Insignia NS-22E400NA14 User manual

QUICK SETUP
GUIDE
22" LED TV
NS-22E400NA14
Included accessories
Which cables do you have?
Your TV has several dierent jacks for connecting devices. For the
best video quality, use the best available connection. Use the cables
that came with your devices.
Note: You can use the HDMI 1/DVI jack to connect a DVI device to your TV. Attach an
HDMI-to-DVI adapter to the end of the HDMI cable. The adapter connects to the DVI
device’s jack. See your online User Guide for more information about dierent types of
HDMI (ARC and DVI).
Note: Images do not necessarily represent the exact design of your television.
Thank you
for purchasing this state-of-the-art
Insignia television. We hope you enjoy
the quality and reliability of this
television for years to come.
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
Features
Front view
Back view
OVER
VIDEO QUALITY
BEST
BETTER
GOOD
GOOD
HDMI video/audio
Component video and analog audio
Composite video and analog audio
Coaxial video/audio
JACK TYPE CABLE CONNECTOR
STOP!
Do not plug your
power cable in until
all other devices have
been connected.
Multi-purpose jacks: You can plug any
device that uses HDMI into either HDMI
jack. However, an ARC or DVI device
must be connected to the
HDMI1 (DVI+ARC) that came with your
ARC or DVI device for more information.
Note: The HDMI1 (DVI+ARC) jack is a
shared jack. This means that you can
connect only one ARC or DVI device at a
time.
Note: The component video and AV
jacks are shared. This means you can
connect only one component video or
AV device at a time. We suggest using
HDMI if your device supports it.
Note: Connect the yellow video cable
connector to the green Y/VIDEO jack
on the back of your TV.
Using component cables (BETTER)
- OR -
Using an AV cable
(GOOD)
Component cable option
AV cable option
MAKING CONNECTIONS
How do I watch TV (cable or satellite receiver) or connect a device such as a DVD or
Blu-ray Disc player, game console, or camcorder?
- OR -
How do I prepare my TV for wall mounting?
• Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages
and scratches. See the instructions that came with your wall mount for more information
about how to correctly mount your TV.
START HERE
How do I attach the stand to my TV?
(not for wall mounting)
You’ll need: A Phillips screwdriver and a soft surface to lay the TV on.
ACarefully place your TV face-down on a cushioned, clean surface
to protect the screen from damages and scratches.
BAlign the stand column with the TV, then secure the stand column to the
TV using three of the provided screws.
C Align the TV stand with the stand column, then secure the TV stand to
the stand column with one of the provided screws.
Note: The appearance of your TV may dier from the illustrations in this guide.
Remote control
and two AAA batteries
Stand column
M4 screws (14mm length)
(4 pcs.)
Before using your new product, please read these instructions to prevent any damage.
C
B
TV stand
TV stand
MENU
INPUT
VOL
CH
COMPONENT OUT
Power indicator
Remote control sensor
USB
HDMI 2
HDMI 1
()
DVI+ ARC
HDMI IN
/
AUDIO OUT
HDMI 2
HDMI 1
()
DVI+ ARC
HDMI IN
How do I connect my TV to an antenna or cable wall jack?
DIGITAL
OUTPUT AUDIO
LR
Y/VIDEO PBPR
COMPONENT IN
AV IN
VGA PC/DVI AUDIO IN
PC IN
ANT/
CABLE IN
(COAXIAL)
DIGITAL
OUTPUT AUDIO
LR
Y/VIDEO PBPR
COMPONENT IN
AV IN
VGA PC/DVI AUDIO IN
PC IN
ANT/
CABLE IN
(COAXIAL)
DIGITAL
OUTPUT AUDIO
LR
Y/VIDEO PBPR
COMPONENT IN
AV IN
VGA PC/DVI AUDIO IN
PC IN
ANT/
CABLE IN
(COAXIAL)
Using an HDMI cable (BEST)
C
M
Y
CM
MY
CY
CMY
K
NS-22E400NA14_12-1320_QSG_V3_ENG_Final.ai 1 2/1/2013 3:07:49 PMNS-22E400NA14_12-1320_QSG_V3_ENG_Final.ai 1 2/1/2013 3:07:49 PM

V3 ENGLISH 12-1320
MOVE SELECT
OK
ENTER
MENU
PREVIOUS
EXIT
EXIT
Set menu language to English, Français, or Español
TV SETUP
Choose your Menu Language
Français
Español
English
4
22" LED TV IQUICK SETUP GUIDE I NS-22E400NA14
One-year limited warranty
Visit www.insigniaproducts.com for details.
Need additional help?
See your online User Guide! This
comprehensive guide includes everything
from basic how-to steps to more advanced
features. A copy of your User Guide is not
provided in the box but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
Check out our online community forum at
www.insigniaproducts.com for helpful
information from other Insignia TV owners.
