Insignia NS-IR10BK6 User manual

Before using your new product, please read these instructions to prevent any damage.
USER GUIDE
10" Steam Iron
NS-IR10BK6

2
NS-IR10BK6
www.insigniaproducts.com
Insignia 10" Steam Iron
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Main features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Using your iron. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Using your iron for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting the temperature control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Dry ironing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Steam ironing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Spraying the fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using the Burst of Steam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Cleaning and maintaining your iron. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using the self-clean function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Cleaning the exterior of your iron. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Storing your iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
ONE-YEAR LIMITED WARRANTY - INSIGNIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Introduction
Congratulations on your purchase of a high-quality Insignia product. Your NS-IR10BK6
represents the state of the art in steam iron design and is designed for reliable and
trouble-free performance.
IMPORTANT SAFETY INSTRUCTIONS
When using an iron, basic precautions should always be followed, including the
following:
READ ALL INSTRUCTIONS BEFORE USING
1Only use an iron for its intended use.
2To avoid the risk of electric shock, do not immerse the iron in water or other liquids.
3Always turn the iron OFF before plugging or unplugging the iron from the electrical
outlet. Never pull on the cord to disconnect the iron from the electrical outlet;
instead, grasp the plug and pull on the plug to disconnect the iron.
4Do not let the cord touch hot surfaces. Let the iron cool completely before putting
the iron away. Coil the cord loosely around the iron when storing.

3
10" Steam Iron
www.insigniaproducts.com
5Always disconnect the iron from the electrical outlet before filling the iron with water,
emptying the water from the iron, and when the iron is not in use.
6Do not operate the iron with a damaged cord or in the event the iron has been
dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron.
Take it to a qualified serviceman for examination and repair. Incorrect assembly
might result in a risk of electric shock when the iron is used after reassembly.
7Close supervision is required for the iron used by or near children.
8Burns can occur from touching hot metal parts, hot water, or steam. Use caution
when you turn a STEAM IRON upside down – there might be hot water in the
reservoir.
9To avoid a circuit overload, do not operate an iron on the same circuit with another
high wattage appliance.
10 The iron must not be left unattended while it is plugged in.
11 The filling aperture must not be opened during use. Instructions for the safe refilling
of the water reservoir shall be given.
12 The iron must be used and rested on a stable surface.
13 When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable.
14 The iron is not to be used if it has been dropped, if there are visible signs of damage,
or if it is leaking.
15 Never use an extension power cord set that is not approved by a competent
authority. If an extension cord is absolutely necessary, a cord with an ampere rating
equal to or greater than the 15A shall be used. A cord rated for less amperage may
overheat. Care shall be taken to arrange the cord so that it cannot be pulled or the
iron tripped over.
SAVE THESE INSTRUCTIONS

4
NS-IR10BK6
www.insigniaproducts.com
Features
Package contents
• 10" steam iron
• User Guide
Main features
Using your iron
Using your iron for the first time
Some parts of the iron have been slightly greased and, as a result, the iron may smoke
slightly when turned on for the first time. This stops after a few uses.
1Remove any protective films or stickers from the sole plate and the body of the iron.
Clean the sole plate with a soft cloth.
2Test the iron on an old piece of fabric to make sure that the sole plate and water
reservoir are completely clean.
Steam control knob
Sole plate
Burst of Steam pump Power cord
Temperature
control dial
Water inlet cover
Spray pump
Spray nozzle
Temperature
indicator light

5
10" Steam Iron
www.insigniaproducts.com
Setting the temperature control
• Always check the garment label for ironing instructions before ironing the garment.
• If the ironing instructions are missing, use the table below to set the temperature.
• Sort your laundry into fabric types (wool with wool, cotton with cotton, and so on),
then iron the fabrics requiring the lowest temperature setting first, then progress to
fabrics that require higher temperatures (the iron heats up quicker than it cools
down).
• If the fabric consists of various kinds of fibers (such as cotton with polyester), always
select the ironing temperature for the material with the lowest advised temperature.
Dry ironing
1Stand the iron upright and plug it in.
2Turn the temperature control dial to the setting you want.
3Set the steam control knob to 0.
4The temperature indicator turns off when the temperature you want is reached. The
iron is ready for use.
FABRIC LABEL FABRIC TEMPERATURE
DIAL STEAM BURST OF STEAM SPRAY
Acrylic or
Nylon No No Yes
Silk or wool No No Yes
Polyester No No Yes
Cotton or
linen No No Yes
If you see this label on your garment, it means that it cannot be
ironed. DO NOT IRON.

6
NS-IR10BK6
www.insigniaproducts.com
Steam ironing
The steam feature can only be used at higher ironing temperatures. Use the following
settings:
Use for moderate steam
Use for maximum steam
1Open the water inlet cover and fill the iron with water.
2Stand the iron upright and plug it in.
3Turn the temperature control dial to the setting you want.
4The temperature indicator turns off when the temperature you want is reached. The
iron is ready for use.
5Turn the steam control to the required position. Steam starts coming from the holes
in the sole plate.
Choosing the water
• This iron can be used with normal tap water.
• If the water in your area is particularly hard, use distilled or demineralized water.
• Do not use chemically descaled water or any other liquids.
Filling the iron
1Set the steam control knob to 0 and the temperature control dial to OFF.
2Unplug the iron from the wall outlet and wait for the iron to cool down.
3Pour water into the water inlet up to the MAX level of the water reservoir.
4Plug in your iron and stand it upright.
5Turn the temperature control dial to the desired temperature setting. The
temperature indicator turns on.
6When the correct temperature is reached, the temperature indicator turns off. The
temperature indicator turns on and off periodically when the iron turns on or off to
maintain the set temperature.
Spraying the fabric
You can use the spray feature at any time to help eliminate wrinkles. It does not affect the
temperature of the iron.
1Open the water inlet cover and fill the iron with water.
2Aim the spray nozzle at the garment.
3Press the spray pump.
Note: With conventional steam ironing, water may leak from the sole plate if you have
selected too low a temperature. If this happens, turn the temperature control dial to a
higher setting. Steam will be produced as soon as the appropriate temperature has
been reached.

