Insignia NS-MDMIC20 User manual
FEATURES
• 3.5 mm connector plug for use with your
mobile phone or tablet
• Directional design minimizes distracting
ambient noise
• Premium metal housing with pro-grade
microphone provides superior sound
COMPATIBILITY
Designed for mobile phones and tablets.
Compatibility with other devices is not
guaranteed.
NOTE: Before using this microphone, record a short audio
segment to make sure that the microphone is working
correctly.
PACKAGE CONTENTS
• Directional microphone
• Carrying pouch
• Quick Setup Guide
USING YOUR MICROPHONE
1Plug the 3.5 mm connector into your
recording device’s audio input jack.
2Tilt and turn the microphone towards the
subject you want to record.
NOTE: Sound is primarily picked up through the 7
round holes on the front of the microphone.
3Turn on your recording device, then record
a short audio segment to make sure that
the microphone is working correctly:
• If sound is too quiet, move the
microphone closer.
• If sound is distorted, the audio is too
loud. Move the microphone farther
away.
4Use your recording device to record the
audio you need.
Before using your new product,
please read these instructions to prevent any damage.
Quick Setup Guide |NS-MDMIC20
Directional Microphone
Microphone
3.5 mm connector
Flat size (W×H): 9 x 4 in. (228.6 x 101.6 mm)
Flat size (W×H): 3 x 4 in. (76.2 x 101.6 mm)
C
M
Y
CM
MY
CY
CMY
K
NS-MDMIC20_16-0084_QSG_V1_EN.ai 1 3/7/2016 2:06:25 PMNS-MDMIC20_16-0084_QSG_V1_EN.ai 1 3/7/2016 2:06:25 PM
TROUBLESHOOTING
Too much ambient noise is picked up
• Move the microphone closer to the
subject. A certain amount of ambient
noise is unavoidable in loud
environments.
• Make sure that the microphone is tilted
towards the subject.
Microphone does not record audio
• Make sure that the 3.5 mm connector is
connected to your recording device’s
INPUT jack.
• Make sure that the 3.5 mm connector is
fully inserted into the audio jack. You may
need to remove your device's case.
• Make sure that your device is recording
audio.
• Move the microphone closer to the
subject.
SPECIFICATIONS
Polar pattern: Omni-directional
Frequency pattern: 35-18KHz (±3 dB)
Signal/Noise: 76dB SPL
Sensitivity: -30dB (±3dB)
Connector: 3.5mm TRRS connection
Weight: 0.6 oz. (18 g)
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289 (U.S.
and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries. Distributed by Best Buy Purchasing,
LLC, 7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2016 Best Buy. All rights reserved. Made in China
V1 ENGLISH 16-0084
C
M
Y
CM
MY
CY
CMY
K
NS-MDMIC20_16-0084_QSG_V1_EN.ai 2 3/7/2016 2:06:25 PMNS-MDMIC20_16-0084_QSG_V1_EN.ai 2 3/7/2016 2:06:25 PM
Other Insignia Microphone manuals