We’re here for you
www.insigniaproducts.com
For customer service, call:
877-467-4289
(U.S./Canada markets)
INSIGNIA is a registered trademark of BBY Solutions, Inc.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC,
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2013 BBY Solutions, Inc.
All Rights Reserved
1-877-467-4289
www.insigniaproducts.com
Using digital audio
Using analog audio
Note: Refer to the instructions that came
with your speakers for more information.
Note: Refer to the instructions that came
with your speakers for more information.
I already have a universal remote control. How do I make it control this TV?
Using your remote control
The best time to turn on your TV is after you have attached the TV
stand or wall-mounted your TV and connected all devices.
1 Plug the power cord into a power outlet.
2Install the remote control batteries.
3Press (power) on your remote control.
4Follow the on-screen instructions.
UNIVERSAL REMOTE TV CODES
CABLE BOX, SATELLITE BOX, OR OTHER SET-TOP BOX
Cablevision 068, 069, 078, 096, 100, 164, 168, 229, 026
Charter 2002, 1204, 1423, 1517, 0171, 1963, 0463, 1463, 0842, 1326, 167, 415, 424, 450, 456, 461,
507, 523, 567, 577, 586
Comcast 10171, 11204, 11326, 11463, 11517, 11641, 11780, 11785, 11892, 11963, 12002
Cox 1326, 1463
Direct TV 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002
Dish Network 720
Time Warner 400, 450, 461, 456, 10463, 1463, 0463
Tivo 0091
Verizon 0198, 0490
One for All 0054
Philips 0198, 0490
RCA 135
Sony 068, 069, 078, 096
If you already have a universal remote control that you would like to program to work with your TV and don’t
want to use the included Insignia remote control, see the table for common codes.
CONNECTING AUDIO DEVICES
How do I connect my TV to external speakers?
- OR -
For an up-to-date list of codes for other
cable providers and universal remote brands,
scan this QR code or visit
www.insigniaproducts.com/remotecodes
TURNING ON MY TV
When can I turn on my TV?
UNIVERSAL REMOTE CONTROLS
NORMAL: Displays the original 4:3 aspect
ratio with vertical black bars on the left
and right sides of the screen.
ZOOM:
screen. The top and bottom of the image
may be cropped.
WIDE: Displays content recorded in a
16:9 (wide-screen) aspect ratio.
CINEMA: Stretches the image at the
edges, but keeps a clear image in the
center.
AUTO: Automatically adjusts the image
based on the screen size and the TV
program. Select this option if you are
uncertain which aspect ratio to choose.
Note: Auto is only available when Auto
Aspect Ratio in the CHANNELS menu is
set to On.
What are my screen-size options?
TV
HDMI 1
HDMI 2
VGA
Component/AV
USB(Photos)
INPUT SOURCE
INPUT
Opens the INPUT SOURCE list.
Power
Turns your TV on or o.
Numbers
Enter channel numbers and
parental control password.
■
Enter a digital sub-channel
number (for example 4.1).
Menu
Opens the on-screen menu.
ENTER
Conrms selections or changes
or opens a sub-menu.
EXIT
Closes the on-screen menu.
ASPECT
Changes how the picture is
displayed on the screen.
Volume
Changes the volume.
SLEEP
Sets the sleep timer.
FAVORITE
Opens the Favorite Channel List.
INlink Controls
Control HDMI-CEC devices
connected to your TV.
RECALL
Returns to the previous channel.
HOME
Opens the on-screen menu.
Arrows
Navigate in on-screen menus.
INFO*
Opens a TV status banner.
CCD
Turns closed captioning on or o.
MUTE
Mutes the sound.
Channel
Changes the TV channels.
MTS/SAP
Analog TV – Cycles through mono, stereo,
and secondary audio for analog programs.
Digital TV – Selects the audio language
from the current channel.
PICTURE
Selects the picture mode.
AUDIO
Selects the audio mode.
Power outlet
Power cord
COAXIAL
AUDIO IN
USB
HDMI 2
HDMI 1
()
DVI+ ARC
HDMI IN
/
AUDIO OUT
DIGITAL
OUTPUT AUDIO
LR
Y/VIDEO PBPR
COMPONENT IN
AV IN
VGA PC/DVI AUDIO IN
PC IN
ANT/
CABLE IN
(COAXIAL)
MOVE EXIT
PREVIOUS
SELECT
OK
ENTER
MENU EXIT
Picture Mode
Brightness
Contrast
Color
Tint
Custom
50
Sharpness
Advanced Video
Backlight
50
50
0
50
30
Adjust settings to affect picture quality.
PICTURE
PICTURE AUDIO CHANNELS SETTINGS
C
M
Y
CM
MY
CY
CMY
K
NS-22E400NA14_12-1320_QSG_V3_ENG_Final.ai 2 2/1/2013 3:07:56 PMNS-22E400NA14_12-1320_QSG_V3_ENG_Final.ai 2 2/1/2013 3:07:56 PM