INOX DC61 Series User manual

10 YEAR WARRANTY
ANSI/BHMA A156.4 GRADE 1 SPECIFICATION
Division 8
GRADE 1 STANDARD DUTY DOOR CLOSER
UNISON HARDWARE, INC.
Version: 2015.10
www.inoxproducts.com

TABLE OF CONTENTS
Exploded Diagram …………………………………………………………
How to Order ………………………………………………………………
Features and Specications ………………………………………………
Arms and Drop Plates ………………………………………………………
Covers, Brackets and Fixing Packs …………………………………………
Mounting Diagrams ………………………………………………………
Page 1
Page 2
Page 3
Page 5
Page 6
Page 7
DC61 Cutaway View
Latch Adjusting Valve
Power Adjusting
Screw
Back Check
Adjusting Valve
Cast Aluminum Alloy Body
Pinion Nut
5/8"(16mm) Pinion Shaft
Secondary Power Spring
Primary Power Spring
1-11/32" (34mm) Diameter Piston
Body Nut
Sweep Adjusting Valve
Disclaimer: All information in this catalog has been deemed accurate as of the date of printing. We are continuously improving and expanding our line in an effort to offer our clients the
nest quality products and services; therefore, Unison Hardware, Inc., reserves the right to alter this information or correct printing errors at any time.
C 2015 Unison Hardware, Inc. All Rights Reserved.

INOX® DC6126/6114 Door Closer
CROSS REFERENCES
NORTON DORMA LCN CAL-ROYAL HAGER SARGENT DOR-O-MATIC PARKER YALE
160 640 1260 300 5300 1130 S660 900 50
01
Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USA
Tel: [phone] Fax: [phone] Email: [email protected] Web: www.inoxproducts.com
Version: 2014.3
DC61 SERIES DOOR CLOSER
DC61 Series Door Closer Cross Reference Chart
1. Pinion Cap
2. Closer Body
3. Pinion Arm Screw
4. Main Arm
5. Arm Pin
6. Pivot Bushing
7. Pivot Screw
8. Round Adjustable Arm
9. Adjustable Arm Bolt
10. Arm Bolt Lock Nut
11. Regular Shoe Plate
12. Bushing
13. Reg / PA Screw
ANSI CODE REFERENCES
ANSI No. Grade 1 Function (Surface Closers - Modern Type, with Cover) INOX® Closer
C02011/C32011 Regular Mounting DC6126/6114SLC
C02021/C32021 Parallel Arm Mounting DC6126/6114SLC
C02041/C32041 Top Jamb Mounting DC6126/6114SLC
ANSI No. Grade 1 Function (Surface Closers - Modern Type, No Cover) INOX® Closer
C03011/C33011 Regular Mounting DC6126/6114LCV
C03021/C33021 Parallel Arm Mounting DC6126/6114LCV
C03041/C33041 Top Jamb Mounting DC6126/6114LCV
PT 4 Options A, B, C, D, E, F, H
Exploded Diagram
Grade 1 Standard Duty Door Closer

Version: 2014.3
02 Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USA
Tel: [phone] Fax: [phone] Email: [email protected] Web: www.inoxproducts.com
DC61 SERIES DOOR CLOSER
Product Identication
DC61 26 HO -LCV -AL
Door Closer Series:
DC61 Series
Power Size 1-6
26 = Power Size 2-6
14 = Power Size 1-4
Finish:
-AL = US28 (689) Aluminum Painted
-DU = US20 (690) Duro/Dark Bronze Painted
-GD = Gold Painted
Cover:
-LCV = Door Closer with Sleeve Arm, Less Cover (Standard)
-SLC = Door Closer with Standard Arm, Slim Plastic Cover
Function:
Blank = Door Closer with Sleeve Arm, Less Cover (Standard)
HO = Door Closer with Friction Hold Open Arm
CUSH = Door Closer with Cush Arm
HCUSH = Door Closer with Hold Open Cush Arm
ST = Door Closer with Slide Track Arm*
STH = Door Closer with Slide Track Hold Open Arm*
* Slide track arm is only available for AL nish
Accessory Product Identication
Item No. Description
DCCV61SLC Plastic Slim Cover for DC61
DCAMHO Friction Hold Open Arm for DC61 Series Door Closer
DCAMCUSH Cush Arm for DC61 Series Door Closer
DCAMHCUSH Hold Open Cush Arm for DC61 Series Door Closer
DCAMST Slide Track Arm for DC61 Series Door Closer
DCAMSTH Slide Track Hold Open Arm for DC61 Series Door Closer
DCDP61P1 Drop Plate for DC61 Series Door Closer Top Jamb, Narrow Drop Plate
DCDP61P2 Drop Plate for DC61 Series Door Closer Parallel Arm, Wide Drop Plate
DCBK Parallel Arm Bracket for DC61
DCFP61 Standard Fixing Pack for DC61 Closer Body
DCFPBK Standard Fixing Pack for Parallel Arm Bracket
DCFPSNB Standard Sex Nuts and Bolts (SNB) Fixing Pack
How to Order

