Opening the device
1.3. Spare parts
Defective components must only be replaced with
original INOTEC spare parts. We cannot guarantee that
safety requirements are fully met if parts other than these
are used. No warranty, service or liability claims will be
acknowledged if unsuitable spare parts are used.
The use of defective spare parts may result in mal-
function or cause the system to fail entirely.
1.4. Disposal
Batteries and electronic components supplied by
INOTEC can be returned to INOTEC or should be
disposed of in accordance with the national gui-
delines and regulations governing the disposal of
used batteries and electronic components.
1.5. Correction of faults
Whenever a fault associated with connected lumi-
naires is corrected, a function test must becarried
out to reset the fault indication.
see 8.2.1. Running a function test on page 64

8
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
8
2. Sicherheitshinweise
Die Installation darf nur durch Elektrofachkräfte
erfolgen.
Das Gerät ist bestimmungsgemäß und nur im einwand-
freien, unbeschädigten Zustand zu betreiben.
Für die Installation und den Betrieb dieses Gerätes sind
die nationalen Sicherheits- und Unfallverhütungsvor-
schriften zu beachten.
Vor Arbeiten an dem Gerät, insbesondere beim Austausch
von Baugruppen, ist die Anlage spannungsfrei zu schalten
(Netz- und Batteriespannung)!
siehe 7. Inbetriebnahme - Seite 61
2.1. Bedienungsanleitung
Lesen Sie vor der Montage und Inbetriebnahme
die Montage- und Betriebsanleitung. Sie gibt
wichtige Informationen für die Sicherheit, den
Gebrauch und die Wartung des Gerätes. Dadurch schüt-
zen Sie sich und verhindern Schäden am Gerät.
2.2. Reparaturen
Eventuelle Reparaturen oder Eingrie dürfen
ausschließlich durch INOTEC autorisierte Personen
vorgenommen werden. Eingrie durch andere Personen
führen zum Verlust der Gewährleistung.
3. Transport und Lagerung
3.1. Kontrolle bei Anlieferung
Überprüfen Sie das Gerät bei Anlieferung unverzüglich
auf Vollständigkeit und äußere Beschädigungen. Melden
Sie dem Spediteur oensichtliche Beschädigungen sofort,
da wir spätere Reklamationen nicht anerkennen.
3.2. Lagerung
Das Gerät ist bis zur Montage wie folgt zu lagern:
• Nicht im Freien aufbewahren
• Trocken und staubfrei lagern
Für die Batterien gilt:
• Batterien dürfen max. 3 Monate ohne Ladung gelagert
werden
• Bei längerer Unterbrechung der Netzversorgung muss
der Batteriekreis durch entfernen der Batteriesicherung
gemäß Betriebsanleitung freigeschaltet werden
siehe 7. Inbetriebnahme - Seite 61
• Vor der ersten Funktionsprüfung sind die Batterien min.
24 Stunden zu laden
2. Safety instructions
Installation should only be carried out by qualied
and trained electricians.
The device must not be used for anything other than its
intended purpose and only in a perfect and undamaged
condition.
When installing and operating this device, please follow
your national safety and accident prevention regulations
at all times.
Before carrying out any work on the device, in particular
when replacing components, always disconnect the sys-
tem from the power source (mains and battery)!
see 7. Commissioning on page 61
2.1. Operating instructions
Always read the mounting and operating instruc-
tions before installing and commissioning the
device. These instructions contain important
information on the safety, use and maintenance of the
device, and will protect you and prevent damage to
thesystem.
2.2. Repairs
Any repairs which need to be carried out or which
involve opening the device must ONLY be carried out by
personnel authorised to do so by INOTEC. The guarantee
becomes invalid if unauthorised personnel work on the
system.
3. Transport and storage
3.1. Examination on delivery
Please examine the device carefully at the point of receipt
to ensure complete delivery and that no external damage
exists. Please inform the carrier immediately if there are
any signs of damage — we regret that we are unable to
acknowledge complaints submitted after this point.
3.2. Storage
Until assembly, please observe the following regarding
storage of the device:
• Do not store in the open air
• Do store in a dry, dust-free environment
The following applies to batteries that have already been
tted:
• Batteries must not be stored for more than 3 months
without being charged
• If the mains supply is interrupted for an extended
period of time, the battery circuit must be disconnected
by removing the battery fuse in accordance with the
operating instructions
see 7. Commissioning on page 61
• Charge the batteries for at least 24 hours before carrying
out the initial function test

9
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
4. Produktbeschreibung
Die Zentralbatteriesysteme CPS 220 / 20 und CPS 220 / 64
sind ein batteriegestütztes Überwachungs- und Versor-
gungsgerät für den Notlichtbetrieb von Sicherheits- und
Rettungszeichenleuchten. Die im Gerät integrierte und
patentierte Jokertechnik ermöglicht den gleichzeitigen
Betrieb von Dauer- und Bereitschaftsleuchten an einem
Stromkreis.
Eine modulare Aufbauweise und die Möglichkeit, das
System durch Unterstationen und BUS-Unterstationen
zu erweitern, bietet für jede Anforderung eine optimale
Lösung.
4.1. CPS 220 / 64, CPS 220 / 20, CPUS 220 / 64
Die Zentralbatteriegeräte CPS 220 / 64 und CPS 220 / 20
sind mit ihrer integrierten Ladeeinrichtung der Hauptbe-
standteil des Zentralbatteriesystems. Aufbauend auf diese
Gerätetypen kann durch Einsatz der Unterstation CPUS
220 / 64 die maximal anschließbare Leistung entspre-
chend erhöht werden.
Der Einsatz unterschiedlicher Stromkreismodule (mit 2A,
4A und 6A), welche wahlweise innerhalb des Gerätes oder
auch extern angeordnet werden können, ermöglicht für
jede Anforderung eine optimale Lösung. Die Versorgung
der externen Stromkreismodule erfolgt über eine gesi-
cherte dreiadrige Versorgungsleitung und eine dreiadrige
Busleitung. Das Stromkreismodul schaltet bei Ausfall der
Busleitung umgehend in den sicheren Betrieb (BL Ein).
