Insignia NS-32D510NA15 User manual

QUICK SETUP
GUIDE
32" LED TV
NS-32D510NA15
Included accessories
Which cables do you have?
Your TV has several dierent jacks for connecting devices. For the
best video quality, use the best available connection. Use the cables
that came with your devices.
Note: You can also connect a DVI device to your TV. See your online User Guide for connection instructions.
Note: Images may not necessarily represent the exact design of your television.
Thank you
for purchasing this state-of-the-art
Insignia television. We hope you enjoy
the quality and reliability of this
television for years to come.
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product
Information, then click .
Features
Front view
Back view
OVER
STOP!
Do not plug your
power cord in until all
other devices have
been connected.
Multi-purpose jacks: You can connect
any device that uses HDMI to either
HDMI jack. However, certain devices
must be connected to the HDMI 1
(DVI+ARC) or HDMI 2 (MHL) jack.
See the instructions that came with
your MHL, DVI, or ARC device.
Note: The HDMI 1 (DVI+ARC) jack is a
shared jack. This means you can only
connect one ARC or DVI device at a
time.
Note: The component video and AV
jacks are shared. This means you can
connect only one component video or
AV device at a time. We suggest using
HDMI if your device supports it.
How do I connect my TV to an antenna or cable wall jack?
MAKING CONNECTIONS
How do I watch TV (cable or satellite receiver) or connect a device such as a DVD or
Blu-ray Disc player, game console, or camcorder?
- OR -
How do I prepare my TV for wall mounting?
(not for use with a TV stand)
• Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages
and scratches. See the instructions that came with your wall mount for more information about
how to correctly mount your TV.
START HERE
How do I attach the stand to my TV?
(not for wall mounting)
You’ll need: A Phillips screwdriver and a soft surface to lay the TV on.
A Carefully place your TV face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
B
Align the stand column with the TV, then secure the stand column to the TV
using the three provided T4 × 12 mm screws (the short screws).
C Align the TV stand with the stand column, then secure the TV stand to the stand
column using the provided T4 × 14 mm screw (the long screw).
Note: The appearance of your TV may dier from the illustrations in this guide.
AB
Front
Using component cables (BETTER)
- OR -
Using an AV cable (GOOD)
Power indicatorRemote control sensor
Remote control
and two AAA batteries
Stand column
TV stand
T4 screw (14 mm length)
(1 pc. )
T4 screws (12 mm length)
(3 pcs.)
C
DIGITAL
OUTP UT
(OPTICAL)
AUDIO
L R Y/VIDEO PBPR
COMPONENT IN
AV IN
VGA PC/DVI AUDI O IN
PC IN
ANT/
CABLE IN
DIGITAL
OUTPUT
(OPTICAL)
AUDIO
L R Y/VIDEO PBPR
COMPONENT IN
AV IN
VGA PC/DVI AUDIO IN
PC IN
ANT/
CABLE IN
CABLE
HDMI video/audio
Component video and analog audio
Composite video and analog audio (AV)
Coaxial video/audio
VIDEO QUALITY
BEST
BETTER
GOOD
GOOD
JACK TYPE CABLE CONNECTOR
Before using your new product, please read these instructions to prevent any damage.
T4 × 14 mm screw
HDMI IN
USB
HDMI 2
( )
MHL
HDMI 1
( )
DVI+ARC
/
AUDIO OUT
DIGITAL
OUTPUT
(OPTICAL)
AUDIO
L R Y/VIDEO PBPR
COMPONENT IN
AV IN
VGA PC/DVI AUDIO IN
PC IN
ANT/
CABLE IN
HDMIIN
USB
HDMI 2
( )
MHL
HDMI1
()
DVI+AR C
/
AUDIO OU T
HDMI IN
USB
HDMI 2
( )
MHL
HDMI 1
()
DVI+ARC
/
AUDIO OUT
Component cable option
AV cable option
Note: Connect the yellow video
cable connector to the green
Y/VIDEO jack on the back of your TV.
AUDIO/VIDEO
OUT
AUDIO/VIDEO OUT
DIG ITAL
OUTPUT
(OPTICAL)
AUDIO
L R Y/VIDEO PBPR
COMPONENT IN
AV IN
VGA P C/DV I AUDI O IN
PC IN
ANT/
CABLE IN
DIGITAL
OUTPUT
(OPTICAL)
AUDIO
L R Y/VIDEO PBPR
COMPONENT IN
AV IN
VGA PC/DVI AUDIO IN
PC IN
ANT/
CABLE IN
T4 × 12 mm screws

32" LED TV IQUICK SETUP GUIDE I NS-32D510NA15
One-year limited warranty
Visit www.insigniaproducts.com for details.
Need additional help?
See your online User Guide! This
comprehensive guide includes everything
from basic how-to steps to more advanced
features. A copy of your User Guide is not
provided in the box but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
Check out our Support Community
http://community.insigniaproducts.com/
for helpful information from other Insignia
TV owners.