Version: 2014.3
03
Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USA
Tel: [phone] Fax: [phone] Email: [email protected] Web: www.inoxproducts.com
DC61 SERIES DOOR CLOSER
Specications
. DC6114: Adjustable Power Size: 1 Thru 4
. DC6126: Adjustable Power Size: 2 Thru 6
. One piece Aluminum Alloy Body
. Rack-and-Pinion Design
. Separate and independent, latch, sweep and back-check
pressure valves
. DC6114 door closer meets ADA Barrier-Free
requirements (adjustable power size 1 thru 4)
. Non-Handed
. Standard Closer comes Less Cover. Optional Slim Cover
available by special order.
. Tri-packed
. 34mm (1-11/32”) diameter piston
. 16mm (5/8”) diameter pinion journals
. 66.7mm (2-5/8”) projection, without cover
. All standard arm applications with or without cover will
allow doors to swing 180°, conditions permitting
Options
. Hold Open Arm (DCAMHO), Cush Arm (DCAMCUSH),
Hold Open Cush Arm (HCUSH)
. Slide Track (DCAMST): push or pull side mounting
. Slide Track Hold Open Arm (DCAMSTH)
. Drop Plates for Narrow Top Rail (DP)
. Slim Cover (DCCV61SLC)
Finishes
Stocking: AL - US28 (689) Aluminum Painted
Special Order:
DU - US20 (690) Duro/Dark Bronze Painted
GD - Gold Painted
Code Compliance
. ANSI/BHMA A156.4 Grade 1 Closers
. ANSI A117.1 ADA Accessibility (DC6114 Only)
. UL Listed for ANSI/UL10B and UL10C, CAN/ULC S104 up to 3 Hours
. UL 228 UBC Standard 7-2 (1997) NFPA 252
. NFPA 80 National Fire Protection - Fire Door Assembly
. NFPA101 National Fire Protection - Life Safety
. ANSI/BHMA A156.18 Finishes
Features
. Aluminum Alloy Body
Closer bodies are cast of special aluminum alloy and machined
to accommodate interactive steel components under
operation conditions
. Rack & Pinion Operation
Provides a smooth constant control of the door through its full
opening and closing cycle. 180° door swing, can be achieved
when door, frame, and/or arm do not interfere
. Non-Handed
DC6126/DC6114 door closer is non-handed and can be
installed on either right or left hand swing doors
. Sweep Speed Control Valve
Allows adjustment of door speed from the doors 90° open
position down to approximately 10° from the closed
position
. Latch Speed Control Valve
Allows adjustment of door latch speed from approximately 10°
down to the door’s fully closed position
. Tri-Packed
DC61 Series come with self-tapping (SRT), sex nuts & bolts
(SNB) and parallel arm (PA) bracket to allow for regular, top
jamb, and parallel arm installations
. Adjustable Back-Check Valve
Provides control of the door in the opening cycle, beginning
at approximately 75° of door opening. Back check cushions
the door opening when the door is forcibly opened beyond its
preadjusted setting
. Multi-Sized Door Closer
Adjustable through the power range of 1 through 4. DC6114
door closer also conrms to the opening force requirements of
the ADA and ANSI/BHMA standard A117.1 for interior doors
Warranty
10 Year Warranty
DC6114/DC6126 Grade 1 Standard Duty Door Closer

