Insignia NS-23ARGLS2 User manual

PACKAGE CONTENTS
• Screen protector (2) • Wet cloth (2)
• Dry cloth (2) • Polishing cloth (2)
• Alignment tool • Quick Setup Guide
• Dust removal adhesive (2)
Note: Wet cloth ingredients contain water and
isopropanol.
FEATURES
• Simple installation with alignment tool helps
to prevent bubbles
• Compatible with most cases
ATTACHING YOUR SCREEN PROTECTOR
1Remove your phone case (for easier install).
Note: To ensure the ngerprint reader works
correctly, please peel o the original lm from
device and then install the INSIGNIA™ glass screen
protector before registering ngerprint.
2To prevent bubbles, clean your phone screen
with the wet cloth, then remove moisture
with the dry cloth.
3Press the dust removal adhesive to your
phone’s screen repeatedly to remove any
remaining debris.
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
Glass Screen Protector
NS-23ARGLS2 / NS-23PARGLS2
Wet
cloth
Dry
cloth
Dust removal
adhesive

4Push the alignment tool onto your
phone until it snaps into place.
5Use tab #1 to peel the backing lm o
the screen protector, then discard the
lm.
6Align the top of the screen protector with
the alignment tool, then press it down from
top to bottom to adhere it to the screen.
7Remove the alignment tool.
8If there are bubbles, press them out toward
the edges of the screen protector.
9Reattach your phone case (if needed), then
remove ngerprints with the polishing cloth.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289
(U.S. and Canada)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2022 Best Buy. All rights reserved.
V1 ENGLISH 22-1028
Alignment
tool
Screen
protector
Alignment
tool