We’re here for you
www.insigniaproducts.com
For customer service, call:
877-467-4289 (U.S./Canada)
INSIGNIA is a registered trademark of BBY Solutions, Inc.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC,
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 BBY Solutions, Inc.
All Rights Reserved
1-877-467-4289
www.insigniaproducts.com
Using digital audio
Using analog audio
Note: Refer to the instructions that came
with your speakers for more information.
Note: Refer to the instructions that came
with your speakers for more information.
I already have a universal remote control. How do I make it control this TV?
Using your remote control
The best time to turn on your TV is after you have attached
the TV stand or wall-mounted your TV and
connected all devices.
1 Plug the power cord into a power outlet.
2 Install the remote control batteries.
Remove the remote control cover and
install the batteries, matching
the + and - symbols.
3Press (power) on your remote control.
4Follow the on-screen instructions.
UNIVERSAL REMOTE TV CODES
CABLE BOX, SATELLITE BOX, OR OTHER SET-TOP BOX
Cablevision 068, 069, 078, 096, 100, 164, 168, 229, 026
2002, 1204, 1423, 1517, 0171, 1963, 0463, 1463, 0842, 1326, 167, 415, 424, 450, 456, 461,
507, 523, 567, 577, 586
Comcast 10171, 11204, 11326, 11463, 11517, 11641, 11780, 11785, 11892, 11963, 12002
Cox 1326, 1463
Direct TV 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002
Dish Network 720
Time Warner 400, 450, 461, 456, 10463, 1463, 0463
Tivo 0091
Verizon 0198, 0490
One for All 0054
Philips 0198, 0490
RCA 135
Sony 068, 069, 078, 096
CONNECTING AUDIO DEVICES
How do I connect my TV to external speakers?
For an up-to-date list of codes for other
cable providers and universal remote brands,
scan this QR code or visit
www.insigniaproducts.com/remotecodes
TURNING ON MY TV
When can I turn on my TV?
UNIVERSAL REMOTE CONTROLS
V1 ENGLISH 13-1027
On your TV, set the Digital Audio/SPDIF
option on the AUDIO menu to PCM.
If you already have a universal remote control that you would like to program to work with your TV and don’t
want to use the included Insignia remote control, see the table for common codes.
- OR -
Charter
SOUNDBAR
AUDIO IN
SOUNDBAR
DIGITAL
AUDIO IN
HDMI IN
USB
HDMI 2
( )
MHL
HDMI 1
()
DVI+ARC
/
AUDIO OUT
HDMI IN
USB
HDMI 2
( )
MHL
HDMI 1
()
DVI+ARC
/
AUDIO OUT
4
Recall
Returns to the previous channel.
Arrows
Navigate in on-screen menus.
Home
Opens the MHL device’s home menu
when a MHL device is plugged in.
INFO*
Opens a TV status banner.
CCD
Turns closed captioning on or o.
MUTE
Mutes the sound.
Channel
Changes the TV channels.
MTS/SAP
Analog TV – Cycles through mono,
stereo, and secondary audio for
analog programs.
Digital TV – Selects the audio
language for the current channel.
PICTURE
Selects the picture mode.
AUDIO
Selects the audio mode.
Numbers
Enter channel numbers.
Enters a digital sub-channel
number (for example 4.1).
ENTER
Conrms selections or changes.
MENU
Opens the on-screen menu.
EXIT
Closes the on-screen menu.
ASPECT
Changes how the picture is
displayed on the screen.
Volume
Changes the volume.
SLEEP
Sets the sleep timer.
FAVORITE
Opens the Favorite Channel List.
Media controls
USB – Control the photo slideshow.
INlink – Control HDMI-CEC devices
connected to your TV.
INPUT
Opens the INPUT SOURCE list.
Power
Turns your TV on or o.
NORMAL: Original aspect ratio is
preserved. Black bars are present if content
is not widescreen (16:9).
ZOOM: Expands the image to ll the
screen. The top and bottom of the image
may be cropped.
WIDE: Displays content recorded in a
16:9 (wide-screen) aspect ratio.
CINEMA: Stretches the image at the
edges, but keeps a clear image in the
center.
AUTO: Automatically adjusts the image based
on the screen size and the TV program. Select
this option if you are uncertain which aspect
ratio to choose. Note: Auto is only available
when Auto Aspect Ratio in the Channels
menu is set to On.
What are my screen-size options?
DIG ITAL
OUTPUT
(OPTICAL)
AUDIO
L R Y/VIDEO PBPR
COMPONENT IN
AV IN
VGA P C/DV I AUDI O IN
PC IN
ANT/
CABLE IN
DIGITAL
OUTPUT
(OPTICAL)
AUDIO
L R Y/VIDEO PBPR
COMPONENT IN
AV IN
VGA PC/DVI AUDIO IN
PC IN
ANT/
CABLE IN
Auto
PCM
Select to output audio in two-channel stereo format.