Version: 2014.3
04 Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USA
Tel: [phone] Fax: [phone] Email: [email protected] Web: www.inoxproducts.com
DC61 SERIES DOOR CLOSER
Application Chart
Door
Closer Size
Full Turns of Power
Adjusting Screw
Applicable Door Leaf Width Applicable Door Weight
Interior Exterior (swing out)
1 -6 32" (0.81m) 28" (0.71m) 33~66LBS (15~30kg)
2 -4 36" (0.91m) 32" (0.81m) 66~99LBS (30~45kg)
3 0 (PRE SET) 42" (1.07m) 36" (0.91m) 99~143LB (45~55kg)
4 +5 48" (1.22m) 42" (1.07m) 143~187LBS (65~85kg)
5 +9 54" (1.37m) 48" (1.22m) 187~264LBS (85~120kg)
6 +12 58" (1.47m) 54" (1.37m) 264~330LBS (120~150kg)
The closing force for DC61 series door closers is adjustable from size 1 to size 4, as outlined in ANSI Standard A156.4. When this series of door closers are installed
and adjusted to conrm to ADA reduced opening force requirements (5 Ibs max.) for Interior door, they may not have adequate closing force to reliably close
and latch door. Power adjustments charted on this page are recommended where possible, to ensure proper door control.
CAUTION!!
Do not turn speed adjusting valve more than two (2) full turns counter-clockwise from its order; do not back the valves out of closer or a leak will result.
Power
Adjusting
Screw
Use 4mm Hex
For this
4mm
Wrench
INCREASE
DECREASE
BACKCHECK
Adjusting Valve
LATCH
Adjusting
Valve
SWEEP
Adjusting
Valve
SLOWER
INCREASE
DECREASE
FASTER
CLOSING CYCLE
OPENING CYCLE

Standard Arms
. Regular / Parallel Arm with PA Bracket
- Regular Non-handed arm with adjustable slider can be used
for a wide range of frame conditions, can be mounted to
hinge (pull) side, top jamb.
- For Parallel arm, use parallel arm bracket to mount on stop of
frame on (push) side of the door. Frame should be reinforced
for parallel arm bracket.
Optional Drop Plates – Narrow Top Rail
. For use on doors with glass where the drop plates cover the
back of the closer for a pleasing view from the front.
. Also used when the top rail is narrow preventing the closer to
be mounted to surface of wood or metal.
. Correct installations will permit 180° Maximum Opening.
Please see Drop Plate Installation Guide for detail applications.
DCDP61P1: Drop Plate for DC61 Series Door Closer Regular
arm, narrow drop plate
DCDP61P2: Drop Plate for DC61 Series Door Closer Parallel
arm, wide drop plate
Version: 2014.3
05
Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USA
Tel: [phone] Fax: [phone] Email: [email protected] Web: www.inoxproducts.com
DC61 SERIES DOOR CLOSER
Optional Arms
. Hold Open Arm (DCAMHO)
Non-handed arm with adjustable
round slide arm for a wide range of
frame conditions. Open to desired
range then tighten screw & lock
nut and door will hold in that
position every time until changed.
For parallel mount use parallel
arm bracket.
. Cush Arm (DCAMCUSH)
Non-handed heavy duty forged
arm with cush stop, parallel
arm mount. Must use frame
reinforcement in stop to mount.
. Hold Open Cush Arm
(DCAMHCUSH)
(Optional) Non-handed heavy
duty forged arm with cush stop
and hold open parallel arm
mount. Handle controls the hold
open function. Must use frame
reinforcement in stop to mount.
. Sliding Track (DCAMST)
Single lever (track) arm with a
surface mounted closer designed
for interior use on narrow head
frames and top rails. Oers three
mounting positions: Pull Side,
Push Side and Top Jamb.
Sliding Track Hold Open Arm (DCAMSTH)
The Hold-Open options allows for hold-open points at 85°, 90°,
95°, 100°, 105° or 110° depending on clip location in track.

Version: 2014.3
06 Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USA
Tel: [phone] Fax: [phone] Email: [email protected] Web: www.inoxproducts.com
DC61 SERIES DOOR CLOSER
Optional Covers
. Plastic Slim Cover
Fixing Packs
. Standard xing pack for closer body
Parallel Arm Bracket
. Parallel Arm Bracket
. Standard xing pack for parallel arm bracket
. Standard sex nuts and bolts (SNB) xing pack
DCCV61SLC DCBK
DCFP61
DCFPSNB
DCFPBK

Mounting Diagrams
. Regular Mounting (Pull Side)
- Regular arm is the most common and strongest mounting option. Usually the closer is mounted on the door and the arm is
mounted on the frame.
. Top Jamb Mounting (Push Side)
- Closer body is mounted to the frame with the arm straight out. Ideal for exterior door installations. You must consider frame
depth reveal. Extended arm may be required.
. Parallel Arm Mounting (Push Side)
- Closer body on door with parallel bracket on stop of frame. Arm is parallel to the door and does not stick out.
Parallel arm installations have 25% less power than regular pull side mounting.
Version: 2014.3
07
Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USA
Tel: [phone] Fax: [phone] Email: [email protected] Web: www.inoxproducts.com
DC61 SERIES DOOR CLOSER

Please visit our website
http://www.inoxproducts.com
for more technical and new product information.

Unison Hardware, Inc.
6 Wayne Court, Sacramento, CA 95829, USA
Tel: [phone] Fax: [phone]
http://www.inoxproducts.com
Email: [email protected]