Die Schaltungsart für jeden einzelnen Stromkreis kann
über das integrierte Steuerteil frei programmiert werden:
• Dauerlicht
• Bereitschaftslicht
• Geschaltetes Dauerlicht
• Jokerbetrieb
• Geschalteter Jokerbetrieb
Ebenso ist für jeden Stromkreis die Überwachungsart (Un-
überwacht, Stromkreis-, Einzelleuchtenüberwachung) frei
programmierbar. An jedem Stromkreis können bis zu 20
Leuchten angeschlossen und einzeln überwacht werden.
In der maximalen Ausbaustufe überwacht das Steuerteil
somit bei max. 128 Stromkreisen bis zu 2.560 Leuchten.
Eine Kommunikation der Stromkreise mit den Leuchten
geschieht ohne eine zusätzliche Datenleitung. Bei Joker-
betrieb wird die Schaltungsart (Bereitschafts- oder Dau-
erlicht) an dem Leuchtenmodul über einen Mikroschalter
vergeben. Die entsprechende Leuchtenadresse wird an
den Adressschaltern des Moduls vergeben. Über einen
optionalen Senseeingang am Leuchtenmodul besteht die
Möglichkeit die Leuchten lokal zu schalten.
Die Bedienung der Zentralbatteriesysteme CPS 220 / 64
und CPS 220 / 20, sowie der CPUS 220 / 64 erfolgt über
das integrierte TFT Steuerteil. Die Programmierung des
Gerätesteuerteils erfolgt über die komfortable INOTEC
Kongurator Software mittels USB Speichermedium oder
direkter Verbindung über eine LAN-Schnittstelle. Das
TFT Steuerteil bietet die Möglichkeit, Textinformationen
zu Einschüben, Modulen und Leuchten zu speichern.
4. Product description
The central battery systems CPS 220/20 and CPS 220/64
are battery-supported monitoring and supply devices for
the emergency lighting operation of safety and emergen-
cy exit luminaires. The patented ‘Joker’technology integ-
rated into the device enables simultaneous operation of
maintained and non-maintained lighting on one circuit.
A modular structure and the option of expanding the
system with sub stations and BUS sub stations oer an
optimised solution for every requirement.
4.1. CPS 220/64, CPS 220/20, CPUS 220/64
The central battery devices CPS 220/64 and CPS 220/20,
with their integrated charging system, are the main
component of the central power system. The use of sub
station CPUS 220/64 with these device types allows the
maximum connectable power to be increased accordin-
gly.
The use of various circuit modules (with 2 A, 4 A und 6 A),
which can be arranged either within the device or exter-
nally, oers an optimised solution for every requirement.
The external circuit modules are supplied via a fused
three-wire supply lead and a three-wire BUS data line. If
the BUS data line fails, the circuit module switches to safe
mode (NM On) immediately.
The operation mode for each individual circuit can be
freely programmed via the integrated controller:
• Maintained lighting
• Non-maintained lighting
• Switched maintained lighting
• Joker operation
• Switched Joker operation
For each circuit, the type of monitoring (unmonitored, cir-
cuit monitoring, individual luminaire monitoring) can also
be programmed in accordance with your requirements.
Up to 20 luminaires can be connected to each circuit and
individually monitored. At the maximum expansion stage,
the controller thus monitors up to 2560 luminaires on a
maximum of 128 circuits.
The circuits communicate with the luminaires without an
additional data line. During joker operation, the operation
mode (non-maintained or maintained lighting) is assig-
ned to the luminaire module via a microswitch. The cor-
responding luminaire address is assigned to the address
switches of the module. An optional sense input on the
luminaire module enables the luminaires to be switched
locally.
The central battery systems CPS 220/64 and CPS 220/20,
and the CPUS 220/64, are operated via the integrated
controller. The controller unit can be programmed with
the comfortable “INOTEC Kongurator” software. To trans-
fer the conguration a USB pen drive or LAN interface can
be used. The TFT controller provides the option of saving
text information on change-over devices, modules and lu-
minaires. The programmed conguration is stored in the
non-volatile memory and is retained even if the power
supply system fails.

10
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
10
Die Programmierung wird im nicht-üchtigen Speicher
abgelegt und bleibt auch bei Ausfall der Spannungsver-
sorgung erhalten.
Jederzeit können manuelle Tests zur Überprüfung ausge-
löst werden. Ebenso sind automatische Tests zu frei pro-
grammierbaren Zeitpunkten möglich. Die Testergebnisse
und Statusänderungen werden im integrierten Prüfbuch
detailliert gespeichert und sind jederzeit abrufbar. Das
Prüfbuch ist im nicht-üchtigen Speicher abgelegt und
somit bleiben die Einträge auch nach einem Spannungs-
ausfall erhalten.
Ein Meldemodul für potentialfreie Meldekontakte ist
standardmäßig im Zentralbatteriesystem eingebaut und
liefert bis zu fünf Statusinformationen (Betrieb, Batte-
riebetrieb, Störung, Optional 1, Optional 2). Über dieses
Meldemodul kann das Zentralbatteriesystem auch von
zentraler Stelle blockiert werden. Bei Einsatz eines MTBs
erfolgt dieses über den im MTB integrierten Schlüssel-
schalter.
Die Zentralbatteriesysteme CPS 220 / 64 und CPS220/
20, sowie die Unterstation CPUS 220 / 64 können mit
optionalen Modulen um folgende Funktionen erwei-
tert werden:
• Anschluss von Dreiphasenüberwachungen (DPÜ) zur
Überwachung des allgemeinen Versorgungsnetzes
bzw. dessen Unterverteilern. Bei Ausfall einer Phase
schaltet das Zentralbatteriesystem die Notbeleuchtung
ein. Der Anschluss bei der DPÜ ohne Busanbindung
erfolgt über eine 24 V Stromschleife, welche sowohl
auf Unterbrechung als auch (optional) auf Kurzschluss
überwacht wird. Die DPÜ/B mit Busanbindung kann
den Ausfall einer Phase über Stromschleife oder mittels
Busanbindung an das Zentralbatteriesystem melden. In
der Meldung an das Zentralbatteriesystem ist die DPÜ-
Adresse und ausgefallene Phase enthalten.