7
10" Steam Iron
www.insigniaproducts.com
Using the Burst of Steam
This feature provides an extra amount of steam to help remove stubborn wrinkles.
1Open the water inlet cover and fill the iron with water.
2Stand the iron upright and plug it in.
3Turn the temperature control dial to the maximum setting.
4The temperature indicator turns off when the temperature you want is reached. The
iron is ready for use.
5Press the Burst of Steam pump. Steam penetrates the garment and removes
stubborn wrinkles.
6Press the Burst of Steam pump a second or third time. Usually, all wrinkles can be
removed within three steam bursts. For best results, wait three seconds between
each burst.
Cleaning and maintaining your iron
Using the self-clean function
You can use the self-clean function to remove scale and impurities from your iron. The
self-clean function should be used approximately once every two weeks. If the water in
your area is very hard, the self-clean function should be used more frequently.
1Unplug the iron.
2Set the steam control knob to the self-clean position.
3Open the water inlet cover and fill the iron with water.
4Select the maximum ironing temperature.
5Plug in the iron.
6When the temperature indicator turns off, unplug the iron.
7Hold the iron over the sink, then press and hold the self-clean button and gently
shake the iron. Steam and boiling water come out of the sole plate and any impurities
and flakes are flushed out.
8Release the self-clean button as soon as all water in the reservoir has been drained.
9Repeat the self-clean process if the iron still contains a lot of impurities.
Cleaning the exterior of your iron
Turn the temperature control dial to OFF, then unplug the iron and let it cool down
completely. Deposits and other residues on the sole plate can be removed with a cloth
soaked in a vinegar/water solution.
The casing may the wiped with a damp cloth and then polished with a dry one.
Note: In addition to a self-clean function, your iron features an anti-scale cartridge,
which reduces scale deposits in the iron and prolongs its operational life. The anti-scale
system is an integral part of your iron and does not require any maintenance.
Notes:
• Never use any abrasives to clean the sole plate.
• Keep the sole plate smooth. Avoid contact with metal objects.

8
NS-IR10BK6
www.insigniaproducts.com
Storing your iron
1Turn the temperature control dial to OFF and set the steam control knob to 0 (no
steam).
2Unplug the iron.
3Pour any remaining water out of the water reservoir.
4Stand the iron upright and let it cool down completely.
5Wind the power cord around the iron.
6Always store the iron in an upright position.
Safety protective cut-out
In the unlikely event of the thermostat failing, the protective cut-out operates to prevent
the iron from overheating. If that occurs, the iron should be taken to the nearest
authorized service facility.
Troubleshooting
CAUTION: Do not try to repair your iron yourself. Doing so invalidates the warranty.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The iron won’t
heat
The iron may not be
plugged in or the
temperature control dial is
not set correctly.
Plug in the iron and turn up the temperature
control dial. If the temperature indicator
does not come on, does a lamp plugged
into the same outlet turn on? If it does, there
is a problem with the iron. Contact customer
service.
Water drips from
the holes in the
sole plate
The chosen temperature is
too low and does not allow
the formation of steam.
Set the temperature control dial in the
steam range (from •• to MAX).
You are using steam while
the iron is not hot enough.
Wait until the temperature indicator turns
off.
You are using the Burst of
Steam button too often.
Wait a few seconds between each use of the
button.
There is too much steam
selected.
Reduce the steam rate.

9
10" Steam Iron
www.insigniaproducts.com
Brown streaks
come through the
sole plate and
stain the fabric
You are using chemical
descaling agents.
Do not add any descaling agents to the
water in the water tank.
You are not using the right
type of water.
Use the self-clean function and refer to
Choosing the water on page 6.
Fabric fibers have
accumulated in the holes of
the sole plate and are
burning.
Use the self-clean function and clean the
sole plate with a damp sponge. Vacuum the
holes of the sole plate from time to time.
Your fabric has not been
rinsed sufficiently or you
have ironed a new garment
before washing it.
Make sure that your laundry is rinsed
sufficiently so as to remove any deposits of
soap or chemical products on new clothes.
The sole plate is
dirty or brown
and can stain the
fabric
You are ironing with an
inappropriate setting
(temperature too high).
Select the appropriate setting.
You are using starch.
Always spray starch onto
the reverse side of the
fabric.
Clean the sole plate with a non-metallic
sponge.
There is little or no
steam
The water tank is empty. Fill it.
Your iron has a build-up of
scale.
Use the self-clean function.
Your iron has been used dry
for too long.
Use the self-clean function.
The sole plate is
scratched or
damaged
You have placed your iron
flat on a metallic rest-plate
or ironed over a zipper.
Always set your iron on its heel.
Steam or water
comes out from
the iron as you
finish filling the
tank
The steam control is not set
to produce steam.
Make sure that the steam control is set to
produce steam.
The water tank is overfilled. Never overfill the water tank. Empty out the
excess water.
The spray nozzle
does not spray
There is not enough water
in the water tank.
Fill up the water tank.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION

10
NS-IR10BK6
www.insigniaproducts.com
Specifications
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.
Dimensions (W × D × H) 10.2 × 4.2 × 4.9 inches (25.8 × 10.6 × 12.4 cm)
Weight 2 lbs. (875 g)
Power 1200 W