• Lichtschalterabfragemodule ermöglichen entsprechend
programmierte Stromkreise mittels Lichtschalter zu
schalten. Die Anbindung erfolgt über den dreiadrigen
Systembus. Die Zentralbatteriesysteme unterstützten
maximal 3 Stück LSA 8 mit 8 Schalteingängen und 8 Stück
LSA 3 mit drei Schalteingängen. Die LSA-Module sind in
Versionen mit 24V- und 230V-Eingängen verfügbar.
• Mittels INOLAN besteht die Möglichkeit der zentralen
Überwachung des Systems mittels Netzwerk. Die
INOWeb Funktionalität ist nur in Verbindung mit
dem TFT-Steuerteil möglich, diese Schnittstelle ist
serienmäßig integriert.
Je nach Projektanforderung sind die Zentralbatterie-
systeme CPS 220 / 64 und CPS 220 / 20 und die CPUS
220 / 64 in unterschiedlichen Ausbaustufen verfüg-
bar:
• CPS 220 / 20 / 1,2A, CPS 220 / 20 / 3A
Maximale Anschlussleistung von 1,5kW mit 5
Modulplätzen für bis zu 20 Stromkreise. Keine
Anschlussmöglichkeit für externe Stromkreismodule.
Manual tests for checking can be activated at any time.
Automatic tests can also be run at freely programmable
times. The test results and status changes are detailed in
the integrated logbook and can be retrieved at any time.
The logbook is stored in the non-volatile memory, which
means that the entries are retained even after a power
failure.
A signalling module for volt-free signalling contacts is
built into the central battery system as standard and
delivers up to ve status messages (operation, battery
operation, fault, option 1, option 2). Via this signalling mo-
dule, the central battery system can also be blocked from
a central position. If an MTB is used, this is done using the
key switch integrated into the MTB.
Optional modules can be used to enhance the central
battery systems CPS 220/64 and CPS 220/20, as well
as the sub station CPUS 220/64, with the following
functions:
• Connection of three-phase monitors (DPÜ) for
monitoring the general supply network and/or its sub-
distribution boards. Should one phase fail, the central
battery system switches on the emergency lighting.
The connection on the DPÜ without bus connection
is via a 24 V current loop, which is monitored for both
interruption and also (optionally) for short circuits. The
DPÜ/B with bus connection can report the failure of a
phase to the central battery system via current loop or
by bus connection. The message to the central battery
system contains the DPÜ address and failed phases.
• Light sequence switching modules allow programmed
circuits to be switched via light switches. The connection
is via the three-wire system bus. The central battery
system supports a maximum of 3 LSA 8 with 8 input
switches and 8 LSA 3 with three input switches. The
LSAmodules are available in versions with 24 V and
230 V inputs.
• Optionally the system can be monitored via
network(INOLAN). The INOWeb function can only be
used with the TFT Touch controller, the interface is
integrated.
Depending on project requirements, the central
battery systems CPS 220/64 and CPS 220/20 and CPUS
220/64 are available in various expansion levels:
• CPS 220/20/1.2 A, CPS 220/20/3 A
Maximum connected output of 1.5 kW with 5 module
slots for up to 20 circuits. No connectivity for external
circuit modules.

11
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
• CPS 220 / 20 / 5,5kW / 3A, CPS 220 / 20 / 5,5kW / 7,5A
Maximale Anschlussleistung 5,5kW mit 5 internen
Modulplätzen für bis zu 20 Stromkreise und 16 externe
Modulplätze zum Anschluss von bis zu weiteren 64
Stromkreisen.
• CPS 220 / 64 / 11kW-1, CPS 220 / 64 / 11kW-2, CPS
220 / 64 / 11kW-1/3-phasig
Maximale Anschlussleistung 11kW mit 16 internen
Modulplätzen und 16 externen Modulplätzen für
maximal 128 Stromkreise. Ausführungen in 1- und
3-phasig mit ein oder zwei Ladeteilen mit 3A bzw. 7,5A.
• CPS 220 / 64 / 11kW 3-phasig, CPS 220 / 64 / 22kW
3-phasig
3-phasige Ausführungen im 2m-Schrank mit 11kW
bzw. 22kW maximaler Anschlussleistung für bis zu 4
Ladeteilen im Schrank eingebaut. 16 interne und 16
externe Modulplätze für bis zu 128 Stromkreise.
• CPUS 220 / 64 / 11kW
Unterstation mit eigener Steuereinheit für maximal
11kW ohne Ladeeinrichtung. 16 interne und 16 externe
Modulplätze für bis zu 128 Stromkreise.
Weitere Informationen zu den unterschiedlichen Versio-
nen sind im Kapitel„Technische Daten“ zu nden.
siehe 5. Technische Daten - Seite 18
4.1.1. Aufbau der CPS 220/20 und CPS 220/64
CPS 220/20
1
2
3
4
CP 4x2A
F
3,15 A
= BL / NM
= DL / M
F
3,15 A
F
3,15 A
F
3,15 A
1
2
3
4
CP 4x2A
F
3,15 A
= BL / NM
= DL / M
F
3,15 A
F
3,15 A
F
3,15 A
1
2
3
4
CP 4x2A
F
3,15 A
= BL / NM
= DL / M
F
3,15 A
F
3,15 A
F
3,15 A
1
2
3
4
CP 4x2A
F
3,15 A
= BL / NM
= DL / M
F
3,15 A
F
3,15 A
F
3,15 A
1
2
3
4
CP 4x2A AIF CPS 220/20 LT 220V / 1,2A
DC –
AC ~
I
3,15A
AC ~
3,15A
U
F
3,15 A
= BL / NM
= DL / M
F
3,15 A
F
3,15 A
F
3,15 A
Achtung!! Sicherungen im Gerät nicht unter Last z iehen.
Anlage blockieren.
Batteries icherung
10A
10A
hinter d er Blende
DC –
850009
850008
Netz
Ladeteil 220V/7,5A
Ein
10AT16AT
Batterie
Menue
USB
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
LT 220V / 1,2AAIF CPS 220/20
DC-
DC-
3,15 A
AC~
AC~
3,15 A
850009
850008
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
LT 220V / 1,2AAIF CPS 220/20
DC-
DC-
3,15 A
AC~
AC~
3,15 A
Stromkreismodule
Circuit modules
Steuerteil
Controller
Ladeteil
Charger
Batteriesicherungen
Battery fuses
CPS 220 / 20 / 1,2A CPS 220 / 20 / 3A
CPS 220 / 20 / 7,5A
CPS 220 / 20 / 5,5kW / 3A
CPS 220 / 20 / 5,5kW / 7,5A
Klemmen /Anschlußraum
Terminals
• CPS 220/20/5.5 kW/3 A, CPS 220/20/5.5 kW/7.5 A
Maximum connected output 5.5 kW with 5 internal
module slots for up to 20 circuits and 16 external
module slots for connecting up to 64 circuits.
• CPS 220/64/11 kW-1, CPS 220/64/11 kW-2,
CPS220/64/11 kW-1/3-phase
Maximum connected output 11 kW with 16 internal
module slots and 16 external module slots for maximum
128 circuits. Single and 3-phase versions with one or two
3 A or 7.5 A chargers.
• CPS 220/64/11 kW 3-phase, CPS 220/64/22 kW
3-phase
3-phase versions integrated into the 2 m cabinet with
11 kW or 22 kW maximum connected output for up to
4 chargers in the cabinet. 16 internal and 16 external
module slots for up to 128 circuits.
• CPUS 220/64/11 kW
Sub station with integrated controller for maximum
11kW without charging system. 16 internal and
16external module slots for up to 128 circuits.
Additional information on the dierent versions can be-
found in the Technical data section.
see 5. Technical data on page 18
4.1.1. Layout CPS 220/20 and CPS220/64

12
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
12
850009
850008
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
Netz
Ladeteil 220V/7,5A
Ein
10AT16AT
Batterie
Netz
Ladeteil 220V/7,5A
Ein
10AT16AT
Batterie
850009
850008
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
Netz
Ladeteil 220V/7,5A
Ein
10AT16AT
Batterie
Sicherungsabgänge
US Netz/ Batt
Substation output
Batteriesicherungen
Battery fuses
Steuerteil
Controller
Ladeteil
Charger
Netzanschluß
Mains
Klemmen /Anschlußraum
Terminals
CPS 220 / 64 / 11kW CPS 220 / 64 / 11kW-2
Stromkreismodule
Circuit modules
850009
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
Netz
Ladeteil 220V/7,5A
Ein
10AT16AT
Batterie
Klemmen Anschlußraum
Terminals
Steuerteil
Controller
Ladeteil
Charger
Sicherungsabgänge
BUS-Unterstationen
BUS Substation output
Batteriesicherungen
Battery fuses
CPS 220 / 64 / 11kW - 3 phase
Stromkreismodule
Circuit modules
Netzanschluß
Mains

13
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
Netz
Ladeteil 220V/7,5A
Ein
10AT16AT
Batterie
Netz
Ladeteil 220V/7,5A
Ein
10AT16AT
Batterie
Netz
Ladeteil 220V/7,5A
Ein
10AT16AT
Batterie
850009
850008
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
Netz
Ladeteil 220V/7,5A
Ein
10AT16AT
Batterie
Netz
Ladeteil 220V/7,5A
Ein
10AT16AT
Batterie
Netz
Ladeteil 220V/7,5A
Ein
10AT16AT
Batterie
Netz
Ladeteil 220V/7,5A
Ein
10AT16AT
Batterie
850009
850008
Steuerteil
Controller
Ladeteile
Charger
Netzanschluß
Mains
Netzanschluß
Mains
Batteriesicherungen
Battery fuses
Batteriesicherungen
Battery fuses
CPS 220 / 64 / 11kW - 3 phase
CPS 220 / 64 / 22kW- 3 phase
Anschlußklemmen
Terminals
Klemmen
Anschlußraum
Terminals
Stromkreismodule
Circuit modules

14
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
14
4.2. CPUSB 220 / 64 / 16,
CPUSB 220 / 64 / 8 – 1,
CPUSB 220 / 64 / 8 – 9,
CPUSB 220 / 64 / 1 – 2A,
CPUSB 220 / 64 / 1 – 4A
Die BUS-Unterstationen CPUSB 220 / 64 / … ermöglichen
externe Stromkreise an die Zentralbatteriesysteme CPS
220 / 64, CPS 220 / 20 und die Unterstation CPUS 220 /
64 anzuschließen. Über die 3-adrige Versorgungsleitung
werden die BUS-Unterstationen auch bei Netzausfall mit
Spannung versorgt. Die Überwachung und Programmie-
rung erfolgt über das Steuerteil des Zentralbatteriesys-
tems mittels der dreiadrigen Busleitung. Bei Ausfall der
BUS-Kommunikation schalten die Stromkreismodule in
den sicheren Betriebszustand.
Um die projektspezischen Anforderungen optimal
zu unterstützen, sind die BUS-Unterstationen eben-
falls in unterschiedlichen Ausbaustufen erhältlich:
• CPUSB 220 / 64 / 16
In einem 19´´ Modulträger können bis zu 16 Stromkreis-
module mit unterschiedlicher Leistung (1x6A, 2x4A,
4x2A, 2x2,5A 24V, max. 8 Stk.) eingesetzt werden.
• CPUSB 220 / 64 / 8-1, CPUSB 220 / 64 / 8-9
In einem 19´´ Modulträger können bis zu 8 Stromkreis-
module mit unterschiedlicher Leistung (1x6A, 2x4A,
4x2A, 2x2,5A 24V, max. 4 Stk.) eingesetzt werden. Dabei
unterstützt die BUS-Unterstation CPUSB 220 / 64 / 8 – 1
den unteren Adressbereich (1-8), die CPUSB 220 / 64 /
8-9 den oberen Adressbereich (9-16)
• CPUSB 220 / 64 / 1 - 2A, CPUSB 220 / 64 / 1 – 4A
Die BUS-Unterstationen CPUSB 220 / 64 / 1 – 2A und
CPUSB 220 / 64 / 1 – 4A enthalten jeweils ein Stromkreis-
modul mit entweder 4 Stromkreisen á 2A oder 2 Strom-
kreisen á 4A im Wandgehäuse. Ebenso enthalten ist eine
Stromkreisweiche zur Versorgung der Sicherheits- und
Rettungszeichenleuchten aus der lokalen Untervertei-
lung. Über die Eingänge SL+/SL- können DPÜs zur Über-
wachung der lokalen Unterverteilung angeschlossen
werden. Bei Ausfall einer Phase werden die Leuchten der
BUS-Unterstation eingeschaltet.
850009
850008
4
CP 4x2A
3,15A
=DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
=DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
=DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
=DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
=DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
=DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
=DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
=DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
Optionsplätze
Slots
Steuerteil
Controller
Netzanschluß
Mains
Sicherungsabgänge US Netz/ Batt
Substation output
CPUS 220 / 64 / 11kW
Klemmen
Anschlußraum
Terminals
Stromkreismodule
Circuit modules
Sicherungen Batterieanschluß
Fuses battery
4.2. CPUSB 220/64/16,
CPUSB 220/64/8–1,
CPUSB 220/64/8–9,
CPUSB 220/64/1–2A,
CPUSB 220/64/1–4A
The BUS sub stations CPUSB 220/64/… enable external
circuits to be connected to the central battery systems
CPS 220/64, CPS 220/20 and to the sub station CPUS
220/64. The BUS sub stations are supplied with power via
the 3-wire supply cable, even if the power fails. Monito-
ring and programming is carried out via the central batte-
ry system controller by means of the three-wire BUS data
line. If the BUS communication fails, the circuit modules
switch to safe mode.
In order to support project-specic requirements opti-
mally, the BUS sub stations are also available invari-
ous expansion levels:
• CPUSB 220/64/16
Up to 16 circuit modules with various outputs (1x6A,
2x4 A, 4x 2A) can be inserted into one 19" module
carrier.
• CPUSB 220/64/8-1, CPUSB 220/64/8-9
Up to 8 circuit modules with various outputs (1x6 A,
2x4A, 4x2 A) can be inserted into one 19" module
carrier. BUS sub station CPUSB 220/64/8 — 1 supports
thelower address range (1–8), CPUSB 220/64/8-9 the
upper address range (9–16)
• CPUSB 220/64/1 – 2 A, CPUSB 220/64/1 – 4 A
BUS sub stations CPUSB 220/64/1 – 2 A and CPUSB
220/64/1 – 4 A each contain a circuit module with either
4 x 2 A circuits or 2 x 4 A circuits in the wall housing.
They also contain a circuit separating module for
supplying the safety and emergency exit luminaires
from the local sub-distribution board. DPÜs for
monitoring the local sub-distribution board can be
connected via inputs SL+/SL-. If one phase fails, the
luminaires of the BUS sub station are switched on.

15
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
4.2.1. Aufbau der CPUSB - Systeme
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
4
CP 4x2A
3,15A
= DL / M
F
3
3,15A
F
2
3,15A
F
2
3,15A
F
CPUSB 220 / 64 / 16
Klemmen
Anschlußraum
Terminals
Stromkreismodule
Circuit modules
F
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
4
CP 4x2A
3,15 A
= DL / M
F
3
3,15 A
F
2
3,15 A
F
2
3,15 A
F
Stromkreismodule
Circuit modules
CPUSB 220 / 64 / 8-1 CPUSB 220 / 64 / 8-9
Klemmen /Anschlußraum
Terminals
SK1
Bus
SK2
SK3
SK4
CPS
UVA
pot.frei
Kontakte
24V
SL
-SL+
INOTEC
CPUSB 4x2A
1
2
3
4
Adresse
CPUSB 220 / 64 /1–2A
CPUSB 220 / 64 /1–4A
Klemmen
Anschlußraum
Terminals
4.2.1. Layout CPUSB

16
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
16
4.3. CPUSB 220 / 64 / 1 – 2x2,5A/24V
Die BUS-Unterstation CPUSB 220/64/1-2x2,5A/24V
ist nur mit TFT-Steuerteil nutzbar.
Rettungs- und Sicherheitsleuchten mit INOTEC 24V-
Technik und INOTEC 24V-D.E.R.-Leuchten für dynamische
Fluchtwegkennzeichnung können an die externe BUS-
Unterstation CPUSB 220 / 64 / 1 – 2x2,5A / 24V ange-
schlossen werden.
Über die 3-adrige Versorgungsleitung wird die BUS-
Unterstation auch bei Netzausfall mit Spannung versorgt.
Die Überwachung und Programmierung erfolgt über das
Steuerteil des Zentralbatteriesystems mittels der drei-
adrigen Busleitung. Bei Ausfall der BUS-Kommunikation
schalten die Stromkreismodule in den sicheren Betriebs-
zustand.
Im Wandgehäuse sind zwei Stromkreise mit je max. 2,5A
verfügbar. Die enthaltene Stromkreisweiche versorgt die
Sicher- und Rettungszeichenleuchten aus der lokalen
Unterverteilung. Über die Eingänge SL+/SL- können DPÜs
zur Überwachung der lokalen Unterverteilung ange-
schlossen werden. Bei Ausfall einer Phase werden die
Leuchten der BUS-Unterstation eingeschaltet.
4.3.1. Aufbau
SK1
Bus
SK2
SK3
SK4
CPS
UVA
pot.frei
Kontakte
24V
SL
-SL+
INOTEC
CPUSB 24V 2x2,5A
1
2
Adresse
AT
1000
CPUSB 220 / 64 / 1-2x2,5A/24V
Stromkreisklemmmen
Anschlußraum
Terminals
4.3. CPUSB 220 / 64 / 1 – 2x2,5A/24V
The BUS-substation CPUSB 220/64/1-2x2,5A/24V
can only be used with a TFT controller.
Emergency exit and safety luminaires with INOTEC 24V
technology and INOTEC 24V-D.E.R. luminaires for dynamic
escape route signage can be connected to the external
BUS substation CPUSB 220 / 64 / 1 – 2x2.5A / 24V.
The BUS substation is also supplied with power via the
3-wire supply cable in the event of a mains failure. Moni-
toring and programming is done using the central battery
system controller via the 3-wire bus line. In event of a BUS
communication failure, the circuit modules switches to
safe operating state.
Two circuits with each max. 2.5 A are available in the wall
housing. The circuit separating module in the housing
supplies safety and emergency luminaires from the local
sub-distribution board. Three-phase monitoring units can
be connected to monitor sub-distribution boards via the
inputs SL+/SL-. If a phase fails, the luminaires connected
to the BUS substation are switched on.
4.3.1. Design

17
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
4.4. CPUSB 220 / 64 / 24V
Die BUS-Unterstation CPUSB 220 / 64 /24V ermöglicht
den Betrieb und die Überwachung von 24V-Sicherheits-
und Rettungszeichenleuchten an dem Zentralbatteriesys-
tem CPS 220 / 64 bzw. CPS 220 / 20.
Über die dreiadrige gesicherte Versorgungsleitung
wird die BUS-Unterstation vom Zentralbatteriegerät mit
Spannung versorgt. Die Leuchtenbelegung und Ziel-
ortprogrammierung erfolgt über das Steuerteil mittels
INOTEC Kongurator Software desZentralbatteriegerätes,
welches über die dreiadrige BUS-Leitung mit der BUS-
Unterstation kommuniziert.
Die 4 Stromkreisabgänge sind für bis zu 20 Leuchten mit
einer maximalen Anschlussleistung von max.3A je Strom-
kreis geeignet. Die Leuchten werden über eine zweiad-
rige Versorgungsleitung mit 24V-Schutzkleinspannung
versorgt. Die eindeutige Leuchtenadresse wird mit einer
logischen Adresse im Stromkreis verknüpft. Status- und
Fehlerinformationen sind sowohl am Display der BUS-
Unterstation als auch am Steuerteil des Zentralbatteriege-
rätes abrufbar.
Die vier vorhandenen Lichtschalterabfragen können
benutzt werden, um die an der BUS-Unterstation ange-
schlossenen Leuchten zu schalten. Über SL+/SL-
können Dreiphasenüberwachungen angeschlossen
werden, damit bei Ausfall einer Phase in der überwach-
ten Unterverteilung die Leuchten der BUS-Unterstation
eingeschaltet werden.
Optional ist es über das CLS-Dimmer-Modul möglich, ent-
sprechend programmierte Leuchten von zentraler Stelle
aus zu dimmen.
Netz N L
LSA1 N L
LSA2 N L
LSA3 N L
LSA4
LPE N R T G IBa IBpIBp
+24V
T
FSSL+– +– +24V
+– Opt.
Stoer Betr.
Bat.-B. SK1
- +
- +
SK2
- +
- +
SK3
- +
- +
SK4
- +
- +
INOTEC
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
SK 1 SK 2 SK 3 SK 4
Ein/On
Störung
Failure
Ein/On
Störung
Failure
Ein/On
Störung
Failure
Ein/On
Störung
Failure
Lade Störung
Charge failure
Störung
Failure
Batt.-Betrieb
Bat.-Operation
Betrieb
Operation
OK
ESC
CPUSB 220 / 64 / 24V
Stromkreisklemmmen
Anschlußraum
Terminals
Steuerteil
Controller
Wandler
Inverter
4.4. CPUSB 220/64/24 V
The BUS sub station CPUSB 220/64/24 V enables the
operation and monitoring of 24 V safety and emergency
exit luminaires on the central battery systems CPS 220/64
and CPS 220/20.
The BUS sub station is powered from the central battery
device via the three-wire fused supply cable. Luminaire
conguration and destination programming is done
via the central battery controller unit and the INOTEC
Kongurator Software, which communicates with the BUS
sub station via the three-wire BUS data line.
The 4 outgoing circuits are suitable for up to 20 lumi-
naires with a maximum connected output of 3 A per
circuit. The luminaires are supplied with power via a two-
wire supply lead with 24 V safety extra low voltage. The
unique luminaire address is linked to a logical address in
the circuit. Status and fault information can be retrieved
at both the BUS sub station display and the central batte-
ry device controller.
The integrated four channel light sequence switching
device can be used to switch the luminaires connected
to the BUS sub station. Three-phase monitors can be con-
nected via SL+/SL-, so that the luminaires in the BUS sub
station can be switched on if one phase in the monitored
sub-distribution board fails.
The CLS dimmer module is available as an option for
dimming correspondingly programmed luminaires froma
central position.

18
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
18
5. Technische Daten
5.1. CPS 220 / 64, CPS 220 / 20, CPUS 220 / 64
Schutzklasse: I
Schutzart: IP 20
Zulässige Umgebungstemperatur:
für das Gerät: -5°C bis +35°C
für die Batterie: gem. Batteriedatenblatt
Batterie: 216V DC
Farbe: RAL 7035
Sockel (optional): 100mm / 200mm
5. Technical data
5.1. CPS 220/64, CPS 220/20, CPUS 220/64
Protection class: I
Protection category: IP 20
Permissible ambient temperature:
For the device: -5°C to +35°C
For the battery: as per the battery datasheet
Battery: 216 V DC
Colour: RAL 7035
Base (option): 100mm /200mm
Anschlussspannung
Rated voltage 1~N/PE, 230V AC ±10%
50Hz / 60Hz 1~N/PE, 230V AC ±10%
50Hz / 60Hz 3~N/PE, 400V AC ±10%
50Hz / 60Hz
Systemstrom: Intern
System current:Internal 50A 50A 50A
Gesamt
Total 50A 50A 50A
max. Leistung
max. Load 11kW 11kW 11kW
Anzahl freier Baugruppenplätze
Free module slots, max. intern/extern
4x2A, 2x4A, 1x6A, 2x2,5A D.E.R. 16 / 16 16 / 16 16 / 16
2x2,5A 24V max. intern/extern 8 / 16 8 / 16 8 / 16
max. inst. Batterie Kapazität
max. installed battery capacity 75Ah 75Ah 75Ah
Ladestufe
Charger 1 x 3A oder / or 7,5A 2 x 3A oder / or 7,5A 1 x 3A oder / or 7,5A
Anzahl freier TE für Optionen
Space for options 1 x 8 TE
1 x 4 TE 1 x 8 TE
1 x 4 TE 1 x 8 TE
1 x 4 TE
- bei Funktionserhalt
- with function preservation - - -
Max. Anschlussquerschnitt (mm²) für:
Conductor cross section, max. (mm²)
Netzzuleitung
Mains supply 35 35 35
Batteriezuleitung
Battery supply 35 35 35
Lichtstromkreise
Outgoing to luminaries 4 4 4
Datenleitung (RTG)
Outgoing data line (RTG) 4 4 4
BUS-Leitung IB2
Outgoing BUS IB2 4 4 4
24V Stromschleife
Outgoing 24V monitoring 4 4 4
Netzleitung für Unterstationen
Outgoing mains to CPUS 35 35 35
Batterieleitung für Unterstation
Outgoing battery to CPUS 35 35 35
Versorgungsleitung für BUS-Unterstation
Outgoing supply to CPUSB 35 35 35
Abmessungen: H x B x T (mm)
Dimensions: H x W x D (mm) 2030 x 800 x 400 2230 x 800 x 400 2230 x 800 x 400
Funktionserhalt (optional)
With function preservation (option) - - -
- bei Funktionserhalt
- with re preservation - - -
Kabeleinführungen
Cable inlets 22 x M20 22 x M20 22 x M20
64 x M25 64 x M25 64 x M25
6 x M32 6 x M32 6 x M32
2 x M50 2 x M50 2 x M50
Netz
Ladeteil220V/7,5A
Ein
10AT16AT
Batterie
Netz
Ladeteil220V/7,5A
Ein
10AT16AT
Batterie
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
800 mm
1200 mm 1030 mm
Tiefe
Depth
400 mm
CPS 220 / 64/ 11kW -2
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
gem.VDE0108
EMC:gem.EN55015
ta:-15bis40°C
INOTEC
DPÜ/B.1
890414
L3L2L1
N L1 L2 L3
Kontakte(1/2)+(3/4)
öffnenbeiNetzausfall
Adresse
1bis31
EinerZehner
+24V
4
3BUS
1 2
TT
850009
850008
NETZ
Mains
Sub.-db/UVA Stromschleife
Monitoringloop
Fernschalter
Remoteswitch
DL/M
BL/NM
J
Steuerteil
Controller
Verriegelung
Interlock
US
EM-Sub
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
CPS 220 / 64 / 11kW
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
gem.VDE0108
EMC:gem.EN55015
ta:-15bis40°C
INOTEC
DPÜ/B.1
890414
L3L2L1
N L1 L2 L3
Kontakte(1/2)+(3/4)
öffnenbeiNetzausfall
Adresse
1bis31
EinerZehner
+24V
4
3BUS
1 2
TT
850009
850008
NETZ
Mains
Sub.-db/UVA Stromschleife
Monitoringloop
Fernschalter
Remoteswitch
DL/M
BL/NM
J
Steuerteil
Controller
Verriegelung
Interlock
US
EM-Sub
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
Netz
Ladeteil220V/7,5A
Ein
10AT16AT
Batterie
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
800 mm
1200 mm 830 mm
Tiefe
Depth
400 mm
Netz
Ladeteil220V/7,5A
Ein
10AT16AT
Batterie
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
800 mm
1200 mm 1030 mm
NETZ
Mains
Sub.-db/UVA Stromschleife
Monitoringloop
Fernschalter
Remoteswitch
DL/M
BL/NM
J
Steuerteil
Controller
Verriegelung
Interlock
US
EM-Sub
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
Tiefe
Depth
400 mm
CPS 220 / 64 / 11kW-1 CPS 220 / 64 / 11kW-2 CPS 220 / 64 / 11kW-1
3-phasig

19
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
Netz
Ladeteil220V/7,5A
Ein
10AT16AT
Batterie
Netz
Ladeteil220V/7,5A
Ein
10AT16AT
Batterie
Netz
Ladeteil220V/7,5A
Ein
10AT16AT
Batterie
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
2030 mm
Tiefe
Depth
400 mm
CPS 220 / 64 / 11kW 3phasig
800 mm
Netz
Ladeteil220V/7,5A
Ein
10AT16AT
Batterie
Netz
Ladeteil220V/7,5A
Ein
10AT16AT
Batterie
Netz
Ladeteil220V/7,5A
Ein
10AT16AT
Batterie
Netz
Ladeteil220V/7,5A
Ein
10AT16AT
Batterie
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
1
2
3
4
CP4x2A
F
3,15A
=BL/NM
=DL/M
F
3,15A
F
3,15A
F
3,15A
Tiefe
400 mm
2030 mm
CPS 220 / 64 / 22kW 3phasig
800 mm
600 mm
1000 mm 600 mm
Tiefe
Depth
300 mm
CPS 220 / 20 / 1,2A
Achtung!!Sicherungen im Gerät nicht unter Last ziehen.
Anlageblockieren.
Attention!!Donot pull under load.Isolate system.
Batteriesicherung
Batteryfuses behind
hinterderBlende
10A
10A
NETZ
Mains
Sub.-db/UVA Stromschleife
Monitoringloop
Fernschalter
Remoteswitch
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
DL/M
BL/NM
J
Steuerteil
Controller
Verriegelung
Interlock
Ladeteil
Charger
CPS 220 / 64 / 11kW
3-phasig
CPS 220 / 64 / 22kW
3-phasig
CPS 220 / 20 / 1,2A
Anschlussspannung
Rated voltage 3~N/PE, 400V AC ±10%
50Hz / 60Hz 3~N/PE, 400V AC ±10%
50Hz / 60Hz 1~N/PE, 230V AC ±10%
50Hz / 60Hz
Systemstrom: Intern
System current:Internal 50A 63A 7A
Gesamt
Total 50A 100A 7A
max. Leistung
max. Load 11kW 22kW 1,5kW
Anzahl freier Baugruppenplätze
Free module slots, max. intern/extern
4x2A, 2x4A, 1x6A, 2x2,5A D.E.R. 16 / 16 16 / 16 5 / -
2x2,5A 24V max. intern/extern 8 / 16 8 / 16 2 / -
max. inst. Batterie Kapazität
max. installed battery capacity - - 18Ah
Ladestufe
Charger max. 4 x 3A oder / or 7,5A max. 4 x 3A oder / or 7,5A 1,2A
Anzahl freier TE für Optionen
Space for options 31 TE 25 TE 11 TE
- bei Funktionserhalt
- with function preservation - - 19 TE
Max. Anschlussquerschnitt (mm²) für:
Conductor cross section, max. (mm²)
Netzzuleitung
Mains supply 35 35 10
Batteriezuleitung
Battery supply 35 35 35
Lichtstromkreise
Outgoing to luminaries 4 4 4
Datenleitung (RTG)
Outgoing data line (RTG) 4 4 4
BUS-Leitung IB2
Outgoing BUS IB2 4 4 -
24V Stromschleife
Outgoing 24V monitoring 4 4 4
Netzleitung für Unterstationen
Outgoing mains to CPUS 35 35 -
Batterieleitung für Unterstation
Outgoing battery to CPUS 35 35 -
Versorgungsleitung für BUS-Unterstation
Outgoing supply to CPUSB 35 35 -
Abmessungen: H x B x T (mm)
Dimensions: H x W x D (mm)" 2030 x 800 x 400 2030 x 800 x 400 1600 x 600 x 300
Funktionserhalt (optional)
With function preservation (option) - - BRS 10.1
- bei Funktionserhalt
- with re preservation - - 2346 x 894 x 586
Kabeleinführungen
Cable inlets 22 x M20 22 x M20 10 x M20
64 x M25 64 x M25 33 x M25
6 x M32 6 x M32 4 x M32
2 x M50 2 x M50

20
CPS 220/64/SV Montage- und Betriebsanleitung CPS 220/64/SV Mounting and Operating Instructions
20
600 mm
1000 mm 800 mm
Tiefe
Depth
300 mm
CPS 220 / 20 / 3A
CPS 220 / 20 / 5,5kW / 3A
Netz
Ladeteil220V/7,5A
Ein
10AT16AT
Batterie
600 mm
1000 mm 800 mm
Tiefe
Depth
300 mm
CPS 220 / 20 / 3A
CPS 220 / 20 / 5,5kW / 3A
Netz
Ladeteil220V/7,5A
Ein
10AT16AT
Batterie
800 mm
1200 mm 830 mm
Netz
Ladeteil220V/7,5A
Ein
10AT16AT
Batterie
Tiefe
Depth
400 mm
CPS 220 / 20 / 3A CPS 220 / 20 / 5,5kW / 3A CPS 220 / 20 / 5,5kW / 7,5A
Anschlussspannung
Rated voltage 1~N/PE, 230V AC ±10%
50Hz / 60Hz 1~N/PE, 230V AC ±10%
50Hz / 60Hz 1~N/PE, 230V AC ±10%
50Hz / 60Hz
Systemstrom: Intern
System current:Internal 7A 25A 25A
Gesamt
Total 7A 25A 25A
max. Leistung
max. Load 1,5kW 5,5kW 5,5kW
Anzahl freier Baugruppenplätze
Free module slots, max. intern/extern
4x2A, 2x4A, 1x6A, 2x2,5A D.E.R. 5 / - 5 / 16 5 / 16
2x2,5A 24V max. intern/extern 2 / - 2 / 16 2 / 16
max. inst. Batterie Kapazität
max. installed battery capacity 28Ah 28Ah 75Ah
Ladestufe
Charger 3A 3A 7,5A
Anzahl freier TE für Optionen
Space for options 11 TE 11 TE 22 TE
- bei Funktionserhalt
- with function preservation 19 TE 19 TE 19 TE
Max. Anschlussquerschnitt (mm²) für:
Conductor cross section, max. (mm²)
Netzzuleitung
Mains supply 10 10 10
Batteriezuleitung
Battery supply 35 35 35
Lichtstromkreise
Outgoing to luminaries 4 4 4
Datenleitung (RTG)
Outgoing data line (RTG) 4 4 4
BUS-Leitung IB2
Outgoing BUS IB2 - 4 4
24V Stromschleife
Outgoing 24V monitoring 4 4 4
Netzleitung für Unterstationen
Outgoing mains to CPUS - 35 35
Batterieleitung für Unterstation
Outgoing battery to CPUS - 35 35
Versorgungsleitung für BUS-Unterstation
Outgoing supply to CPUSB - 35 35
Abmessungen: H x B x T (mm)
Dimensions: H x W x D (mm)" 1800 x 600 x 300 1800 x 600 x 300 2030 x 800 x 400
Funktionserhalt (optional)
With function preservation (option) BRS 10.1 BRS 10.1 BRS 10.1*1
- bei Funktionserhalt
- with re preservation 2346 x 894 x 586 2346 x 894 x 586 2346 x 894 x 586
Kabeleinführungen
Cable inlets 10 x M20 10 x M20 22 x M20
33 x M25 33 x M25 64 x M25
4 x M32 4 x M32 6 x M32
2 x M50
*1 max. 60Ah
This manual suits for next models
2
Table of contents
Other InoTec Controllers manuals